mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Hannes Reinecke <hare@suse.de>
To: David Hildenbrand <david@redhat.com>, Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>,
	linux-mm@kvack.org, linux-kernel@vger.kernel.org,
	Hannes Reinecke <hare@kernel.org>
Subject: Re: [RFC] Disable auto_movable_ratio for selfhosted memmap
Date: Mon, 28 Jul 2025 11:37:46 +0200	[thread overview]
Message-ID: <f859e5c3-7c96-4d97-a447-75070813450c@suse.de> (raw)
In-Reply-To: <79919ace-9cd2-4600-9615-6dc26ba19e19@redhat.com>

On 7/28/25 11:10, David Hildenbrand wrote:
> On 28.07.25 11:04, Michal Hocko wrote:
>> On Mon 28-07-25 10:53:08, David Hildenbrand wrote:
>>> On 28.07.25 10:48, Michal Hocko wrote:
>>>> On Mon 28-07-25 10:15:47, Oscar Salvador wrote:
>>>>> Hi,
>>>>>
>>>>> Currently, we have several mechanisms to pick a zone for the new 
>>>>> memory we are
>>>>> onlining.
>>>>> Eventually, we will land on zone_for_pfn_range() which will pick 
>>>>> the zone.
>>>>>
>>>>> Two of these mechanisms are 'movable_node' and 'auto-movable' policy.
>>>>> The former will put every single hotpluggled memory in ZONE_MOVABLE
>>>>> (unless we can keep zones contiguous by not doing so), while the 
>>>>> latter
>>>>> will put it in ZONA_MOVABLE IFF we are within the established ratio
>>>>> MOVABLE:KERNEL.
>>>>>
>>>>> It seems, the later doesn't play well with CXL memory where CXL 
>>>>> cards hold really
>>>>> large amounts of memory, making the ratio fail, and since CXL cards 
>>>>> must be removed
>>>>> as a unit, it can't be done if any memory block fell within
>>>>> !ZONE_MOVABLE zone.
>>>>
>>>> I suspect this is just an example of how our existing memory hotplug
>>>> interface based on memory blocks is just suoptimal and it doesn't fit
>>>> new usecases. We should start thinking about how a new v2 api should
>>>> look like. I am not sure how that should look like but I believe we
>>>> should be able to express a "device" as whole rather than having a very
>>>> loosely bound generic memblocks. Anyway this is likely for a longer
>>>> discussion and a long term plan rather than addressing this particular
>>>> issue.
>>>
>>> We have that concept with memory groups in the kernel already.
>>
>> I must have missed that. I will have a look, thanks! Do we have any
>> documentation for that? Memory group is an overloaded term in the
>> kernel.
> 
> It's an internal concept so far, the grouping is not exposed to user space.
> 
> We have kerneldoc for e.g., "struct memory_group". E.g., from there
> 
> "A memory group logically groups memory blocks; each memory block 
> belongs to at most one memory group. A memory group corresponds to a 
> memory device, such as a DIMM or a NUMA node, which spans multiple 
> memory blocks and might even span multiple non-contiguous physical 
> memory ranges."
> 
>>
>>> In dax/kmem we register a static memory group. It will be considered one
>>> union.
>>
>> But we still do export those memory blocks and let udev or whoever act
>> on those right? If that is the case then ....
> 
> Yes.
> 
>>
>> [...]
>>
>>> daxctl wants to online memory itself. We want to keep that memory 
>>> offline
>>> from a kernel perspective and let daxctl handle it in this case.
>>>
>>> We have that problem in RHEL where we currently require user space to
>>> disable udev rules so daxctl "can win".
>>
>> ... this is the result. Those shouldn't really race. If udev is suppose
>> to see the device then only in its entirity so regular memory block
>> based onlining rules shouldn't even see that memory. Or am I completely
>> missing the picture?
> 
> We can't break user space, which relies on individual memory blocks.
> 
> So udev or $whatever will right now see individual memory blocks. We 
> could export the group id to user space if that is of any help, but at 
> least for daxctl purposes, it will be sufficient to identify "oh, this 
> was added by dax/kmem" (which we can obtain from /proc/iomem) and say 
> "okay, I'll let user-space deal with it."
> 
> Having the whole thing exposed as a unit is not really solving any 
> problems unless I am missing something important.
> 
Basically it boils down to:
Who should be responsible for onlining the memory?

As it stands we have two methods:
- user-space as per sysfs attributes
- kernel policy

And to make matters worse, we have two competing user-space programs:
- udev
- daxctl
neither of which is (or can be made) aware of each other.
This leads to races and/or inconsistencies.

As we've seen the current kernel policy (cf the 'ratio' discussion)
doesn't really fit how users expect CXL to work, so one is tempted to
not having the kernel to do the onlining. But then the user is caught
in the udev vs daxctl race, requiring awkward cludges on either side.

Can't we make daxctl aware of udev? IE updating daxctl call out to
udev and just wait for udev to complete its thing?
At worst we're running into a timeout if some udev rules are garbage,
but daxctl will be able to see the final state and we would avoid
the need for modifying and/or moving udev rules.
(Which, incidentally, is required on SLES, too :-)

Discussion point for LPC?

Cheers,

Hannes
-- 
Dr. Hannes Reinecke                  Kernel Storage Architect
hare@suse.de                                +49 911 74053 688
SUSE Software Solutions GmbH, Frankenstr. 146, 90461 Nürnberg
HRB 36809 (AG Nürnberg), GF: I. Totev, A. McDonald, W. Knoblich

  reply	other threads:[~2025-07-28  9:37 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-07-28  8:15 Oscar Salvador
2025-07-28  8:44 ` David Hildenbrand
2025-07-28  9:28   ` Hannes Reinecke
2025-07-28  9:42     ` David Hildenbrand
2025-07-28  8:48 ` Michal Hocko
2025-07-28  8:53   ` David Hildenbrand
2025-07-28  9:04     ` Michal Hocko
2025-07-28  9:10       ` David Hildenbrand
2025-07-28  9:37         ` Hannes Reinecke [this message]
2025-07-28 13:06           ` Michal Hocko
2025-07-28 13:08             ` David Hildenbrand
2025-07-29  7:24               ` Hannes Reinecke
2025-07-29  9:19                 ` Michal Hocko
2025-07-29  9:29                   ` David Hildenbrand
2025-07-29  9:33                   ` Hannes Reinecke
2025-07-29 11:58                     ` Michal Hocko
2025-07-29 13:52                       ` Hannes Reinecke
2025-07-28 15:15           ` David Hildenbrand
2025-07-28 12:17         ` Michal Hocko
2025-07-28 12:27           ` David Hildenbrand
2025-07-28 12:27             ` David Hildenbrand
2025-07-28 13:00               ` Michal Hocko
2025-07-28 13:03                 ` David Hildenbrand
2025-07-28 12:54             ` Michal Hocko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=f859e5c3-7c96-4d97-a447-75070813450c@suse.de \
    --to=hare@suse.de \
    --cc=david@redhat.com \
    --cc=hare@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=mhocko@suse.com \
    --cc=osalvador@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®