RE: [PATCH net-next v3 1/2] net/ncsi: Add NCSI Broadcom OEM command

[<Justin.Lee1@Dell.com>]

Hi Vijay,

Please order all local variable declarations from longest to shortest
line as instructed by Dave.

Thanks,
Justin


> This patch adds OEM Broadcom commands and response handling. It also
> defines OEM Get MAC Address handler to get and configure the device.
> 
> ncsi_oem_gma_handler_bcm: This handler send NCSI broadcom command for
> getting mac address.
> ncsi_rsp_handler_oem_bcm: This handles response received for all
> broadcom OEM commands.
> ncsi_rsp_handler_oem_bcm_gma: This handles get mac address response and
> set it to device.
> 
> Signed-off-by: Vijay Khemka <vijaykhemka@fb.com>
> ---
>  net/ncsi/Kconfig       |  6 ++++
>  net/ncsi/internal.h    |  8 +++++
>  net/ncsi/ncsi-manage.c | 70 ++++++++++++++++++++++++++++++++++++++++++
>  net/ncsi/ncsi-pkt.h    |  8 +++++
>  net/ncsi/ncsi-rsp.c    | 40 +++++++++++++++++++++++-
>  5 files changed, 131 insertions(+), 1 deletion(-)
> 
> diff --git a/net/ncsi/Kconfig b/net/ncsi/Kconfig
> index 08a8a6031fd7..7f2b46108a24 100644
> --- a/net/ncsi/Kconfig
> +++ b/net/ncsi/Kconfig
> @@ -10,3 +10,9 @@ config NET_NCSI
>  	  support. Enable this only if your system connects to a network
>  	  device via NCSI and the ethernet driver you're using supports
>  	  the protocol explicitly.
> +config NCSI_OEM_CMD_GET_MAC
> +	bool "Get NCSI OEM MAC Address"
> +	depends on NET_NCSI
> +	---help---
> +	  This allows to get MAC address from NCSI firmware and set them back to
> +		controller.
> diff --git a/net/ncsi/internal.h b/net/ncsi/internal.h
> index 3d0a33b874f5..45883b32790e 100644
> --- a/net/ncsi/internal.h
> +++ b/net/ncsi/internal.h
> @@ -71,6 +71,13 @@ enum {
>  /* OEM Vendor Manufacture ID */
>  #define NCSI_OEM_MFR_MLX_ID             0x8119
>  #define NCSI_OEM_MFR_BCM_ID             0x113d
> +/* Broadcom specific OEM Command */
> +#define NCSI_OEM_BCM_CMD_GMA            0x01   /* CMD ID for Get MAC */
> +/* OEM Command payload lengths*/
> +#define NCSI_OEM_BCM_CMD_GMA_LEN        12
> +/* Mac address offset in OEM response */
> +#define BCM_MAC_ADDR_OFFSET             28
> +
>  
>  struct ncsi_channel_version {
>  	u32 version;		/* Supported BCD encoded NCSI version */
> @@ -240,6 +247,7 @@ enum {
>  	ncsi_dev_state_probe_dp,
>  	ncsi_dev_state_config_sp	= 0x0301,
>  	ncsi_dev_state_config_cis,
> +	ncsi_dev_state_config_oem_gma,
>  	ncsi_dev_state_config_clear_vids,
>  	ncsi_dev_state_config_svf,
>  	ncsi_dev_state_config_ev,
> diff --git a/net/ncsi/ncsi-manage.c b/net/ncsi/ncsi-manage.c
> index 091284760d21..75504ccd1b95 100644
> --- a/net/ncsi/ncsi-manage.c
> +++ b/net/ncsi/ncsi-manage.c
> @@ -635,6 +635,39 @@ static int set_one_vid(struct ncsi_dev_priv *ndp, struct ncsi_channel *nc,
>  	return 0;
>  }
>  
> +#if IS_ENABLED(CONFIG_NCSI_OEM_CMD_GET_MAC)
> +
> +/* NCSI OEM Command APIs */
> +static void ncsi_oem_gma_handler_bcm(struct ncsi_cmd_arg *nca)
> +{
> +	int ret = 0;
> +	unsigned char data[NCSI_OEM_BCM_CMD_GMA_LEN];
> +
> +	nca->payload = NCSI_OEM_BCM_CMD_GMA_LEN;
> +
> +	memset(data, 0, NCSI_OEM_BCM_CMD_GMA_LEN);
> +	*(unsigned int *)data = ntohl(NCSI_OEM_MFR_BCM_ID);
> +	data[5] = NCSI_OEM_BCM_CMD_GMA;
> +
> +	nca->data = data;
> +
> +	ret = ncsi_xmit_cmd(nca);
> +	if (ret)
> +		netdev_err(nca->ndp->ndev.dev,
> +			   "NCSI: Failed to transmit cmd 0x%x during configure\n",
> +			   nca->type);
> +}
> +
> +/* OEM Command handlers initialization */
> +static struct ncsi_oem_gma_handler {
> +	unsigned int	mfr_id;
> +	void		(*handler)(struct ncsi_cmd_arg *nca);
> +} ncsi_oem_gma_handlers[] = {
> +	{ NCSI_OEM_MFR_BCM_ID, ncsi_oem_gma_handler_bcm }
> +};
> +
> +#endif /* CONFIG_NCSI_OEM_CMD_GET_MAC */
> +
>  static void ncsi_configure_channel(struct ncsi_dev_priv *ndp)
>  {
>  	struct ncsi_dev *nd = &ndp->ndev;
> @@ -685,6 +718,43 @@ static void ncsi_configure_channel(struct ncsi_dev_priv *ndp)
>  			goto error;
>  		}
>  
> +#if IS_ENABLED(CONFIG_NCSI_OEM_CMD_GET_MAC)
> +		nd->state = ncsi_dev_state_config_oem_gma;
> +		break;
> +	case ncsi_dev_state_config_oem_gma:
> +		nca.type = NCSI_PKT_CMD_OEM;
> +		nca.package = np->id;
> +		nca.channel = nc->id;
> +		ndp->pending_req_num = 1;
> +
> +		/* Check for manufacturer id and Find the handler */
> +		struct ncsi_oem_gma_handler *nch = NULL;
> +		int i;
> +
> +		for (i = 0; i < ARRAY_SIZE(ncsi_oem_gma_handlers); i++) {
> +			if (ncsi_oem_gma_handlers[i].mfr_id ==
> +					nc->version.mf_id) {
> +				if (ncsi_oem_gma_handlers[i].handler)
> +					nch = &ncsi_oem_gma_handlers[i];
> +				else
> +					nch = NULL;
> +
> +				break;
> +			}
> +		}
> +
> +		if (!nch) {
> +			netdev_err(ndp->ndev.dev, "No handler available for GMA with MFR-ID (0x%x)\n",
> +				   nc->version.mf_id);
> +			nd->state = ncsi_dev_state_config_clear_vids;
> +			schedule_work(&ndp->work);
> +			break;
> +		}
> +
> +		/* Get Mac address from NCSI device */
> +		nch->handler(&nca);
> +#endif /* CONFIG_NCSI_OEM_CMD_GET_MAC */
> +
>  		nd->state = ncsi_dev_state_config_clear_vids;
>  		break;
>  	case ncsi_dev_state_config_clear_vids:
> diff --git a/net/ncsi/ncsi-pkt.h b/net/ncsi/ncsi-pkt.h
> index 0f2087c8d42a..4d3f06be38bd 100644
> --- a/net/ncsi/ncsi-pkt.h
> +++ b/net/ncsi/ncsi-pkt.h
> @@ -165,6 +165,14 @@ struct ncsi_rsp_oem_pkt {
>  	unsigned char           data[];      /* Payload data      */
>  };
>  
> +/* Broadcom Response Data */
> +struct ncsi_rsp_oem_bcm_pkt {
> +	unsigned char           ver;         /* Payload Version   */
> +	unsigned char           type;        /* OEM Command type  */
> +	__be16                  len;         /* Payload Length    */
> +	unsigned char           data[];      /* Cmd specific Data */
> +};
> +
>  /* Get Link Status */
>  struct ncsi_rsp_gls_pkt {
>  	struct ncsi_rsp_pkt_hdr rsp;        /* Response header   */
> diff --git a/net/ncsi/ncsi-rsp.c b/net/ncsi/ncsi-rsp.c
> index d66b34749027..31672e967db2 100644
> --- a/net/ncsi/ncsi-rsp.c
> +++ b/net/ncsi/ncsi-rsp.c
> @@ -596,12 +596,50 @@ static int ncsi_rsp_handler_snfc(struct ncsi_request *nr)
>  	return 0;
>  }
>  
> +/* Response handler for Broadcom command Get Mac Address */
> +static int ncsi_rsp_handler_oem_bcm_gma(struct ncsi_request *nr)
> +{
> +	struct ncsi_rsp_oem_pkt *rsp;
> +	struct ncsi_dev_priv *ndp = nr->ndp;
> +	struct net_device *ndev = ndp->ndev.dev;
> +	int ret = 0;
> +	const struct net_device_ops *ops = ndev->netdev_ops;
> +	struct sockaddr saddr;
> +
> +	/* Get the response header */
> +	rsp = (struct ncsi_rsp_oem_pkt *)skb_network_header(nr->rsp);
> +
> +	saddr.sa_family = ndev->type;
> +	ndev->priv_flags |= IFF_LIVE_ADDR_CHANGE;
> +	memcpy(saddr.sa_data, &rsp->data[BCM_MAC_ADDR_OFFSET], ETH_ALEN);
> +	ret = ops->ndo_set_mac_address(ndev, &saddr);
> +	if (ret < 0)
> +		netdev_warn(ndev, "NCSI: Writing mac address to device failed\n");
> +
> +	return ret;
> +}
> +
> +/* Response handler for Broadcom card */
> +static int ncsi_rsp_handler_oem_bcm(struct ncsi_request *nr)
> +{
> +	struct ncsi_rsp_oem_pkt *rsp;
> +	struct ncsi_rsp_oem_bcm_pkt *bcm;
> +
> +	/* Get the response header */
> +	rsp = (struct ncsi_rsp_oem_pkt *)skb_network_header(nr->rsp);
> +	bcm = (struct ncsi_rsp_oem_bcm_pkt *)(rsp->data);
> +
> +	if (bcm->type == NCSI_OEM_BCM_CMD_GMA)
> +		return ncsi_rsp_handler_oem_bcm_gma(nr);
> +	return 0;
> +}
> +
>  static struct ncsi_rsp_oem_handler {
>  	unsigned int	mfr_id;
>  	int		(*handler)(struct ncsi_request *nr);
>  } ncsi_rsp_oem_handlers[] = {
>  	{ NCSI_OEM_MFR_MLX_ID, NULL },
> -	{ NCSI_OEM_MFR_BCM_ID, NULL }
> +	{ NCSI_OEM_MFR_BCM_ID, ncsi_rsp_handler_oem_bcm }
>  };
>  
>  /* Response handler for OEM command */
> -- 
> 2.17.1
>