Re: [PATCH] Revert "clk: qcom: cpu-8996: simplify the cpu_clk_notifier_cb"

[Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>]

On 12/14/25 8:26 PM, Christopher Obbard wrote:
> Hi Konrad,
> 
> On Mon, 8 Dec 2025 at 22:36, Christopher Obbard
> <christopher.obbard@linaro.org> wrote:
>> Apologies for the late response, I was in the process of setting some
>> more msm8096 boards up again in my new workspace to test this
>> properly.
>>
>>
>>> It may be that your board really has a MSM/APQ8x96*SG* which is another
>>> name for the PRO SKU, which happens to have a 2 times wider divider, try
>>>
>>> `cat /sys/bus/soc/devices/soc0/soc_id`
>>
>> I read the soc_id from both of the msm8096 boards I have:
>>
>> Open-Q™ 820 µSOM Development Kit (APQ8096)
>> ```
>> $ cat /sys/bus/soc/devices/soc0/soc_id
>> 291
>> ```
>> (FWIW this board is not in mainline yet; but boots with a DT similar
>> enough to the db820c. I have a patch in my upstream backlog enabling
>> that board; watch this space)
>>
>> DragonBoard™ 820c (APQ8096)
>> ```
>> $ cat /sys/bus/soc/devices/soc0/soc_id
>> 291
>> ```
> 
> Sorry to nag, but are you able to look into this soc_id and see if
> it's the PRO SKU ?

No, it's the "normal" one

Maybe Dmitry would know a little more what's going on

Konrad