mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Marek Szyprowski <m.szyprowski@samsung.com>
To: Donggeun Yoo <donggeunyoo.kernel@gmail.com>
Cc: Robin Murphy <robin.murphy@arm.com>,
	Andrew Morton <akpm@linux-foundation.org>,
	iommu@lists.linux.dev, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] dma-coherent: report a failed reserved memory assignment
Date: Wed, 9 Sep 2026 11:29:31 +0200	[thread overview]
Message-ID: <fb39c105-db6c-4820-aee6-e423bf612cc7@samsung.com> (raw)
In-Reply-To: <20260905074727.108029-1-donggeunyoo.kernel@gmail.com>

On 05.09.2026 09:47, Donggeun Yoo wrote:
> rmem_dma_device_init() drops the return value of
> dma_assign_coherent_memory() and always reports success. That call fails
> with -EBUSY when the device already has a coherent pool, and the file
> allows only "*one* such region of memory" per device.
>
> of_reserved_mem_device_init_by_idx() reads the zero as success. It logs
> "assigned reserved memory node" for a region that was not assigned and
> records the pairing, so of_reserved_mem_device_release() later runs
> rmem_dma_device_release() for it. That clears dev->dma_mem without
> looking at which region it was called for, dropping the pool the device
> did get and leaving it on ordinary memory.
>
> dma_declare_coherent_memory() checks the same call and releases the
> memory on failure, and rmem_swiotlb_device_init() propagates its own
> errors. Return the error here as well, so a device tree that assigns two
> pools to one device fails the probe instead of half working.
>
> Fixes: 7bfa5ab6fa1b ("drivers: dma-coherent: add initialization from device tree")
> Signed-off-by: Donggeun Yoo <donggeunyoo.kernel@gmail.com>

Applied to dma-mapping-fixes, thanks!

> ---
> Compile-tested only, with CONFIG_DMA_DECLARE_COHERENT=y and
> CONFIG_OF_RESERVED_MEM=y. I do not have a board that assigns two
> shared-dma-pool regions to one device; the release path was traced
> through of_reserved_mem_device_release() and rmem_dma_device_release()
> rather than observed.
>
>  kernel/dma/coherent.c | 3 +--
>  1 file changed, 1 insertion(+), 2 deletions(-)
>
> diff --git a/kernel/dma/coherent.c b/kernel/dma/coherent.c
> index 45bbae947f4b..4d0266893bcc 100644
> --- a/kernel/dma/coherent.c
> +++ b/kernel/dma/coherent.c
> @@ -352,8 +352,7 @@ static int rmem_dma_device_init(struct reserved_mem *rmem, struct device *dev)
>  	    min_not_zero(dev->coherent_dma_mask, dev->bus_dma_limit))
>  		dev_warn(dev, "reserved memory is beyond device's set DMA address range\n");
>  
> -	dma_assign_coherent_memory(dev, mem);
> -	return 0;
> +	return dma_assign_coherent_memory(dev, mem);
>  }
>  
>  static void rmem_dma_device_release(struct reserved_mem *rmem,

Best regards
-- 
Marek Szyprowski, PhD
Samsung R&D Institute Poland


      reply	other threads:[~2026-09-09  9:29 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <CGME20260905074735eucas1p235b2a9129bc0bb01b5725d57149ed5f5@eucas1p2.samsung.com>
2026-09-05  7:47 ` Donggeun Yoo
2026-09-09  9:29   ` Marek Szyprowski [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=fb39c105-db6c-4820-aee6-e423bf612cc7@samsung.com \
    --to=m.szyprowski@samsung.com \
    --cc=akpm@linux-foundation.org \
    --cc=donggeunyoo.kernel@gmail.com \
    --cc=iommu@lists.linux.dev \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robin.murphy@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®