From: Hans de Goede <hdegoede@redhat.com>
To: Sanket Goswami <Sanket.Goswami@amd.com>,
Shyam-sundar.S-k@amd.com, mgross@linux.intel.com
Cc: platform-driver-x86@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 1/2] platform/x86: amd-pmc: Store the pci_dev instance inside struct amd_pmc_dev
Date: Thu, 21 Oct 2021 20:18:33 +0200 [thread overview]
Message-ID: <f903b9d5-0477-1618-6596-b6039b56a5af@redhat.com> (raw)
In-Reply-To: <20211021092938.196933-1-Sanket.Goswami@amd.com>
Hi,
On 10/21/21 11:29, Sanket Goswami wrote:
> Store the root port information in amd_pmc_probe() so that the
> information can be used across multiple routines.
>
> Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
> ---
> Changes in v2:
> - Store the rdev info in amd_pmc_probe() as suggested by Hans.
Thank you, but there are still some issues, see below.
> drivers/platform/x86/amd-pmc.c | 4 +++-
> 1 file changed, 3 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/platform/x86/amd-pmc.c b/drivers/platform/x86/amd-pmc.c
> index 55f14bdfdbfd..502f37eaba1f 100644
> --- a/drivers/platform/x86/amd-pmc.c
> +++ b/drivers/platform/x86/amd-pmc.c
> @@ -119,6 +119,7 @@ struct amd_pmc_dev {
> u16 minor;
> u16 rev;
> struct device *dev;
> + struct pci_dev *rdev;
> struct mutex lock; /* generic mutex lock */
> #if IS_ENABLED(CONFIG_DEBUG_FS)
> struct dentry *dbgfs_dir;
> @@ -482,6 +483,7 @@ static int amd_pmc_probe(struct platform_device *pdev)
> return -ENODEV;
> }
>
> + dev->rdev = rdev;
> dev->cpu_id = rdev->device;
> err = pci_write_config_dword(rdev, AMD_PMC_SMU_INDEX_ADDRESS, AMD_PMC_BASE_ADDR_LO);
> if (err) {
> @@ -512,7 +514,6 @@ static int amd_pmc_probe(struct platform_device *pdev)
> }
>
> base_addr_hi = val & AMD_PMC_BASE_ADDR_LO_MASK;
> - pci_dev_put(dev->rdev);
The current code here actually reads:
pci_dev_put(rdev);
Note (rdev) not (dev->rdev). I don't know what you based this on, this is weird.
Also there are a bunch of error-exits from amd_pmc_probe() which not all
need a "pci_dev_put(rdev)" added to them before there "return ERROR;"
statement.
It would be best to add:
err_pci_dev_put:
pci_dev_put(rdev);
return err;
Add the end off the function (after the return 0;) and replace all
"return FOO" error-exits with:
err = <FOO>;
goto err_pci_dev_put;
}
Regards,
Hans
> base_addr = ((u64)base_addr_hi << 32 | base_addr_lo);
>
> dev->regbase = devm_ioremap(dev->dev, base_addr + AMD_PMC_BASE_ADDR_OFFSET,
> @@ -546,6 +547,7 @@ static int amd_pmc_remove(struct platform_device *pdev)
> struct amd_pmc_dev *dev = platform_get_drvdata(pdev);
>
> amd_pmc_dbgfs_unregister(dev);
> + pci_dev_put(dev->rdev);
> mutex_destroy(&dev->lock);
> return 0;
> }
>
next prev parent reply other threads:[~2021-10-21 18:18 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-10-21 9:29 Sanket Goswami
2021-10-21 18:18 ` Hans de Goede [this message]
2021-10-22 6:55 ` Goswami, Sanket
2021-10-22 8:51 ` Hans de Goede
2021-10-22 10:16 ` Goswami, Sanket
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=f903b9d5-0477-1618-6596-b6039b56a5af@redhat.com \
--to=hdegoede@redhat.com \
--cc=Sanket.Goswami@amd.com \
--cc=Shyam-sundar.S-k@amd.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mgross@linux.intel.com \
--cc=platform-driver-x86@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®