From: Robin Murphy <robin.murphy@arm.com>
To: Tomasz Figa <tfiga@chromium.org>
Cc: "open list:IOMMU DRIVERS" <iommu@lists.linux-foundation.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
Joerg Roedel <joro@8bytes.org>
Subject: Re: [PATCH 1/2] iommu/dma: Respect __GFP_DMA and __GFP_DMA32 in incoming GFP flags
Date: Tue, 27 Jun 2017 15:52:55 +0100 [thread overview]
Message-ID: <f902669c-00d9-a311-8554-93e16be3ceb5@arm.com> (raw)
In-Reply-To: <CAAFQd5Bw-+hOsCgQ67yyCK70Vr9gTVyw59YOsTmGwgTDS+pWSg@mail.gmail.com>
On 27/06/17 13:44, Tomasz Figa wrote:
> On Tue, Jun 27, 2017 at 9:26 PM, Robin Murphy <robin.murphy@arm.com> wrote:
>> On 27/06/17 12:17, Tomasz Figa wrote:
>>> On Tue, Jun 27, 2017 at 8:01 PM, Robin Murphy <robin.murphy@arm.com> wrote:
>>>> On 27/06/17 08:28, Tomasz Figa wrote:
>>>>> Current implementation of __iommu_dma_alloc_pages() keeps adding
>>>>> __GFP_HIGHMEM to GFP flags regardless of whether other zone flags are
>>>>> already included in the incoming flags. If __GFP_DMA or __GFP_DMA32 is
>>>>> set at the same time as __GFP_HIGHMEM, the allocation fails due to
>>>>> invalid zone flag combination.
>>>>>
>>>>> Fix this by checking for __GFP_DMA and __GFP_DMA32 in incoming GFP flags
>>>>> and adding __GFP_HIGHMEM only if they are not present.
>>>>
>>>> Wouldn't it make more sense to strip off the ZONE_DMA* related flags,
>>>> since the whole point here is that we don't care where the pages come from?
>>>
>>> I guess for my use case it wouldn't break things, as I strip them in
>>> my DMA mapping implementation right now (+/- one minor detail below).
>>>
>>> However I recall existing IOMMUs that could only use pages from within
>>> the 32-bit address space (e.g. Tegra X1).
>>
>> In general, iommu-dma can't really support IOMMUs which can't reach the
>> entirety of kernel memory - there's no easy way to determine what such a
>> limit is if it exists, nor necessarily enforce it, and either way the
>> streaming API callbacks are pretty much dead in the water.
>
> Right. Especially with various user pointer sources it doesn't sound
> very realistic to enforce that all memory comes from __GFP_DMA(32)
> zone.
>
> On the other hand, support for user pointer is optional in subsystems
> such as V4L2 and drivers for such disabled hardware could opt out.
> Then at least dma_alloc can be made working, giving some level of
> usability, IMHO higher than no IOMMU and contiguous memory allocated
> from CMA.
>
>>
>>> Also the IOMMU I'm working
>>> on is a part of a PCI device and it might actually prefer 32-bit
>>> addressable memory as well (to avoid DAC addressing; I still need to
>>> evaluate this). With this said, maybe it could actually make sense to
>>> leave the choice to the DMA mapping implementation?
>>
>> I think you're right - we're just not in a position to make any decision
>> at this level, so we probably do have to do this for robustness. I would
>> like to fix the longstanding dodgy comment, though, to clarify that
>> "IOMMU can map any pages" is only an assumption, and particularly one
>> which is invalidated by the presence of GFP_DMA flags.
>
> Just to make sure, should I resent with the commit updated? If so,
> what would be your preference on the wording?
Yes please; how about this?
/*
* Unless we have some addressing limitation implied by GFP_DMA flags,
* assume the IOMMU can map all of RAM and we can allocate anywhere.
*/
if (!(gfp & (__GFP_DMA | __GFP_DMA32)))
...
Feel free to reword it if you like, but those are the general lines I
was thinking along.
Robin.
>
> Best regards,
> Tomasz
>
>>
>> Robin.
>>
>>>
>>> Best regards,
>>> Tomasz
>>>
>>>>
>>>> Robin.
>>>>
>>>>> Signed-off-by: Tomasz Figa <tfiga@chromium.org>
>>>>> ---
>>>>> drivers/iommu/dma-iommu.c | 10 ++++++++--
>>>>> 1 file changed, 8 insertions(+), 2 deletions(-)
>>>>>
>>>>> diff --git a/drivers/iommu/dma-iommu.c b/drivers/iommu/dma-iommu.c
>>>>> index 9d1cebe7f6cb..29965a092a69 100644
>>>>> --- a/drivers/iommu/dma-iommu.c
>>>>> +++ b/drivers/iommu/dma-iommu.c
>>>>> @@ -445,8 +445,14 @@ static struct page **__iommu_dma_alloc_pages(unsigned int count,
>>>>> if (!pages)
>>>>> return NULL;
>>>>>
>>>>> - /* IOMMU can map any pages, so himem can also be used here */
>>>>> - gfp |= __GFP_NOWARN | __GFP_HIGHMEM;
>>>>> + /*
>>>>> + * IOMMU can map any pages, so himem can also be used here,
>>>>> + * unless another DMA zone is explicitly requested.
>>>>> + */
>>>>> + if (!(gfp & (__GFP_DMA | __GFP_DMA32)))
>>>>> + gfp |= __GFP_HIGHMEM;
>>>>> +
>>>>> + gfp |= __GFP_NOWARN;
>>>>>
>>>>> while (count) {
>>>>> struct page *page = NULL;
>>>>>
>>>>
>>
prev parent reply other threads:[~2017-06-27 14:53 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-27 7:28 Tomasz Figa
2017-06-27 7:28 ` [PATCH 2/2] iommu/dma: use __GFP_NOWARN only for high-order allocations Tomasz Figa
2017-06-27 11:05 ` Robin Murphy
2017-06-27 11:01 ` [PATCH 1/2] iommu/dma: Respect __GFP_DMA and __GFP_DMA32 in incoming GFP flags Robin Murphy
2017-06-27 11:17 ` Tomasz Figa
2017-06-27 12:26 ` Robin Murphy
2017-06-27 12:44 ` Tomasz Figa
2017-06-27 14:52 ` Robin Murphy [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=f902669c-00d9-a311-8554-93e16be3ceb5@arm.com \
--to=robin.murphy@arm.com \
--cc=iommu@lists.linux-foundation.org \
--cc=joro@8bytes.org \
--cc=linux-kernel@vger.kernel.org \
--cc=tfiga@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®