From: Alexandre Torgue <alexandre.torgue@st.com>
To: Ludovic Barre <ludovic.Barre@st.com>,
Russell King <linux@armlinux.org.uk>,
Rob Herring <robh+dt@kernel.org>,
Linus Walleij <linus.walleij@linaro.org>,
Arnd Bergmann <arnd@arndb.de>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Gerald Baeza <gerald.baeza@st.com>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>
Subject: Re: [PATCH v5 0/7] ARM: stm32: add initial STM32MPU support
Date: Wed, 14 Feb 2018 12:05:41 +0100 [thread overview]
Message-ID: <fa1d8118-6879-a984-4cd9-0e0da98c467b@st.com> (raw)
In-Reply-To: <1516114580-2424-1-git-send-email-ludovic.Barre@st.com>
Hi Arnd,
On 01/16/2018 03:56 PM, Ludovic Barre wrote:
> From: Ludovic Barre <ludovic.barre@st.com>
>
> This patch series extends the existing STM32 microcontrollers (MCUs)
> family to microprocessors (MPUs). The MPU platform (based on
> Arm Cortex-A) is a continuation of the MCU one (based on Arm
> Cortex-M) in that it shares a wide number of hardware blocks.
>
> change v5:
> -fix serial3 aliases by serial0
>
> change v4:
> -Add all available uarts in stm32mp157c
> -Move uart aliases to board files
>
> change v3:
> -Remove bootargs
> -Remove armv7m_restart and Share stm32_compat for mcu/mpu
> -Modify stm32 kconfig with Arnd template
> -Remove patch below (Linus W: Patch applied)
> devicetree: bindings: Document supported STM32 SoC family
> pinctrl: stm32: Add STM32MP157 MPU support
>
> change V2:
> -Add stm32 documentation in this serie to avoid merge conflict
> thread: "https://patchwork.kernel.org/patch/10102573/";
> -Split bindings (stm32.txt) to separate patches.
> -Remove ARCH_STM32_MCU/MPU flags
> -Adopt rst format for Documentation/arm/stm32 files
> -s/STMicrolectronics/STMicroelectronics/g
> > Ludovic Barre (7):
> Documentation: arm: stm32: move to rst format
> ARM: stm32: prepare stm32 family to welcome armv7 architecture
> dt-bindings: stm32: add support of STM32MP157
> ARM: stm32: add initial support for STM32MP157
> ARM: configs: multi_v7: add stm32 support
> ARM: dts: stm32: add stm32mp157c initial support
> ARM: dts: stm32: add initial support of stm32mp157c eval board
>
I will merge stm32 DT patches and mach-stm32 patches in my next pull
requests.
What about Documentation patch and multi-v7 config patch ?
(I could add Documentation patch in my DT pull request)
Regards
Alex
> Documentation/arm/stm32/overview.rst | 34 +++++
> Documentation/arm/stm32/overview.txt | 33 ----
> Documentation/arm/stm32/stm32f429-overview.rst | 26 ++++
> Documentation/arm/stm32/stm32f429-overview.txt | 22 ---
> Documentation/arm/stm32/stm32f746-overview.rst | 33 ++++
> Documentation/arm/stm32/stm32f746-overview.txt | 34 -----
> Documentation/arm/stm32/stm32h743-overview.rst | 34 +++++
> Documentation/arm/stm32/stm32h743-overview.txt | 30 ----
> Documentation/arm/stm32/stm32mp157-overview.rst | 19 +++
> Documentation/devicetree/bindings/arm/stm32.txt | 1 +
> arch/arm/boot/dts/Makefile | 6 +-
> arch/arm/boot/dts/stm32mp157-pinctrl.dtsi | 185 ++++++++++++++++++++++
> arch/arm/boot/dts/stm32mp157c-ed1.dts | 32 ++++
> arch/arm/boot/dts/stm32mp157c-ev1.dts | 21 +++
> arch/arm/boot/dts/stm32mp157c.dtsi | 194 ++++++++++++++++++++++++
> arch/arm/configs/multi_v7_defconfig | 3 +
> arch/arm/mach-stm32/Kconfig | 38 +++--
> arch/arm/mach-stm32/board-dt.c | 5 +-
> 18 files changed, 614 insertions(+), 136 deletions(-)
> create mode 100644 Documentation/arm/stm32/overview.rst
> delete mode 100644 Documentation/arm/stm32/overview.txt
> create mode 100644 Documentation/arm/stm32/stm32f429-overview.rst
> delete mode 100644 Documentation/arm/stm32/stm32f429-overview.txt
> create mode 100644 Documentation/arm/stm32/stm32f746-overview.rst
> delete mode 100644 Documentation/arm/stm32/stm32f746-overview.txt
> create mode 100644 Documentation/arm/stm32/stm32h743-overview.rst
> delete mode 100644 Documentation/arm/stm32/stm32h743-overview.txt
> create mode 100644 Documentation/arm/stm32/stm32mp157-overview.rst
> create mode 100644 arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
> create mode 100644 arch/arm/boot/dts/stm32mp157c-ed1.dts
> create mode 100644 arch/arm/boot/dts/stm32mp157c-ev1.dts
> create mode 100644 arch/arm/boot/dts/stm32mp157c.dtsi
>
next prev parent reply other threads:[~2018-02-14 11:06 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-16 14:56 Ludovic Barre
2018-01-16 14:56 ` [PATCH v5 1/7] Documentation: arm: stm32: move to rst format Ludovic Barre
2018-01-16 14:56 ` [PATCH v5 2/7] ARM: stm32: prepare stm32 family to welcome armv7 architecture Ludovic Barre
2018-01-16 14:56 ` [PATCH v5 3/7] dt-bindings: stm32: add support of STM32MP157 Ludovic Barre
2018-01-16 14:56 ` [PATCH v5 4/7] ARM: stm32: add initial support for STM32MP157 Ludovic Barre
2018-01-16 14:56 ` [PATCH v5 5/7] ARM: configs: multi_v7: add stm32 support Ludovic Barre
2018-01-16 14:56 ` [PATCH v5 6/7] ARM: dts: stm32: add stm32mp157c initial support Ludovic Barre
2018-01-16 14:56 ` [PATCH v5 7/7] ARM: dts: stm32: add initial support of stm32mp157c eval board Ludovic Barre
2018-01-19 14:02 ` [PATCH v5 0/7] ARM: stm32: add initial STM32MPU support Alexandre Torgue
2018-02-14 11:05 ` Alexandre Torgue [this message]
2018-02-14 14:23 ` Arnd Bergmann
2018-02-26 17:00 ` Alexandre Torgue
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=fa1d8118-6879-a984-4cd9-0e0da98c467b@st.com \
--to=alexandre.torgue@st.com \
--cc=arnd@arndb.de \
--cc=devicetree@vger.kernel.org \
--cc=gerald.baeza@st.com \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=ludovic.Barre@st.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®