Re: [PATCH 3/3] arm64: dts: qcom: Add Samsung Galaxy Book2 Go

[Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>]

On 10/12/26 8:11 PM, Luca Weiss wrote:
> From: Jasper Korten <jja2000@gmail.com>

[...]

> Signed-off-by: Jasper Korten <jja2000@gmail.com>
> Co-developed-by: Federico Amedeo Izzo <federico@izzo.pro>
> Signed-off-by: Federico Amedeo Izzo <federico@izzo.pro>
> Co-developed-by: Luca Weiss <luca@lucaweiss.eu>
> Signed-off-by: Luca Weiss <luca@lucaweiss.eu>
> Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>

Good to see the Lucas are in agreement ;)

[...]

> +&pm8350c_gpios {
> +	pmic_lcd_bl_en: pmic-lcd-bl-en-state {
> +		pins = "gpio7";
> +		function = "normal";
> +		bias-disable;
> +		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
> +		output-low;
> +		power-source = <0>;
> +	};
> +
> +	pmic_lcd_bl_pwm: pmic-lcd-bl-pwm-state {
> +		pins = "gpio8";
> +		function = "func1";
> +		bias-disable;
> +		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
> +		output-low;
> +		power-source = <0>;
> +	};

Drop the output-low, the consumers already take care of the state

[...]

> +&uart7 {
> +	/delete-property/interrupts;

Let's add a space after the '/'

> +	interrupts-extended = <&intc GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>,
> +			      <&tlmm 31 IRQ_TYPE_EDGE_FALLING>;
> +
> +	pinctrl-1 = <&qup_uart7_sleep_cts>, <&qup_uart7_sleep_rts>, <&qup_uart7_sleep_tx>, <&qup_uart7_sleep_rx>;

And let's wrap this line

[...]

> +&usb_1 {
> +	dr_mode = "host";

Does OTG not "just work"?

I'm assuming there's no pmic-glink on this device?

Konrad