Re: [PATCH 1/2] soc: qcom: rpmh-rsc: Update CMD_MSGID_LEN to 4 bytes for read request

[Maulik Shah <maulik.shah@oss.qualcomm.com>]

On 10-09-2026 14:31, Konrad Dybcio wrote:
> On 9/10/26 10:53 AM, Maulik Shah wrote:
>> Newer SoC like hawi with RSC version v4.5 support 4 byte message read
>> request instead of default 8 byte on older SoCs. The write request
>> continues to be 8 bytes.
>>
>> Update the read request message accordingly on RSC v4.5 and higher.
>>
>> Signed-off-by: Maulik Shah <maulik.shah@oss.qualcomm.com>
>> ---
>>  drivers/soc/qcom/rpmh-rsc.c | 13 ++++++++++---
>>  1 file changed, 10 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/soc/qcom/rpmh-rsc.c b/drivers/soc/qcom/rpmh-rsc.c
>> index c4542318eac4..f84a399fa5dc 100644
>> --- a/drivers/soc/qcom/rpmh-rsc.c
>> +++ b/drivers/soc/qcom/rpmh-rsc.c
>> @@ -86,6 +86,7 @@ enum {
>>  #define TCS_AMC_MODE_TRIGGER		BIT(24)
>>  
>>  /* TCS CMD register bit mask */
>> +#define CMD_MSGID_LEN_READ_v4_5		4
>>  #define CMD_MSGID_LEN			8
>>  #define CMD_MSGID_RESP_REQ		BIT(8)
>>  #define CMD_MSGID_WRITE			BIT(16)
>> @@ -499,15 +500,21 @@ static void __tcs_buffer_write(struct rsc_drv *drv, int tcs_id, int cmd_id,
>>  			       const struct tcs_request *msg)
>>  {
>>  	u32 msgid;
>> -	u32 cmd_msgid = CMD_MSGID_LEN;
>> +	u32 cmd_msgid = 0;
>>  	u32 cmd_enable = 0;
>>  	struct tcs_cmd *cmd;
>>  	int i, j;
>>  
>>  	/* Convert all commands to RR when the request has wait_for_compl set */
>>  	cmd_msgid |= msg->wait_for_compl ? CMD_MSGID_RESP_REQ : 0;
>> -	if (!msg->is_read)
>> -		cmd_msgid |= CMD_MSGID_WRITE;
>> +	if (!msg->is_read) {
> checking for the negative first is odd.. it's existing art, but
> let's invert that for readability

Ack. will update in v2.

>
>> +		cmd_msgid = CMD_MSGID_LEN | CMD_MSGID_WRITE;
>> +	} else {
>> +		if (drv->ver.major >= 4 && drv->ver.minor >= 5)
> This check will fail for e.g. v5.0
>
> (major == 4 && minor >= 5) || major >= 5
>
> Konrad

Ack. will update in v2.

Thanks,
Maulik