From: Konrad Dybcio <konrad.dybcio@linaro.org>
To: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>,
Andy Gross <agross@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Cc: Patrick Lai <quic_plai@quicinc.com>
Subject: Re: [PATCH v3] arm64: dts: qcom: sm8550: add Soundwire controllers
Date: Wed, 5 Apr 2023 17:45:59 +0200 [thread overview]
Message-ID: <fcfaccb2-bf93-091d-d3d7-81fed6fb62fe@linaro.org> (raw)
In-Reply-To: <20230405061129.143553-1-krzysztof.kozlowski@linaro.org>
On 5.04.2023 08:11, Krzysztof Kozlowski wrote:
> Add nodes for LPASS Soundwire v2.0.0 controllers. Use labels with
> indices matching downstream DTS, to make any comparisons easier.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Konrad
>
> Changes since v2:
> 1. Use labels instead of comments (Konrad).
> 2. Use interrupts instead of interupts-extended (Konrad)
>
> Changes since v1:
> 1. Correct IO range length.
>
> The bindings and driver are here:
> https://lore.kernel.org/linux-arm-msm/20230403132503.62090-1-krzysztof.kozlowski@linaro.org/T/#t
>
> Cc: Patrick Lai <quic_plai@quicinc.com>
> ---
> arch/arm64/boot/dts/qcom/sm8550.dtsi | 109 +++++++++++++++++++++++++++
> 1 file changed, 109 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi
> index dc6150e97d46..f9eaede39b5b 100644
> --- a/arch/arm64/boot/dts/qcom/sm8550.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi
> @@ -2004,6 +2004,33 @@ lpass_wsa2macro: codec@6aa0000 {
> #sound-dai-cells = <1>;
> };
>
> + swr3: soundwire-controller@6ab0000 {
> + compatible = "qcom,soundwire-v2.0.0";
> + reg = <0 0x06ab0000 0 0x10000>;
> + interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&lpass_wsa2macro>;
> + clock-names = "iface";
> + label = "WSA2";
> +
> + qcom,din-ports = <4>;
> + qcom,dout-ports = <9>;
> +
> + qcom,ports-sinterval = <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x18f 0xff 0xff 0x0f 0x0f 0xff 0x31f>;
> + qcom,ports-offset1 = /bits/ 8 <0x01 0x03 0x05 0x02 0x04 0x15 0x00 0xff 0xff 0x06 0x0d 0xff 0x00>;
> + qcom,ports-offset2 = /bits/ 8 <0xff 0x07 0x1f 0xff 0x07 0x1f 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
> + qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>;
> + qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>;
> + qcom,ports-word-length = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x18>;
> + qcom,ports-block-pack-mode = /bits/ 8 <0x00 0x01 0x01 0x00 0x01 0x01 0x00 0x00 0x00 0x01 0x01 0x00 0x00>;
> + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
> + qcom,ports-lane-control = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
> +
> + #address-cells = <2>;
> + #size-cells = <0>;
> + #sound-dai-cells = <1>;
> + status = "disabled";
> + };
> +
> lpass_rxmacro: codec@6ac0000 {
> compatible = "qcom,sm8550-lpass-rx-macro";
> reg = <0 0x06ac0000 0 0x1000>;
> @@ -2023,6 +2050,33 @@ lpass_rxmacro: codec@6ac0000 {
> #sound-dai-cells = <1>;
> };
>
> + swr1: soundwire-controller@6ad0000 {
> + compatible = "qcom,soundwire-v2.0.0";
> + reg = <0 0x06ad0000 0 0x10000>;
> + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&lpass_rxmacro>;
> + clock-names = "iface";
> + label = "RX";
> +
> + qcom,din-ports = <0>;
> + qcom,dout-ports = <10>;
> +
> + qcom,ports-sinterval = <0x03 0x3f 0x1f 0x07 0x00 0x18f 0xff 0xff 0xff 0xff>;
> + qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x0b 0x01 0x00 0x00 0xff 0xff 0xff 0xff>;
> + qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x0b 0x00 0x00 0x00 0xff 0xff 0xff 0xff>;
> + qcom,ports-hstart = /bits/ 8 <0xff 0x03 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff>;
> + qcom,ports-hstop = /bits/ 8 <0xff 0x06 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff>;
> + qcom,ports-word-length = /bits/ 8 <0x01 0x07 0x04 0xff 0xff 0x0f 0xff 0xff 0xff 0xff>;
> + qcom,ports-block-pack-mode = /bits/ 8 <0xff 0x00 0x01 0xff 0xff 0x00 0xff 0xff 0xff 0xff>;
> + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0x00 0x00 0xff 0xff 0xff 0xff>;
> + qcom,ports-lane-control = /bits/ 8 <0x01 0x00 0x00 0x00 0x00 0x00 0xff 0xff 0xff 0xff>;
> +
> + #address-cells = <2>;
> + #size-cells = <0>;
> + #sound-dai-cells = <1>;
> + status = "disabled";
> + };
> +
> lpass_txmacro: codec@6ae0000 {
> compatible = "qcom,sm8550-lpass-tx-macro";
> reg = <0 0x06ae0000 0 0x1000>;
> @@ -2061,6 +2115,61 @@ lpass_wsamacro: codec@6b00000 {
> #sound-dai-cells = <1>;
> };
>
> + swr0: soundwire-controller@6b10000 {
> + compatible = "qcom,soundwire-v2.0.0";
> + reg = <0 0x06b10000 0 0x10000>;
> + interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&lpass_wsamacro>;
> + clock-names = "iface";
> + label = "WSA";
> +
> + qcom,din-ports = <4>;
> + qcom,dout-ports = <9>;
> +
> + qcom,ports-sinterval = <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x18f 0xff 0xff 0x0f 0x0f 0xff 0x31f>;
> + qcom,ports-offset1 = /bits/ 8 <0x01 0x03 0x05 0x02 0x04 0x15 0x00 0xff 0xff 0x06 0x0d 0xff 0x00>;
> + qcom,ports-offset2 = /bits/ 8 <0xff 0x07 0x1f 0xff 0x07 0x1f 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
> + qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>;
> + qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>;
> + qcom,ports-word-length = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x18>;
> + qcom,ports-block-pack-mode = /bits/ 8 <0x00 0x01 0x01 0x00 0x01 0x01 0x00 0x00 0x00 0x01 0x01 0x00 0x00>;
> + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
> + qcom,ports-lane-control = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
> +
> + #address-cells = <2>;
> + #size-cells = <0>;
> + #sound-dai-cells = <1>;
> + status = "disabled";
> + };
> +
> + swr2: soundwire-controller@6d30000 {
> + compatible = "qcom,soundwire-v2.0.0";
> + reg = <0 0x06d30000 0 0x10000>;
> + interrupts = <GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "core", "wakeup";
> + clocks = <&lpass_vamacro>;
> + clock-names = "iface";
> + label = "TX";
> +
> + qcom,din-ports = <4>;
> + qcom,dout-ports = <0>;
> + qcom,ports-sinterval-low = /bits/ 8 <0x01 0x01 0x03 0x03>;
> + qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x01 0x01>;
> + qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x00 0x00>;
> + qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff>;
> + qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff 0xff>;
> + qcom,ports-word-length = /bits/ 8 <0xff 0xff 0xff 0xff>;
> + qcom,ports-block-pack-mode = /bits/ 8 <0xff 0xff 0xff 0xff>;
> + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff>;
> + qcom,ports-lane-control = /bits/ 8 <0x01 0x02 0x00 0x00>;
> +
> + #address-cells = <2>;
> + #size-cells = <0>;
> + #sound-dai-cells = <1>;
> + status = "disabled";
> + };
> +
> lpass_vamacro: codec@6d44000 {
> compatible = "qcom,sm8550-lpass-va-macro";
> reg = <0 0x06d44000 0 0x1000>;
next prev parent reply other threads:[~2023-04-05 15:46 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-04-05 6:11 Krzysztof Kozlowski
2023-04-05 15:45 ` Konrad Dybcio [this message]
2023-04-07 23:40 ` Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=fcfaccb2-bf93-091d-d3d7-81fed6fb62fe@linaro.org \
--to=konrad.dybcio@linaro.org \
--cc=agross@kernel.org \
--cc=andersson@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=krzysztof.kozlowski@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=quic_plai@quicinc.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®