From: Matti Vaittinen <matti.vaittinen@linux.dev>
To: Matti Vaittinen <mazziesaccount@gmail.com>,
Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Cc: Lee Jones <lee@kernel.org>, Pavel Machek <pavel@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Sebastian Reichel <sre@kernel.org>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>,
Matti Vaittinen <mazziesaccount@gmail.com>,
Linus Walleij <linus.walleij@linaro.org>,
Bartosz Golaszewski <brgl@bgdev.pl>,
Alexandre Belloni <alexandre.belloni@bootlin.com>,
linux-leds@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-pm@vger.kernel.org,
linux-clk@vger.kernel.org, linux-gpio@vger.kernel.org,
linux-rtc@vger.kernel.org, Andreas Kemnade <andreas@kemnade.info>
Subject: [PATCH v6 15/17] power: supply: bd71828: Support wider register addresses
Date: Thu, 27 Nov 2025 13:20:28 +0200 [thread overview]
Message-ID: <fc231dd4070de4417ec8a10de3a05c7abbc3fbb2.1764241265.git.mazziesaccount@gmail.com> (raw)
In-Reply-To: <cover.1764241265.git.mazziesaccount@gmail.com>
[-- Attachment #1: Type: text/plain, Size: 2492 bytes --]
From: Matti Vaittinen <mazziesaccount@gmail.com>
The BD71828 power-supply driver assumes register addresses to be 8-bit.
The new BD72720 will use stacked register maps to hide paging which is
done using secondary I2C slave address. This requires use of 9-bit
register addresses in the power-supply driver (added offset 0x100 to
the 8-bit hardware register addresses).
The cost is slightly used memory consumption as the members in the
struct pwr_regs will be changed from u8 to unsigned int, which means 3
byte increase / member / instance.
This is currently 14 members (expected to possibly be increased when
adding new variants / new functionality which may introduce new
registers, but not expected to grow much) and 2 instances (will be 3
instances when BD72720 gets added).
So, even if the number of registers grew to 50 it'd be 150 bytes /
instance. Assuming we eventually supported 5 variants, it'd be
5 * 150 bytes, which stays very reasonable considering systems we are
dealing with.
As a side note, we can reduce the "wasted space / member / instance" from
3 bytes to 1 byte, by using u16 instead of the unsigned int if needed. I
rather use unsigned int to be initially prepared for devices with 32 bit
registers if there is no need to count bytes.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
---
Revision history:
v2 => :
- No changes
RFCv1 => v2:
- New patch
---
drivers/power/supply/bd71828-power.c | 26 +++++++++++++-------------
1 file changed, 13 insertions(+), 13 deletions(-)
diff --git a/drivers/power/supply/bd71828-power.c b/drivers/power/supply/bd71828-power.c
index f667baedeb77..ce73c0f48397 100644
--- a/drivers/power/supply/bd71828-power.c
+++ b/drivers/power/supply/bd71828-power.c
@@ -44,19 +44,19 @@
#define VBAT_LOW_TH 0x00D4
struct pwr_regs {
- u8 vbat_avg;
- u8 ibat;
- u8 ibat_avg;
- u8 btemp_vth;
- u8 chg_state;
- u8 bat_temp;
- u8 dcin_stat;
- u8 dcin_collapse_limit;
- u8 chg_set1;
- u8 chg_en;
- u8 vbat_alm_limit_u;
- u8 conf;
- u8 vdcin;
+ unsigned int vbat_avg;
+ unsigned int ibat;
+ unsigned int ibat_avg;
+ unsigned int btemp_vth;
+ unsigned int chg_state;
+ unsigned int bat_temp;
+ unsigned int dcin_stat;
+ unsigned int dcin_collapse_limit;
+ unsigned int chg_set1;
+ unsigned int chg_en;
+ unsigned int vbat_alm_limit_u;
+ unsigned int conf;
+ unsigned int vdcin;
};
static const struct pwr_regs pwr_regs_bd71828 = {
--
2.52.0
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
next prev parent reply other threads:[~2025-11-27 11:20 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-11-27 11:16 [PATCH v6 00/17] Support ROHM BD72720 PMIC Matti Vaittinen
2025-11-27 11:16 ` [PATCH v6 01/17] dt-bindings: regulator: ROHM BD72720 Matti Vaittinen
2025-11-27 13:00 ` Rob Herring (Arm)
2025-11-27 11:17 ` [PATCH v6 02/17] dt-bindings: battery: Clarify trickle-charge Matti Vaittinen
2025-11-27 11:17 ` [PATCH v6 03/17] dt-bindings: battery: Add trickle-charge upper limit Matti Vaittinen
2025-11-27 11:17 ` [PATCH v6 04/17] dt-bindings: battery: Voltage drop properties Matti Vaittinen
2025-12-01 13:21 ` Linus Walleij
2025-11-27 11:18 ` [PATCH v6 05/17] dt-bindings: mfd: ROHM BD72720 Matti Vaittinen
2025-11-27 11:18 ` [PATCH v6 06/17] dt-bindings: leds: bd72720: Add BD72720 Matti Vaittinen
2025-11-27 11:18 ` [PATCH v6 07/17] mfd: rohm-bd71828: Use regmap_reg_range() Matti Vaittinen
2025-11-27 11:18 ` [PATCH v6 08/17] mfd: rohm-bd71828: Use standard file header format Matti Vaittinen
2025-11-27 11:19 ` [PATCH v6 09/17] mfd: rohm-bd71828: Support ROHM BD72720 Matti Vaittinen
2025-11-27 11:19 ` [PATCH v6 10/17] regulator: bd71828: rename IC specific entities Matti Vaittinen
2025-11-27 11:19 ` [PATCH v6 11/17] regulator: bd71828: Support ROHM BD72720 Matti Vaittinen
2025-11-27 11:19 ` [PATCH v6 12/17] gpio: Support ROHM BD72720 gpios Matti Vaittinen
2025-11-27 11:20 ` [PATCH v6 13/17] clk: clk-bd718x7: Support BD72720 clk gate Matti Vaittinen
2025-11-27 11:20 ` [PATCH v6 14/17] rtc: bd70528: Support BD72720 rtc Matti Vaittinen
2025-11-27 11:20 ` Matti Vaittinen [this message]
2025-11-27 11:20 ` [PATCH v6 16/17] power: supply: bd71828-power: Support ROHM BD72720 Matti Vaittinen
2025-11-27 11:20 ` [PATCH v6 17/17] MAINTAINERS: Add ROHM BD72720 PMIC Matti Vaittinen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=fc231dd4070de4417ec8a10de3a05c7abbc3fbb2.1764241265.git.mazziesaccount@gmail.com \
--to=matti.vaittinen@linux.dev \
--cc=alexandre.belloni@bootlin.com \
--cc=andreas@kemnade.info \
--cc=brgl@bgdev.pl \
--cc=broonie@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=lee@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linus.walleij@linaro.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-leds@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-rtc@vger.kernel.org \
--cc=matti.vaittinen@fi.rohmeurope.com \
--cc=mazziesaccount@gmail.com \
--cc=mturquette@baylibre.com \
--cc=pavel@kernel.org \
--cc=robh@kernel.org \
--cc=sboyd@kernel.org \
--cc=sre@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®