Re: [PATCH] Bluetooth: btusb: Add new HWIDs for MT7925

[Paul Menzel <pmenzel@molgen.mpg.de>]

Dear Jiande,


Am 04.11.24 um 14:19 schrieb Jiande Lu:
> Add below HWIDs for MediaTek MT7925 USB Bluetooth chip.
> VID 0x0489, PID 0xe14f
> VID 0x0489, PID 0xe150
> VID 0x0489, PID 0xe151
> 
> Patch has been tested successfully and controller is recognized
> device pair successfully.
> 
> MT7925 module bring up message as below.
> Bluetooth: Core ver 2.22
> Bluetooth: HCI device and connection manager initialized
> Bluetooth: HCI socket layer initialized
> Bluetooth: L2CAP socket layer initialized
> Bluetooth: SCO socket layer initialized
> Bluetooth: hci0: HW/SW Version: 0x00000000, Build Time: 20240816133202
> Bluetooth: hci0: Device setup in 286558 usecs
> Bluetooth: hci0: HCI Enhanced Setup Synchronous
> Connection command is advertised, but not supported.

No line wrapping needed.

> Bluetooth: hci0: AOSP extensions version v1.00
> Bluetooth: BNEP (Ethernet Emulation) ver 1.3
> Bluetooth: BNEP filters: protocol multicast
> Bluetooth: BNEP socket layer initialized
> Bluetooth: MGMT ver 1.22
> Bluetooth: RFCOMM TTY layer initialized
> Bluetooth: RFCOMM socket layer initialized
> Bluetooth: RFCOMM ver 1.11
> 
> Signed-off-by: Jiande Lu <jiande.lu@mediatek.com>
> ---
>   drivers/bluetooth/btusb.c | 6 ++++++
>   1 file changed, 6 insertions(+)
> 
> diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
> index 6dc5a7e76558..77b8500f8e9b 100644
> --- a/drivers/bluetooth/btusb.c
> +++ b/drivers/bluetooth/btusb.c
> @@ -658,6 +658,12 @@ static const struct usb_device_id quirks_table[] = {
>   						     BTUSB_WIDEBAND_SPEECH },
>   	{ USB_DEVICE(0x0489, 0xe139), .driver_info = BTUSB_MEDIATEK |
>   						     BTUSB_WIDEBAND_SPEECH },
> +	{ USB_DEVICE(0x0489, 0xe14f), .driver_info = BTUSB_MEDIATEK |
> +						     BTUSB_WIDEBAND_SPEECH },
> +	{ USB_DEVICE(0x0489, 0xe150), .driver_info = BTUSB_MEDIATEK |
> +						     BTUSB_WIDEBAND_SPEECH },
> +	{ USB_DEVICE(0x0489, 0xe151), .driver_info = BTUSB_MEDIATEK |
> +						     BTUSB_WIDEBAND_SPEECH },
>   	{ USB_DEVICE(0x13d3, 0x3602), .driver_info = BTUSB_MEDIATEK |
>   						     BTUSB_WIDEBAND_SPEECH },
>   	{ USB_DEVICE(0x13d3, 0x3603), .driver_info = BTUSB_MEDIATEK |

With the small thing fixed:

Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>


Kind regards,

Paul