Re: [PATCH v5 8/8] ARM: dts: Add stmpe-adc DT node to Toradex T30 modules

[Marcel Ziswiler <marcel.ziswiler@toradex.com>]

On Fri, 2018-12-21 at 14:46 +0100, Philippe Schenker wrote:
> From: Philippe Schenker <philippe.schenker@toradex.com>
> 
> Add the stmpe-adc DT node as found on Toradex T30 modules
> 
> Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>

Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>

> ---
> 
> Changes in v5: None
> Changes in v4:
>  - New separate commit to hold T30 devicetree changes
> 
> Changes in v3: None
> Changes in v2: None
> 
>  arch/arm/boot/dts/tegra30-apalis.dtsi  | 22 ++++++++++++++--------
>  arch/arm/boot/dts/tegra30-colibri.dtsi | 22 ++++++++++++++--------
>  2 files changed, 28 insertions(+), 16 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/tegra30-apalis.dtsi
> b/arch/arm/boot/dts/tegra30-apalis.dtsi
> index 7f112f192fe9..850b0d13549a 100644
> --- a/arch/arm/boot/dts/tegra30-apalis.dtsi
> +++ b/arch/arm/boot/dts/tegra30-apalis.dtsi
> @@ -976,11 +976,18 @@
>  			id = <0>;
>  			blocks = <0x5>;
>  			irq-trigger = <0x1>;
> +			/* 3.25 MHz ADC clock speed */
> +			st,adc-freq = <1>;
> +			/* 12-bit ADC */
> +			st,mod-12b = <1>;
> +			/* internal ADC reference */
> +			st,ref-sel = <0>;
> +			/* ADC converstion time: 80 clocks */
> +			st,sample-time = <4>;
> +			/* forbid to use ADC channels 3-0 (touch) */
>  
>  			stmpe_touchscreen {
>  				compatible = "st,stmpe-ts";
> -				/* 3.25 MHz ADC clock speed */
> -				st,adc-freq = <1>;
>  				/* 8 sample average control */
>  				st,ave-ctrl = <3>;
>  				/* 7 length fractional part in z */
> @@ -990,17 +997,16 @@
>  				 * current limit value
>  				 */
>  				st,i-drive = <1>;
> -				/* 12-bit ADC */
> -				st,mod-12b = <1>;
> -				/* internal ADC reference */
> -				st,ref-sel = <0>;
> -				/* ADC converstion time: 80 clocks */
> -				st,sample-time = <4>;
>  				/* 1 ms panel driver settling time */
>  				st,settling = <3>;
>  				/* 5 ms touch detect interrupt delay */
>  				st,touch-det-delay = <5>;
>  			};
> +
> +			stmpe_adc {
> +				compatible = "st,stmpe-adc";
> +				st,norequest-mask = <0x0F>;
> +			};
>  		};
>  
>  		/*
> diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi
> b/arch/arm/boot/dts/tegra30-colibri.dtsi
> index 35af03ca9e90..1f9198bb24ff 100644
> --- a/arch/arm/boot/dts/tegra30-colibri.dtsi
> +++ b/arch/arm/boot/dts/tegra30-colibri.dtsi
> @@ -845,11 +845,18 @@
>  			id = <0>;
>  			blocks = <0x5>;
>  			irq-trigger = <0x1>;
> +			/* 3.25 MHz ADC clock speed */
> +			st,adc-freq = <1>;
> +			/* 12-bit ADC */
> +			st,mod-12b = <1>;
> +			/* internal ADC reference */
> +			st,ref-sel = <0>;
> +			/* ADC converstion time: 80 clocks */
> +			st,sample-time = <4>;
> +			/* forbid to use ADC channels 3-0 (touch) */
>  
>  			stmpe_touchscreen {
>  				compatible = "st,stmpe-ts";
> -				/* 3.25 MHz ADC clock speed */
> -				st,adc-freq = <1>;
>  				/* 8 sample average control */
>  				st,ave-ctrl = <3>;
>  				/* 7 length fractional part in z */
> @@ -859,17 +866,16 @@
>  				 * current limit value
>  				 */
>  				st,i-drive = <1>;
> -				/* 12-bit ADC */
> -				st,mod-12b = <1>;
> -				/* internal ADC reference */
> -				st,ref-sel = <0>;
> -				/* ADC converstion time: 80 clocks */
> -				st,sample-time = <4>;
>  				/* 1 ms panel driver settling time */
>  				st,settling = <3>;
>  				/* 5 ms touch detect interrupt delay */
>  				st,touch-det-delay = <5>;
>  			};
> +
> +			stmpe_adc {
> +				compatible = "st,stmpe-adc";
> +				st,norequest-mask = <0x0F>;
> +			};
>  		};
>  
>  		/*