Re: [PATCH v2 5/5] usb: ohci-nxp: clean up probe error labels

[Vladimir Zapolskiy <vz@mleia.com>]

On 12/18/25 17:35, Johan Hovold wrote:
> Error labels should be named after what they do rather than after from
> where they are jumped to.
> 
> Rename the probe error labels for consistency and to improve
> readability.
> 
> Signed-off-by: Johan Hovold <johan@kernel.org>
> ---
>   drivers/usb/host/ohci-nxp.c | 16 ++++++++--------
>   1 file changed, 8 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/usb/host/ohci-nxp.c b/drivers/usb/host/ohci-nxp.c
> index 509ca7d8d513..7663f2aa35e9 100644
> --- a/drivers/usb/host/ohci-nxp.c
> +++ b/drivers/usb/host/ohci-nxp.c
> @@ -169,13 +169,13 @@ static int ohci_hcd_nxp_probe(struct platform_device *pdev)
>   
>   	ret = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
>   	if (ret)
> -		goto fail_disable;
> +		goto err_put_client;
>   
>   	dev_dbg(&pdev->dev, "%s: " DRIVER_DESC " (nxp)\n", hcd_name);
>   	if (usb_disabled()) {
>   		dev_err(&pdev->dev, "USB is disabled\n");
>   		ret = -ENODEV;
> -		goto fail_disable;
> +		goto err_put_client;
>   	}
>   
>   	/* Enable USB host clock */
> @@ -183,7 +183,7 @@ static int ohci_hcd_nxp_probe(struct platform_device *pdev)
>   	if (IS_ERR(usb_host_clk)) {
>   		dev_err(&pdev->dev, "failed to acquire and start USB OHCI clock\n");
>   		ret = PTR_ERR(usb_host_clk);
> -		goto fail_disable;
> +		goto err_put_client;
>   	}
>   
>   	isp1301_configure();
> @@ -192,13 +192,13 @@ static int ohci_hcd_nxp_probe(struct platform_device *pdev)
>   	if (!hcd) {
>   		dev_err(&pdev->dev, "Failed to allocate HC buffer\n");
>   		ret = -ENOMEM;
> -		goto fail_disable;
> +		goto err_put_client;
>   	}
>   
>   	hcd->regs = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
>   	if (IS_ERR(hcd->regs)) {
>   		ret = PTR_ERR(hcd->regs);
> -		goto fail_resource;
> +		goto err_put_hcd;
>   	}
>   	hcd->rsrc_start = res->start;
>   	hcd->rsrc_len = resource_size(res);
> @@ -206,7 +206,7 @@ static int ohci_hcd_nxp_probe(struct platform_device *pdev)
>   	irq = platform_get_irq(pdev, 0);
>   	if (irq < 0) {
>   		ret = -ENXIO;
> -		goto fail_resource;
> +		goto err_put_hcd;
>   	}
>   
>   	ohci_nxp_start_hc();
> @@ -220,9 +220,9 @@ static int ohci_hcd_nxp_probe(struct platform_device *pdev)
>   	}
>   
>   	ohci_nxp_stop_hc();
> -fail_resource:
> +err_put_hcd:
>   	usb_put_hcd(hcd);
> -fail_disable:
> +err_put_client:
>   	put_device(&isp1301_i2c_client->dev);
>   	isp1301_i2c_client = NULL;
>   	return ret;

Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>

Thank you for the fixes!

-- 
Best wishes,
Vladimir