Re: [PATCH v3 00/11] add thermal throttling to Allwinner A33 SoC

[Quentin Schulz <quentin.schulz@free-electrons.com>]

Hi Lee,

On 04/04/2017 10:31, Lee Jones wrote:
> On Tue, 21 Mar 2017, Quentin Schulz wrote:
> 
>> The Allwinner SoCs all have an ADC that can also act as a touchscreen
>> controller and a thermal sensor. The first four channels can be used
>> either for the ADC or the touchscreen and the fifth channel is used for
>> the thermal sensor. We currently have a driver for the two latter
>> functions in drivers/input/touchscreen/sun4i-ts.c but we don't have
>> access to the ADC feature at all. It is meant to replace the current
>> driver by using MFD and subdrivers for existing bindings.
>>
>> The Allwinner A33 only has a thermal sensor present in the GPADC. In
>> addition, there is not an existing DT binding for the GPADC. Thus, we do
>> not need the sun4i-gpadc MFD driver which was made to keep DT compatibility
>> and probe subdrivers without the need to add DT subnodes.
>>
>> This series of patch adds the thermal sensor for the A33 and GPU/CPU
>> thermal throttling. It also adds the cpu-supply property to the CPU node
>> needed by the Sinlinx SinA33 and Olinuxino A33 to adapt their CPU regulator
>> voltage depending on the currently used OPP. The other A33 boards all have
>> their cpu-supply property set.
>>
>> This series also fixes the missing operating-points-v2 property in cpu DT
>> nodes. Finally, it also adds all remaining OPPs which can be found in
>> Allwinner 3.4 linux and fex files of all A33 boards.
>>
>> This series of patch is based on this[1] series of patch.
>>
>> v3:
>>   - fixed compatible name in DT and in documentation,
>>   - fixed DT node name and label,
>>   - added explanations in commit logs,
>>   - moved frequencies that need overvolting to board DTS instead of A33 DTSI,
>>   - fixed a typo in if is_enabled condition,
>>   - removed all patches concerning Olimex Olinuxino (no HW to test on),
> 
> What is the plan for this series?
> 
> I'm guessing there are no hard dependencies on the ARM parts?
> 
> If not, I'm happy to take the changes to 'drivers/*'.
> 

I've sent a v4 to add some Acked-by and change a few commit "titles".
It's ready to be merged with only the following patch required (which
Jonathan asked if you could merge it through the mfd tree): "[RESEND
PATCH v4] iio: adc: add support for X-Powers AXP20X and AXP22X PMICs
ADCs" (https://patchwork.kernel.org/patch/9660879/)

Thanks,
Quentin

>> [1] https://lkml.org/lkml/2016/12/13/298 : "[PATCH v9] add support for Allwinner
>> SoCs ADC"
>>
>> Thanks,
>> Quentin
>>
>> Maxime Ripard (1):
>>   ARM: sun8i: a33: Add devfreq-based GPU cooling
>>
>> Quentin Schulz (10):
>>   ARM: sun8i: a33: add operating-points-v2 property to all nodes
>>   ARM: sun8i: a33: add all operating points
>>   ARM: dts: sun8i: sina33: add cpu-supply
>>   Documentation: DT: bindings: mfd: add A33 GPADC binding
>>   Documentation: DT: bindings: input: touschcreen: remove sun4i
>>     documentation
>>   iio: adc: sun4i-gpadc-iio: move code used in MFD probing to new
>>     function
>>   iio: adc: sun4i-gpadc-iio: add support for A33 thermal sensor
>>   ARM: dtsi: sun8i: a33: add thermal sensor
>>   ARM: dtsi: sun8i: a33: add CPU thermal throttling
>>   ARM: sun8i: sina33: add highest OPP of CPUs
>>
>>  .../touchscreen/sun4i.txt => mfd/sun4i-gpadc.txt}  |  21 +++
>>  arch/arm/boot/dts/sun8i-a23-a33.dtsi               |   1 +
>>  arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts     |  18 +++
>>  arch/arm/boot/dts/sun8i-a33.dtsi                   | 141 +++++++++++++++++
>>  drivers/iio/adc/Kconfig                            |   2 +-
>>  drivers/iio/adc/sun4i-gpadc-iio.c                  | 170 +++++++++++++++++----
>>  include/linux/mfd/sun4i-gpadc.h                    |   4 +
>>  7 files changed, 324 insertions(+), 33 deletions(-)
>>  rename Documentation/devicetree/bindings/{input/touchscreen/sun4i.txt => mfd/sun4i-gpadc.txt} (64%)
>>
> 

-- 
Quentin Schulz, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com