From: Luca Stefani <luca.stefani.ge1@gmail.com>
To: dsterba@suse.cz
Cc: Chris Mason <clm@fb.com>, Josef Bacik <josef@toxicpanda.com>,
David Sterba <dsterba@suse.com>,
linux-btrfs@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v5 2/2] btrfs: Don't block system suspend during fstrim
Date: Tue, 17 Sep 2024 19:38:10 +0200 [thread overview]
Message-ID: <fc2adaec-adaa-4b96-a558-17a968a10f7c@gmail.com> (raw)
In-Reply-To: <20240917162431.GC2920@twin.jikos.cz>
On 17/09/24 18:24, David Sterba wrote:
> On Mon, Sep 16, 2024 at 02:56:15PM +0200, Luca Stefani wrote:
>> Sometimes the system isn't able to suspend because the task
>> responsible for trimming the device isn't able to finish in
>> time, especially since we have a free extent discarding phase,
>> which can trim a lot of unallocated space, and there is no
>> limits on the trim size (unlike the block group part).
>>
>> Since discard isn't a critical call it can be interrupted
>> at any time, in such cases we stop the trim, report the amount
>> of discarded bytes and return failure.
>>
>> Link: https://bugzilla.kernel.org/show_bug.cgi?id=219180
>> Link: https://bugzilla.suse.com/show_bug.cgi?id=1229737
>> Signed-off-by: Luca Stefani <luca.stefani.ge1@gmail.com>
>
> I went through the cancellation points, some of them don't seem to be
> necessary, eg. in a big loop when some function is called to do trim
> (extents, bitmaps) and then again does the signal and freezing check.
>
> Next, some of the functions are called from async discard and errors are
> not checked: btrfs_trim_block_group_bitmaps() called from
> btrfs_discard_workfn().
Both btrfs_trim_block_group_bitmaps and btrfs_trim_block_group_extents
ret codes are never checked indeed in btrfs_discard_workfn. I'll fix
that up in another CL.
>
> Ther's also check for signals pending in trim_bitmaps() in
> free-space-cache.c. Given that the space cache code is on the way out we
> don't necesssarily need to fix it but if the patch gets backported to
> older kernels it still makes sense.
Ah I missed this one, will fix it.
There's a few more instances of fatal_signal_pending but I don't know if
they should be translated or not, will focus on the one you mentioned
and trim_no_bitmap which seems to do similar checks for fatal signals.
>
>> ---
>> fs/btrfs/extent-tree.c | 23 ++++++++++++++++++++++-
>> 1 file changed, 22 insertions(+), 1 deletion(-)
>>
>> diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c
>> index 79b9243c9cd6..cef368a30731 100644
>> --- a/fs/btrfs/extent-tree.c
>> +++ b/fs/btrfs/extent-tree.c
>> @@ -16,6 +16,7 @@
>> #include <linux/percpu_counter.h>
>> #include <linux/lockdep.h>
>> #include <linux/crc32c.h>
>> +#include <linux/freezer.h>
>> #include "ctree.h"
>> #include "extent-tree.h"
>> #include "transaction.h"
>> @@ -1235,6 +1236,11 @@ static int remove_extent_backref(struct btrfs_trans_handle *trans,
>> return ret;
>> }
>>
>> +static bool btrfs_trim_interrupted(void)
>> +{
>> + return fatal_signal_pending(current) || freezing(current);
>> +}
>> +
>> static int btrfs_issue_discard(struct block_device *bdev, u64 start, u64 len,
>> u64 *discarded_bytes)
>> {
>> @@ -1316,6 +1322,11 @@ static int btrfs_issue_discard(struct block_device *bdev, u64 start, u64 len,
>> start += bytes_to_discard;
>> bytes_left -= bytes_to_discard;
>> *discarded_bytes += bytes_to_discard;
>> +
>> + if (btrfs_trim_interrupted()) {
>> + ret = -ERESTARTSYS;
>> + break;
>> + }
>> }
>>
>> return ret;
>> @@ -6470,7 +6481,7 @@ static int btrfs_trim_free_extents(struct btrfs_device *device, u64 *trimmed)
>> start += len;
>> *trimmed += bytes;
>>
>> - if (fatal_signal_pending(current)) {
>> + if (btrfs_trim_interrupted()) {
>> ret = -ERESTARTSYS;
>> break;
>> }
>> @@ -6519,6 +6530,11 @@ int btrfs_trim_fs(struct btrfs_fs_info *fs_info, struct fstrim_range *range)
>>
>> cache = btrfs_lookup_first_block_group(fs_info, range->start);
>> for (; cache; cache = btrfs_next_block_group(cache)) {
>> + if (btrfs_trim_interrupted()) {
>> + bg_ret = -ERESTARTSYS;
>> + break;
>> + }
>> +
>> if (cache->start >= range_end) {
>> btrfs_put_block_group(cache);
>> break;
>> @@ -6558,6 +6574,11 @@ int btrfs_trim_fs(struct btrfs_fs_info *fs_info, struct fstrim_range *range)
>>
>> mutex_lock(&fs_devices->device_list_mutex);
>> list_for_each_entry(device, &fs_devices->devices, dev_list) {
>> + if (btrfs_trim_interrupted()) {
>> + dev_ret = -ERESTARTSYS;
>
> This one seems redundant.
>
>> + break;
>> + }
>> +
>> if (test_bit(BTRFS_DEV_STATE_MISSING, &device->dev_state))
>> continue;
>>
>> --
>> 2.46.0
>>
prev parent reply other threads:[~2024-09-17 17:38 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-09-16 12:56 [PATCH v5 0/2] " Luca Stefani
2024-09-16 12:56 ` [PATCH v5 1/2] btrfs: Split remaining space to discard in chunks Luca Stefani
2024-09-17 16:25 ` David Sterba
2024-09-16 12:56 ` [PATCH v5 2/2] btrfs: Don't block system suspend during fstrim Luca Stefani
2024-09-17 16:24 ` David Sterba
2024-09-17 17:38 ` Luca Stefani [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=fc2adaec-adaa-4b96-a558-17a968a10f7c@gmail.com \
--to=luca.stefani.ge1@gmail.com \
--cc=clm@fb.com \
--cc=dsterba@suse.com \
--cc=dsterba@suse.cz \
--cc=josef@toxicpanda.com \
--cc=linux-btrfs@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®