From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932086Ab3BWWGF (ORCPT ); Sat, 23 Feb 2013 17:06:05 -0500 Received: from mail-yh0-f63.google.com ([209.85.213.63]:64460 "EHLO mail-yh0-f63.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1758530Ab3BWWGE (ORCPT ); Sat, 23 Feb 2013 17:06:04 -0500 X-Greylist: delayed 21171 seconds by postgrey-1.27 at vger.kernel.org; Sat, 23 Feb 2013 17:06:03 EST Path: glegroupsg2000goo.googlegroups.com!not-for-mail Newsgroups: fa.linux.kernel Date: Sat, 23 Feb 2013 08:04:32 -0800 (PST) In-Reply-To: Complaints-To: groups-abuse@google.com Injection-Info: glegroupsg2000goo.googlegroups.com; posting-host=122.172.37.61; posting-account=FuBAQAoAAABC0o4Fb-iG4DiIfKW1QicU NNTP-Posting-Host: 122.172.37.61 References: User-Agent: G2/1.0 X-Google-Web-Client: true X-Google-IP: 122.172.37.61 MIME-Version: 1.0 Message-ID: Subject: Re: at91: SAM9G45 doesn't seem to register HDMAC controller anymore From: hitheshn@gmail.com To: fa.linux.kernel@googlegroups.com Cc: Nicolas Ferre , linux-kernel@vger.kernel.org, Ludovic Desroches Content-Type: text/plain; charset=ISO-8859-1 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Guys, Help! I have a similar problem. SAM9G45 board doesn't seem to load the kernel. When I see the boot log, it uncompresses the kernel and then just sits there. Out of 10 boards, I see this behavior in 2 boards. I tried replacing the DDR RAM first and the CPU itself. But I don't see any change. Can you guys help. Boot log below - -- pico-SAM9G45 Bootstrap 3.0 -- -- AT91SAM9G45-EK -- Compiled: Jan 27 2011 09:45:18 -- -I- RTC Config: rcen: 1 osc32en: 0 osc32byp: 0 oscsel: 0 -I- RTC Config: rcen: 0 osc32en: 1 osc32byp: 0 oscsel: 1 -I- Setting: MCK = 133MHz -I- Init DDRAM -I- Init second bank SDRAM -I- Loading to 0x70000000 -I- MEDSdcard init -I- DMAD_Initialize channel 0 -I- Card Type 2, CSD_STRUCTURE 1 -I- SD/MMC TRANS SPEED 25000 KBit/s -I- SD 4-BITS BUS -I- CMD6(2) arg 0x80FFFF01 -I- SD HS Enable -I- SD/MMC TRANS SPEED 50000 KBit/s -I- SD/MMC card initialization successful -I- Card size: 3781 MB -I- Copy "linux.bin" from SdCard to 0x70000000 -E- File size 2584408 <-> Max allowed size 32 -I- Loading to 0x70107fd0 with size 0x00376f58 -I- MEDSdcard init -I- DMAD_Initialize channel 0 -I- Card Type 2, CSD_STRUCTURE 1 -I- SD/MMC TRANS SPEED 25000 KBit/s -I- SD 4-BITS BUS -I- CMD6(2) arg 0x80FFFF01 -I- SD HS Enable -I- SD/MMC TRANS SPEED 50000 KBit/s -I- SD/MMC card initialization successful -I- Card size: 3781 MB -I- Copy "linux.bin" from SdCard to 0x70107fd0 -I- Modified jump to 0x70108010 The board just hangs here. Thanks -Hithesh