Re: [PATCH 2/2] remoteproc: qcom_q6v5_pas: Add remoteproc support for SOCCP on Nord

[Anurag Pateriya <anurag.pateriya@oss.qualcomm.com>]

On 10/13/2026 3:33 PM, Konrad Dybcio wrote:
> On 10/13/26 11:58 AM, Anurag Pateriya wrote:
>> On 10/13/2026 2:27 PM, Konrad Dybcio wrote:
>>> On 10/9/26 9:35 AM, Anurag Pateriya wrote:
>>>> The SoC Control Processor (SoCCP) is small RISC-V MCU that controls
>>>> USB Type-C, battery charging and various other functions on Qualcomm SoCs.
> 
> [...]
> 
>>>>    +static const struct qcom_pas_data nord_soccp_resource = {
>>>> +    .crash_reason_smem = 656,
>>>> +    .firmware_name = "soccp.mbn",
>>>> +    .pas_id = 51,
>>>> +    .proxy_pd_names = (char*[]){
>>>> +        "cx",
>>>> +        "mx",
>>>> +        NULL
>>>> +    },
>>>> +    .ssr_name = "soccp",
>>>> +    .sysmon_name = "soccp",
>>>> +    .auto_boot = true,
>>>
>>> No DTB?
>>>
>>> Konrad
>>
>> The base patch isn't merged yet for nord-ride-embedded.dts.
>> we need to enable for both rrd and ride-embedded boards.
>> I was planning to send them together once nord-ride-embedded.dts is merged.
> 
> This is not my question. Remoteprocs on recent SoCs come with split
> firmware - MBN for the main part and a separate DTB binary containing
> configuration data.
> 
> Konrad

Ok , I got your question now.

For Nord, SoCCP DTB file ships firmware without a separate SoCCP 
device-tree image. 	


Thanks,
Anurag