From: Hans Verkuil <hverkuil+cisco@kernel.org>
To: Deepa Guthyappa Madivalara <deepa.madivalara@oss.qualcomm.com>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
Vikash Garodia <vikash.garodia@oss.qualcomm.com>,
Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>,
Abhinav Kumar <abhinav.kumar@linux.dev>,
Bryan O'Donoghue <bod@kernel.org>
Cc: linux-media@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-msm@vger.kernel.org, kernel test robot <lkp@intel.com>
Subject: Re: [PATCH v2 1/3] media: uapi: Introduce new control for video encoder ROI
Date: Wed, 15 Jul 2026 10:25:34 +0200 [thread overview]
Message-ID: <fb72164e-ae4f-4ee0-9030-bb1d21ee7ce9@kernel.org> (raw)
In-Reply-To: <20260714-enc_roi_enable-v2-1-63683f9dbcef@oss.qualcomm.com>
On 14/07/2026 21:00, Deepa Guthyappa Madivalara wrote:
> Add custom control, V4L2_CID_MPEG_VIDEO_ROI_MB_DELTA_QP for
> video encoder Region of Interest to allow applications to specify
> different quality levels for specific regions in video frames. Define
> V4L2_CID_MPEG_VIDEO_ROI_MB_SIZE to retrieve supported MB size based on
> codec from the hardware encoder and set the corresponding ROI MB delta_qp
> map that adjusts quantization relative to the frame QP's base value.
>
> This enables use cases like prioritizing quality for faces in video
> conferencing or important objects in surveillance footage while reducing
> bitrate for less critical areas.
>
> Signed-off-by: Deepa Guthyappa Madivalara <deepa.madivalara@oss.qualcomm.com>
> ---
> Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst | 14 ++++++++++++++
> .../userspace-api/media/v4l/videodev2.h.rst.exceptions | 1 +
> .../userspace-api/media/v4l/vidioc-g-ext-ctrls.rst | 4 ++++
> Documentation/userspace-api/media/v4l/vidioc-queryctrl.rst | 6 ++++++
> include/media/v4l2-ctrls.h | 1 +
> include/uapi/linux/v4l2-controls.h | 2 ++
> include/uapi/linux/videodev2.h | 3 +++
> 7 files changed, 31 insertions(+)
>
> diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
> index ab865a1a6ba929f1725ce2ab0fd3aeee4a69329a..1995e7335fb29611151c61561df577f2bdac7a48 100644
> --- a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
> +++ b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
> @@ -1674,6 +1674,20 @@ enum v4l2_mpeg_video_h264_hierarchical_coding_type -
> Codecs need to always use the specified range, rather then a HW custom range.
> Applicable to encoders
>
> +``V4L2_CID_MPEG_VIDEO_ROI_MB_DELTA_QP (integer)``
integer -> __s8
> + This custom control is used to set ROI MB map delta_Qp for whole frame.
Why is this a 'custom' control? This looks like a standard control to me.
Or do you perhaps mean that the value is HW dependent?
> + The frame is divided into grid with MB Size returned from querying
The frame is divided into a grid of MB Size by MB Size pixels (MB Size is
obtained from querying ``V4L2_CID_MPEG_VIDEO_ROI_MB_SIZE``).
> + V4L2_CID_MPEG_VIDEO_ROI_MB_SIZE. Each block is configured with delta_Qp
> + in raster order. The valid range for delta_Qp is encoder dependent.
> + Applicable to encoders.
> +
> +``V4L2_CID_MPEG_VIDEO_ROI_MB_SIZE (integer)``
> + This read-only control returns the MB Size for ROI MB delta_Qp map.
> + Its valid range depends on encoder supported codec format.
> + Example: For H.264, 16 is returned for 16x16 MB size.
> + For HEVC, 32 is returned for 32x32 MB size.
> + Depending on the size returned, delta_Qp Map is set to the encoder.
Sorry, it's not clear what you mean with that last sentence.
Is it possible to have codecs with non-square macroblocks? E.g. 32x16?
Regards,
Hans
> +
> .. raw:: latex
>
> \normalsize
> diff --git a/Documentation/userspace-api/media/v4l/videodev2.h.rst.exceptions b/Documentation/userspace-api/media/v4l/videodev2.h.rst.exceptions
> index 6182b4e2d2ee002c0d3562e1cc3bc2fd9c4286d6..b036ed3ec2f0744175cad1cbc4e73fe828e0c955 100644
> --- a/Documentation/userspace-api/media/v4l/videodev2.h.rst.exceptions
> +++ b/Documentation/userspace-api/media/v4l/videodev2.h.rst.exceptions
> @@ -141,6 +141,7 @@ replace symbol V4L2_CTRL_TYPE_STRING :c:type:`V4L.v4l2_ctrl_type`
> replace symbol V4L2_CTRL_TYPE_U16 :c:type:`V4L.v4l2_ctrl_type`
> replace symbol V4L2_CTRL_TYPE_U32 :c:type:`V4L.v4l2_ctrl_type`
> replace symbol V4L2_CTRL_TYPE_U8 :c:type:`V4L.v4l2_ctrl_type`
> +replace symbol V4L2_CTRL_TYPE_S8 :c:type:`V4L.v4l2_ctrl_type`
> replace symbol V4L2_CTRL_TYPE_MPEG2_SEQUENCE :c:type:`V4L.v4l2_ctrl_type`
> replace symbol V4L2_CTRL_TYPE_MPEG2_PICTURE :c:type:`V4L.v4l2_ctrl_type`
> replace symbol V4L2_CTRL_TYPE_MPEG2_QUANTISATION :c:type:`V4L.v4l2_ctrl_type`
> diff --git a/Documentation/userspace-api/media/v4l/vidioc-g-ext-ctrls.rst b/Documentation/userspace-api/media/v4l/vidioc-g-ext-ctrls.rst
> index b8698b85bd808979fc590715125f689880e5a30e..8d5eec357509700c9a582b98c14843bb5e483be0 100644
> --- a/Documentation/userspace-api/media/v4l/vidioc-g-ext-ctrls.rst
> +++ b/Documentation/userspace-api/media/v4l/vidioc-g-ext-ctrls.rst
> @@ -185,6 +185,10 @@ still cause this situation.
> - ``p_u32``
> - A pointer to a matrix control of unsigned 32-bit values. Valid if
> this control is of type ``V4L2_CTRL_TYPE_U32``.
> + * - __s8 *
> + - ``p_s8``
> + - A pointer to a matrix control of signed 8-bit values. Valid if
> + this control is of type ``V4L2_CTRL_TYPE_S8``.
> * - __s32 *
> - ``p_s32``
> - A pointer to a matrix control of signed 32-bit values. Valid if
> diff --git a/Documentation/userspace-api/media/v4l/vidioc-queryctrl.rst b/Documentation/userspace-api/media/v4l/vidioc-queryctrl.rst
> index 82c8b52e771ce9301491b3f752e501a8fe7e2434..57e1652ae72e0324742142446acf32a16b94941c 100644
> --- a/Documentation/userspace-api/media/v4l/vidioc-queryctrl.rst
> +++ b/Documentation/userspace-api/media/v4l/vidioc-queryctrl.rst
> @@ -425,6 +425,12 @@ See also the examples in :ref:`control`.
> - any
> - An unsigned 32-bit valued control ranging from minimum to maximum
> inclusive. The step value indicates the increment between values.
> + * - ``V4L2_CTRL_TYPE_S8``
> + - any
> + - any
> + - any
> + - A signed 8-bit valued control ranging from minimum to maximum
> + inclusive. The step value indicates the increment between values.
> * - ``V4L2_CTRL_TYPE_MPEG2_QUANTISATION``
> - n/a
> - n/a
> diff --git a/include/media/v4l2-ctrls.h b/include/media/v4l2-ctrls.h
> index 327976b14d50b73a631e4d2ed95d9f4d146c45ab..a1806ddbc797efa52e83cd3f685ef70d5b5483d2 100644
> --- a/include/media/v4l2-ctrls.h
> +++ b/include/media/v4l2-ctrls.h
> @@ -64,6 +64,7 @@ union v4l2_ctrl_ptr {
> s32 *p_s32;
> s64 *p_s64;
> u8 *p_u8;
> + s8 *p_s8;
> u16 *p_u16;
> u32 *p_u32;
> char *p_char;
> diff --git a/include/uapi/linux/v4l2-controls.h b/include/uapi/linux/v4l2-controls.h
> index affec0ab4781507be761cb791ff737460acf9cb7..00a2c48630bd198faa9a2b833a9aa346d8357555 100644
> --- a/include/uapi/linux/v4l2-controls.h
> +++ b/include/uapi/linux/v4l2-controls.h
> @@ -920,6 +920,8 @@ enum v4l2_mpeg_video_av1_level {
> };
>
> #define V4L2_CID_MPEG_VIDEO_AVERAGE_QP (V4L2_CID_CODEC_BASE + 657)
> +#define V4L2_CID_MPEG_VIDEO_ROI_MB_DELTA_QP (V4L2_CID_CODEC_BASE + 658)
> +#define V4L2_CID_MPEG_VIDEO_ROI_MB_SIZE (V4L2_CID_CODEC_BASE + 659)
>
> /* MPEG-class control IDs specific to the CX2341x driver as defined by V4L2 */
> #define V4L2_CID_CODEC_CX2341X_BASE (V4L2_CTRL_CLASS_CODEC | 0x1000)
> diff --git a/include/uapi/linux/videodev2.h b/include/uapi/linux/videodev2.h
> index eda4492e40dc14a90a230601d8e23b0e13845d34..1e307781645543960e4b73ba46fdf83279fda4dd 100644
> --- a/include/uapi/linux/videodev2.h
> +++ b/include/uapi/linux/videodev2.h
> @@ -1880,6 +1880,7 @@ struct v4l2_ext_control {
> __s64 value64;
> char __user *string;
> __u8 __user *p_u8;
> + __s8 __user *p_s8;
> __u16 __user *p_u16;
> __u32 __user *p_u32;
> __s32 __user *p_s32;
> @@ -1957,6 +1958,7 @@ enum v4l2_ctrl_type {
> V4L2_CTRL_TYPE_U8 = 0x0100,
> V4L2_CTRL_TYPE_U16 = 0x0101,
> V4L2_CTRL_TYPE_U32 = 0x0102,
> + V4L2_CTRL_TYPE_S8 = 0x0103,
> V4L2_CTRL_TYPE_AREA = 0x0106,
> V4L2_CTRL_TYPE_RECT = 0x0107,
>
> @@ -1993,6 +1995,7 @@ enum v4l2_ctrl_type {
> V4L2_CTRL_TYPE_AV1_TILE_GROUP_ENTRY = 0x281,
> V4L2_CTRL_TYPE_AV1_FRAME = 0x282,
> V4L2_CTRL_TYPE_AV1_FILM_GRAIN = 0x283,
> +
> };
>
> /* Used in the VIDIOC_QUERYCTRL ioctl for querying controls */
>
next prev parent reply other threads:[~2026-07-15 8:25 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-14 19:00 [PATCH v2 0/3] Implement Region of Interest(ROI) support Deepa Guthyappa Madivalara
2026-07-14 19:00 ` [PATCH v2 1/3] media: uapi: Introduce new control for video encoder ROI Deepa Guthyappa Madivalara
2026-07-15 8:25 ` Hans Verkuil [this message]
2026-07-16 22:01 ` Deepa Guthyappa Madivalara
2026-07-14 19:00 ` [PATCH v2 2/3] media: v4l2-core: Add support for video encoder ROI control Deepa Guthyappa Madivalara
2026-07-15 8:32 ` Hans Verkuil
2026-07-16 21:56 ` Deepa Guthyappa Madivalara
2026-07-14 19:00 ` [PATCH v2 3/3] media: iris: Add ROI support framework for iris video encoder Deepa Guthyappa Madivalara
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=fb72164e-ae4f-4ee0-9030-bb1d21ee7ce9@kernel.org \
--to=hverkuil+cisco@kernel.org \
--cc=abhinav.kumar@linux.dev \
--cc=bod@kernel.org \
--cc=deepa.madivalara@oss.qualcomm.com \
--cc=dikshita.agarwal@oss.qualcomm.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=lkp@intel.com \
--cc=mchehab@kernel.org \
--cc=vikash.garodia@oss.qualcomm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox