From: Derek Robson <robsonde@gmail.com>
To: gregkh@linuxfoundation.org, binoy.jayan@linaro.org, robsonde@gmail.com
Cc: devel@driverdev.osuosl.org, linux-kernel@vger.kernel.org
Subject: [PATCH 02/15] Staging: rtl8192u: r819xU_cmdpkt.c - style fix
Date: Thu, 16 Feb 2017 18:31:07 +1300 [thread overview]
Message-ID: <f9d08655dffc4b32cbca92d56ab523643b4ce339.1487222627.git.robsonde@gmail.com> (raw)
In-Reply-To: <cover.1487222627.git.robsonde@gmail.com>
Fixed style of block comments
Found using checkpatch
Signed-off-by: Derek Robson <robsonde@gmail.com>
---
drivers/staging/rtl8192u/r819xU_cmdpkt.c | 82 ++++++++++++++++++++------------
1 file changed, 52 insertions(+), 30 deletions(-)
diff --git a/drivers/staging/rtl8192u/r819xU_cmdpkt.c b/drivers/staging/rtl8192u/r819xU_cmdpkt.c
index 370d97a18dce..3e0731b04619 100644
--- a/drivers/staging/rtl8192u/r819xU_cmdpkt.c
+++ b/drivers/staging/rtl8192u/r819xU_cmdpkt.c
@@ -34,7 +34,8 @@ rt_status SendTxCommandPacket(struct net_device *dev, void *pData, u32 DataLen)
unsigned char *ptr_buf;
/* Get TCB and local buffer from common pool.
- (It is shared by CmdQ, MgntQ, and USB coalesce DataQ) */
+ * (It is shared by CmdQ, MgntQ, and USB coalesce DataQ)
+ */
skb = dev_alloc_skb(USB_HWDESC_HEADER_LEN + DataLen + 4);
if (!skb)
return RT_STATUS_FAILURE;
@@ -76,7 +77,8 @@ rt_status SendTxCommandPacket(struct net_device *dev, void *pData, u32 DataLen)
* When Who Remark
* 05/12/2008 amy Create Version 0 porting from windows code.
*
- *---------------------------------------------------------------------------*/
+ *---------------------------------------------------------------------------
+ */
static void cmpk_count_txstatistic(struct net_device *dev, cmpk_txfb_t *pstx_fb)
{
struct r8192_priv *priv = ieee80211_priv(dev);
@@ -87,8 +89,9 @@ static void cmpk_count_txstatistic(struct net_device *dev, cmpk_txfb_t *pstx_fb)
(pu1Byte)(&rtState));
/* When RF is off, we should not count the packet for hw/sw synchronize
- reason, ie. there may be a duration while sw switch is changed and
- hw switch is being changed. */
+ * reason, ie. there may be a duration while sw switch is changed and
+ * hw switch is being changed.
+ */
if (rtState == eRfOff)
return;
#endif
@@ -98,8 +101,9 @@ static void cmpk_count_txstatistic(struct net_device *dev, cmpk_txfb_t *pstx_fb)
return;
#endif
/* We can not know the packet length and transmit type:
- broadcast or uni or multicast. So the relative statistics
- must be collected in tx feedback info. */
+ * broadcast or uni or multicast. So the relative statistics
+ * must be collected in tx feedback info.
+ */
if (pstx_fb->tok) {
priv->stats.txfeedbackok++;
priv->stats.txoktotal++;
@@ -155,7 +159,8 @@ static void cmpk_count_txstatistic(struct net_device *dev, cmpk_txfb_t *pstx_fb)
* When Who Remark
* 05/08/2008 amy Create Version 0 porting from windows code.
*
- *---------------------------------------------------------------------------*/
+ *---------------------------------------------------------------------------
+ */
static void cmpk_handle_tx_feedback(struct net_device *dev, u8 *pmsg)
{
struct r8192_priv *priv = ieee80211_priv(dev);
@@ -165,8 +170,9 @@ static void cmpk_handle_tx_feedback(struct net_device *dev, u8 *pmsg)
/* 1. Extract TX feedback info from RFD to temp structure buffer. */
/* It seems that FW use big endian(MIPS) and DRV use little endian in
- windows OS. So we have to read the content byte by byte or transfer
- endian type before copy the message copy. */
+ * windows OS. So we have to read the content byte by byte or transfer
+ * endian type before copy the message copy.
+ */
/* Use pointer to transfer structure memory. */
memcpy((u8 *)&rx_tx_fb, pmsg, sizeof(cmpk_txfb_t));
/* 2. Use tx feedback info to count TX statistics. */
@@ -174,7 +180,8 @@ static void cmpk_handle_tx_feedback(struct net_device *dev, u8 *pmsg)
/* Comment previous method for TX statistic function. */
/* Collect info TX feedback packet to fill TCB. */
/* We can not know the packet length and transmit type: broadcast or uni
- or multicast. */
+ * or multicast.
+ */
}
static void cmdpkt_beacontimerinterrupt_819xusb(struct net_device *dev)
@@ -215,7 +222,8 @@ static void cmdpkt_beacontimerinterrupt_819xusb(struct net_device *dev)
* When Who Remark
* 05/12/2008 amy Add this for rtl8192 porting from windows code.
*
- *---------------------------------------------------------------------------*/
+ *---------------------------------------------------------------------------
+ */
static void cmpk_handle_interrupt_status(struct net_device *dev, u8 *pmsg)
{
cmpk_intr_sta_t rx_intr_status; /* */
@@ -225,8 +233,9 @@ static void cmpk_handle_interrupt_status(struct net_device *dev, u8 *pmsg)
/* 1. Extract TX feedback info from RFD to temp structure buffer. */
/* It seems that FW use big endian(MIPS) and DRV use little endian in
- windows OS. So we have to read the content byte by byte or transfer
- endian type before copy the message copy. */
+ * windows OS. So we have to read the content byte by byte or transfer
+ * endian type before copy the message copy.
+ */
rx_intr_status.length = pmsg[1];
if (rx_intr_status.length != (sizeof(cmpk_intr_sta_t) - 2)) {
DMESG("cmpk_Handle_Interrupt_Status: wrong length!\n");
@@ -276,15 +285,17 @@ static void cmpk_handle_interrupt_status(struct net_device *dev, u8 *pmsg)
* When Who Remark
* 05/12/2008 amy Create Version 0 porting from windows code.
*
- *---------------------------------------------------------------------------*/
+ *---------------------------------------------------------------------------
+ */
static void cmpk_handle_query_config_rx(struct net_device *dev, u8 *pmsg)
{
cmpk_query_cfg_t rx_query_cfg;
/* 1. Extract TX feedback info from RFD to temp structure buffer. */
/* It seems that FW use big endian(MIPS) and DRV use little endian in
- windows OS. So we have to read the content byte by byte or transfer
- endian type before copy the message copy. */
+ * windows OS. So we have to read the content byte by byte or transfer
+ * endian type before copy the message copy.
+ */
rx_query_cfg.cfg_action = (pmsg[4] & 0x80000000) >> 31;
rx_query_cfg.cfg_type = (pmsg[4] & 0x60) >> 5;
rx_query_cfg.cfg_size = (pmsg[4] & 0x18) >> 3;
@@ -312,7 +323,8 @@ static void cmpk_handle_query_config_rx(struct net_device *dev, u8 *pmsg)
* When Who Remark
* 05/12/2008 amy Create Version 0 porting from windows code.
*
- *---------------------------------------------------------------------------*/
+ *---------------------------------------------------------------------------
+ */
static void cmpk_count_tx_status(struct net_device *dev,
cmpk_tx_status_t *pstx_status)
{
@@ -326,8 +338,9 @@ static void cmpk_count_tx_status(struct net_device *dev,
(pu1Byte)(&rtState));
/* When RF is off, we should not count the packet for hw/sw synchronize
- reason, ie. there may be a duration while sw switch is changed and
- hw switch is being changed. */
+ * reason, ie. there may be a duration while sw switch is changed and
+ * hw switch is being changed.
+ */
if (rtState == eRfOff)
return;
#endif
@@ -373,7 +386,8 @@ static void cmpk_count_tx_status(struct net_device *dev,
* When Who Remark
* 05/12/2008 amy Create Version 0 porting from windows code.
*
- *---------------------------------------------------------------------------*/
+ *---------------------------------------------------------------------------
+ */
static void cmpk_handle_tx_status(struct net_device *dev, u8 *pmsg)
{
cmpk_tx_status_t rx_tx_sts;
@@ -398,7 +412,8 @@ static void cmpk_handle_tx_status(struct net_device *dev, u8 *pmsg)
* When Who Remark
* 05/12/2008 amy Create Version 0 porting from windows code.
*
- *---------------------------------------------------------------------------*/
+ *---------------------------------------------------------------------------
+ */
static void cmpk_handle_tx_rate_history(struct net_device *dev, u8 *pmsg)
{
cmpk_tx_rahis_t *ptxrate;
@@ -412,8 +427,9 @@ static void cmpk_handle_tx_rate_history(struct net_device *dev, u8 *pmsg)
(pu1Byte)(&rtState));
/* When RF is off, we should not count the packet for hw/sw synchronize
- reason, ie. there may be a duration while sw switch is changed and
- hw switch is being changed. */
+ * reason, ie. there may be a duration while sw switch is changed and
+ * hw switch is being changed.
+ */
if (rtState == eRfOff)
return;
#endif
@@ -421,7 +437,8 @@ static void cmpk_handle_tx_rate_history(struct net_device *dev, u8 *pmsg)
ptemp = (u32 *)pmsg;
/* Do endian transfer to word alignment(16 bits) for windows system.
- You must do different endian transfer for linux and MAC OS */
+ * You must do different endian transfer for linux and MAC OS
+ */
for (i = 0; i < (length/4); i++) {
u16 temp1, temp2;
@@ -468,7 +485,8 @@ static void cmpk_handle_tx_rate_history(struct net_device *dev, u8 *pmsg)
* When Who Remark
* 05/06/2008 amy Create Version 0 porting from windows code.
*
- *---------------------------------------------------------------------------*/
+ *---------------------------------------------------------------------------
+ */
u32 cmpk_message_handle_rx(struct net_device *dev,
struct ieee80211_rx_stats *pstats)
{
@@ -478,7 +496,8 @@ u32 cmpk_message_handle_rx(struct net_device *dev,
u8 *pcmd_buff;
/* 0. Check inpt arguments. If is is a command queue message or
- pointer is null. */
+ * pointer is null.
+ */
if (pstats == NULL)
return 0; /* This is not a command packet. */
@@ -492,10 +511,12 @@ u32 cmpk_message_handle_rx(struct net_device *dev,
element_id = pcmd_buff[0];
/* 4. Check every received command packet content according to different
- element type. Because FW may aggregate RX command packet to
- minimize transmit time between DRV and FW.*/
+ * element type. Because FW may aggregate RX command packet to
+ * minimize transmit time between DRV and FW.
+ */
/* Add a counter to prevent the lock in the loop from being held too
- long */
+ * long
+ */
while (total_length > 0 && exe_cnt++ < 100) {
/* We support aggregation of different cmd in the same packet */
element_id = pcmd_buff[0];
@@ -523,7 +544,8 @@ u32 cmpk_message_handle_rx(struct net_device *dev,
case RX_TX_PER_PKT_FEEDBACK:
/* You must at lease add a switch case element here,
- Otherwise, we will jump to default case. */
+ * Otherwise, we will jump to default case.
+ */
cmd_length = CMPK_RX_TX_FB_SIZE;
break;
--
2.11.1
next prev parent reply other threads:[~2017-02-16 5:31 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-02-16 5:30 [PATCH 00/15] Staging: rtl8192u - fixed block comments Derek Robson
2017-02-16 5:30 ` [PATCH 01/15] Staging: rtl8192u: ieee80211: ieee80211_wx.c - style fix Derek Robson
2017-02-16 18:38 ` Greg KH
2017-02-16 5:31 ` Derek Robson [this message]
2017-02-16 5:31 ` [PATCH 03/15] Staging: rtl8192u: r8192U_dm.c " Derek Robson
2017-02-16 5:31 ` [PATCH 04/15] Staging: rtl8192u: r8192U_core.c " Derek Robson
2017-02-16 5:32 ` [PATCH 05/15] Staging: rtl8192u: r8192U.h " Derek Robson
2017-02-16 5:32 ` [PATCH 06/15] Staging: rtl8192u: ieee80211: rtl819x_TSProc.c " Derek Robson
2017-02-16 5:32 ` [PATCH 07/15] Staging: rtl8192u: ieee80211: ieee80211_softmac.c " Derek Robson
2017-02-16 5:32 ` [PATCH 08/15] Staging: rtl8192u: ieee80211: ieee80211_module.c " Derek Robson
2017-02-16 5:32 ` [PATCH 09/15] Staging: rtl8192u: ieee80211: rtl819x_HTProc.c " Derek Robson
2017-02-16 5:33 ` [PATCH 10/15] Staging: rtl8192u: ieee80211: rtl819x_BAProc.c " Derek Robson
2017-02-16 5:33 ` [PATCH 11/15] Staging: rtl8192u: ieee80211: rtl819x_HT.h " Derek Robson
2017-02-16 18:40 ` Greg KH
2017-02-16 5:33 ` [PATCH 12/15] Staging: rtl8192u: ieee80211: rtl819x_BA.h " Derek Robson
2017-02-16 18:40 ` Greg KH
2017-02-16 5:33 ` [PATCH 13/15] Staging: rtl8192u: ieee80211: ieee80211_tx.c " Derek Robson
2017-02-16 5:34 ` [PATCH 14/15] Staging: rtl8192u: ieee80211: ieee80211_rx.c " Derek Robson
2017-02-16 5:34 ` [PATCH 15/15] Staging: rtl8192u: ieee80211: ieee80211.h " Derek Robson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=f9d08655dffc4b32cbca92d56ab523643b4ce339.1487222627.git.robsonde@gmail.com \
--to=robsonde@gmail.com \
--cc=binoy.jayan@linaro.org \
--cc=devel@driverdev.osuosl.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®