From: Viresh Kumar <viresh.kumar@linaro.org>
To: Rafael Wysocki <rjw@rjwysocki.net>,
Viresh Kumar <vireshk@kernel.org>, Nishanth Menon <nm@ti.com>,
Stephen Boyd <sboyd@codeaurora.org>
Cc: linaro-kernel@lists.linaro.org, linux-pm@vger.kernel.org,
linux-kernel@vger.kernel.org,
Vincent Guittot <vincent.guittot@linaro.org>,
Viresh Kumar <viresh.kumar@linaro.org>,
Krzysztof Kozlowski <krzk@kernel.org>,
Masahiro Yamada <yamada.masahiro@socionext.com>,
Mark Rutland <mark.rutland@arm.com>,
Rob Herring <robh@kernel.org>,
devicetree@vger.kernel.org
Subject: [PATCH V5 resend] PM / OPP: Use - instead of @ for DT entries
Date: Mon, 8 May 2017 09:52:50 +0530 [thread overview]
Message-ID: <f8323bb507a97755c7c164f1d2aff45d2f0be3f0.1494217312.git.viresh.kumar@linaro.org> (raw)
Compiling the DT file with W=1, DTC warns like follows:
Warning (unit_address_vs_reg): Node /opp_table0/opp@1000000000 has a
unit name, but no reg property
Fix this by replacing '@' with '-' as the OPP nodes will never have a
"reg" property.
Reported-by: Krzysztof Kozlowski <krzk@kernel.org>
Reported-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
---
@Rafael: This one needs to go via the PM tree and so sending it again.
Documentation/devicetree/bindings/opp/opp.txt | 38 +++++++++++++--------------
1 file changed, 19 insertions(+), 19 deletions(-)
diff --git a/Documentation/devicetree/bindings/opp/opp.txt b/Documentation/devicetree/bindings/opp/opp.txt
index 63725498bd20..e36d261b9ba6 100644
--- a/Documentation/devicetree/bindings/opp/opp.txt
+++ b/Documentation/devicetree/bindings/opp/opp.txt
@@ -186,20 +186,20 @@ Example 1: Single cluster Dual-core ARM cortex A9, switch DVFS states together.
compatible = "operating-points-v2";
opp-shared;
- opp@1000000000 {
+ opp-1000000000 {
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <975000 970000 985000>;
opp-microamp = <70000>;
clock-latency-ns = <300000>;
opp-suspend;
};
- opp@1100000000 {
+ opp-1100000000 {
opp-hz = /bits/ 64 <1100000000>;
opp-microvolt = <1000000 980000 1010000>;
opp-microamp = <80000>;
clock-latency-ns = <310000>;
};
- opp@1200000000 {
+ opp-1200000000 {
opp-hz = /bits/ 64 <1200000000>;
opp-microvolt = <1025000>;
clock-latency-ns = <290000>;
@@ -265,20 +265,20 @@ independently.
* independently.
*/
- opp@1000000000 {
+ opp-1000000000 {
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <975000 970000 985000>;
opp-microamp = <70000>;
clock-latency-ns = <300000>;
opp-suspend;
};
- opp@1100000000 {
+ opp-1100000000 {
opp-hz = /bits/ 64 <1100000000>;
opp-microvolt = <1000000 980000 1010000>;
opp-microamp = <80000>;
clock-latency-ns = <310000>;
};
- opp@1200000000 {
+ opp-1200000000 {
opp-hz = /bits/ 64 <1200000000>;
opp-microvolt = <1025000>;
opp-microamp = <90000;
@@ -341,20 +341,20 @@ DVFS state together.
compatible = "operating-points-v2";
opp-shared;
- opp@1000000000 {
+ opp-1000000000 {
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <975000 970000 985000>;
opp-microamp = <70000>;
clock-latency-ns = <300000>;
opp-suspend;
};
- opp@1100000000 {
+ opp-1100000000 {
opp-hz = /bits/ 64 <1100000000>;
opp-microvolt = <1000000 980000 1010000>;
opp-microamp = <80000>;
clock-latency-ns = <310000>;
};
- opp@1200000000 {
+ opp-1200000000 {
opp-hz = /bits/ 64 <1200000000>;
opp-microvolt = <1025000>;
opp-microamp = <90000>;
@@ -367,20 +367,20 @@ DVFS state together.
compatible = "operating-points-v2";
opp-shared;
- opp@1300000000 {
+ opp-1300000000 {
opp-hz = /bits/ 64 <1300000000>;
opp-microvolt = <1050000 1045000 1055000>;
opp-microamp = <95000>;
clock-latency-ns = <400000>;
opp-suspend;
};
- opp@1400000000 {
+ opp-1400000000 {
opp-hz = /bits/ 64 <1400000000>;
opp-microvolt = <1075000>;
opp-microamp = <100000>;
clock-latency-ns = <400000>;
};
- opp@1500000000 {
+ opp-1500000000 {
opp-hz = /bits/ 64 <1500000000>;
opp-microvolt = <1100000 1010000 1110000>;
opp-microamp = <95000>;
@@ -409,7 +409,7 @@ Example 4: Handling multiple regulators
compatible = "operating-points-v2";
opp-shared;
- opp@1000000000 {
+ opp-1000000000 {
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <970000>, /* Supply 0 */
<960000>, /* Supply 1 */
@@ -422,7 +422,7 @@ Example 4: Handling multiple regulators
/* OR */
- opp@1000000000 {
+ opp-1000000000 {
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <975000 970000 985000>, /* Supply 0 */
<965000 960000 975000>, /* Supply 1 */
@@ -435,7 +435,7 @@ Example 4: Handling multiple regulators
/* OR */
- opp@1000000000 {
+ opp-1000000000 {
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <975000 970000 985000>, /* Supply 0 */
<965000 960000 975000>, /* Supply 1 */
@@ -467,7 +467,7 @@ Example 5: opp-supported-hw
status = "okay";
opp-shared;
- opp@600000000 {
+ opp-600000000 {
/*
* Supports all substrate and process versions for 0xF
* cuts, i.e. only first four cuts.
@@ -478,7 +478,7 @@ Example 5: opp-supported-hw
...
};
- opp@800000000 {
+ opp-800000000 {
/*
* Supports:
* - cuts: only one, 6th cut (represented by 6th bit).
@@ -510,7 +510,7 @@ Example 5: opp-supported-hw
compatible = "operating-points-v2";
opp-shared;
- opp@1000000000 {
+ opp-1000000000 {
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt-slow = <915000 900000 925000>;
opp-microvolt-fast = <975000 970000 985000>;
@@ -518,7 +518,7 @@ Example 5: opp-supported-hw
opp-microamp-fast = <71000>;
};
- opp@1200000000 {
+ opp-1200000000 {
opp-hz = /bits/ 64 <1200000000>;
opp-microvolt-slow = <915000 900000 925000>, /* Supply vcc0 */
<925000 910000 935000>; /* Supply vcc1 */
--
2.12.0.432.g71c3a4f4ba37
next reply other threads:[~2017-05-08 4:22 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-05-08 4:22 Viresh Kumar [this message]
2017-05-23 1:36 ` Stephen Boyd
2017-06-22 3:45 [PATCH V5 Resend] " Viresh Kumar
2017-06-23 23:45 ` Rafael J. Wysocki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=f8323bb507a97755c7c164f1d2aff45d2f0be3f0.1494217312.git.viresh.kumar@linaro.org \
--to=viresh.kumar@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk@kernel.org \
--cc=linaro-kernel@lists.linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=nm@ti.com \
--cc=rjw@rjwysocki.net \
--cc=robh@kernel.org \
--cc=sboyd@codeaurora.org \
--cc=vincent.guittot@linaro.org \
--cc=vireshk@kernel.org \
--cc=yamada.masahiro@socionext.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®