Re: [PATCH 3/3] ata: libata-scsi: generate SAT sense data for ATA PASS-THROUGH(32)

[Damien Le Moal <dlemoal@kernel.org>]

On 11/4/26 23:11, shao.mingyin@zte.com.cn wrote:
> From: Shao Mingyin <shao.mingyin@zte.com.cn>
> 
> ata_scsi_qc_complete() detects ATA pass-through commands by the ATA_12
> and ATA_16 opcodes only.  ATA PASS-THROUGH (32) uses the variable
> length CDB opcode 7Fh with service action ATA_32, so for those commands
> the function takes the ordinary completion path: the CK_COND bit is
> never honored and the ATA Status Return sense descriptor is never
> built.  A successful command with CK_COND set is reported as GOOD
> instead of CHECK CONDITION, and a failed command gets the generic ATA
> sense data without the ATA register values.
> 
> The byte that carries T_LENGTH and CK_COND is byte 2 for 12- and
> 16-byte CDBs, but byte 11 for a 32-byte CDB, whose byte 2 is part of the
> variable length CDB header.  Detect ATA PASS-THROUGH (32) through its
> service action and read CK_COND from the correct byte.
> 
> Fixes: b1ffbf854e08 ("libata: Support for an ATA PASS-THROUGH(32) command.")
> Cc: stable@vger.kernel.org
> Signed-off-by: Shao Mingyin <shao.mingyin@zte.com.cn>

Looks OK.

Reviewed-by: Damien Le Moal <dlemoal@kernel.org>

-- 
Damien Le Moal
Western Digital Research