mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Michal Simek <michal.simek@amd.com>
To: Thippeswamy Havalige <thippeswamy.havalige@amd.com>,
	linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
	devicetree@vger.kernel.org, krzysztof.kozlowski@linaro.org
Cc: bhelgaas@google.com, michals@xilinx.com, robh+dt@kernel.org,
	nagaradhesh.yeleswarapu@amd.com, bharat.kumar.gogada@amd.com,
	lorenzo.pieralisi@arm.com
Subject: Re: [PATCH v2 2/3] dt-bindings: PCI: xilinx-xdma: Add YAML schemas for Xilinx XDMA PCIe Root Port Bridge
Date: Fri, 12 May 2023 08:50:03 +0200	[thread overview]
Message-ID: <fd0188b4-53a1-9a0d-7466-41480000cb84@amd.com> (raw)
In-Reply-To: <20230512062725.1208385-3-thippeswamy.havalige@amd.com>



On 5/12/23 08:27, Thippeswamy Havalige wrote:
> Add YAML dtschemas of Xilinx XDMA Soft IP PCIe Root Port Bridge
> dt binding.
> 
> Signed-off-by: Thippeswamy Havalige <thippeswamy.havalige@amd.com>
> Signed-off-by: Bharat Kumar Gogada <bharat.kumar.gogada@amd.com>
> ---
>   .../devicetree/bindings/pci/xlnx,xdma-host.yaml    | 117 +++++++++++++++++++++
>   1 file changed, 117 insertions(+)
>   create mode 100644 Documentation/devicetree/bindings/pci/xlnx,xdma-host.yaml
> 
> diff --git a/Documentation/devicetree/bindings/pci/xlnx,xdma-host.yaml b/Documentation/devicetree/bindings/pci/xlnx,xdma-host.yaml
> new file mode 100644
> index 0000000..e3a1ef1
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pci/xlnx,xdma-host.yaml
> @@ -0,0 +1,117 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pci/xlnx,xdma-host.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Xilinx XDMA PL PCIe Root Port Bridge
> +
> +maintainers:
> +  - Thippeswamy Havalige <thippeswamy.havalige@amd.com>
> +
> +allOf:
> +  - $ref: /schemas/pci/pci-bus.yaml#
> +
> +properties:
> +  compatible:
> +    const: xlnx,xdma-host-3.0
> +
> +  reg:
> +    maxItems: 1
> +
> +  ranges:
> +    items:
> +      - description: |
> +          ranges for the PCI memory regions (I/O space region is not
> +          supported by hardware)
> +
> +  interrupts:
> +    items:
> +      - description: interrupt asserted when miscellaneous interrupt is received.
> +      - description: msi0 interrupt asserted when an MSI is received.
> +      - description: msi1 interrupt asserted when an MSI is received.
> +
> +  interrupt-names:
> +    items:
> +      - const: misc
> +      - const: msi0
> +      - const: msi1
> +
> +  interrupt-map-mask:
> +    items:
> +      - const: 0
> +      - const: 0
> +      - const: 0
> +      - const: 7
> +
> +  interrupt-map:
> +    maxItems: 4
> +
> +  "#interrupt-cells":
> +    const: 1
> +
> +  interrupt-controller:
> +    description: identifies the node as an interrupt controller
> +    type: object
> +    properties:
> +      interrupt-controller: true
> +
> +      "#address-cells":
> +        const: 0
> +
> +      "#interrupt-cells":
> +        const: 1
> +
> +    required:
> +      - interrupt-controller
> +      - "#address-cells"
> +      - "#interrupt-cells"
> +
> +    additionalProperties: false
> +
> +required:
> +  - compatible
> +  - reg
> +  - ranges
> +  - interrupts
> +  - interrupt-map
> +  - interrupt-map-mask
> +  - "#interrupt-cells"
> +  - interrupt-controller
> +
> +unevaluatedProperties: false
> +
> +examples:
> +
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +
> +    soc {
> +        #address-cells = <2>;
> +        #size-cells = <2>;
> +        pcie@a0000000 {
> +            compatible = "xlnx,xdma-host-3.00";

This doesn't match with version listed above.

And when it is fixed I am getting.

/home/monstr/data/disk/linux/Documentation/devicetree/bindings/pci/xlnx,xdma-host.example.dtb: 
pcie@a0000000: ranges: [[33554432, 0, 2952790016, 0, 2952790016, 0, 16777216], 
[1124073472, 5, 0, 5, 0, 0, 16777216]] is too long
	From schema: 
/home/monstr/data/disk/linux/Documentation/devicetree/bindings/pci/xlnx,xdma-host.yaml
/home/monstr/data/disk/linux/Documentation/devicetree/bindings/pci/xlnx,xdma-host.example.dtb: 
pcie@a0000000: interrupt-map: [[0, 0, 0, 1, 2, 0, 0, 0], [0, 2, 2, 1, 0, 0, 0, 
3], [2, 2, 0, 0, 0, 4, 2, 3]] is too short
	From schema: 
/home/monstr/data/disk/linux/Documentation/devicetree/bindings/pci/xlnx,xdma-host.yaml
/home/monstr/data/disk/linux/Documentation/devicetree/bindings/pci/xlnx,xdma-host.example.dtb: 
pcie@a0000000: interrupt-controller:#address-cells:0:0: 0 was expected
	From schema: 
/home/monstr/data/disk/linux/Documentation/devicetree/bindings/pci/xlnx,xdma-host.yaml
/home/monstr/data/disk/linux/Documentation/devicetree/bindings/pci/xlnx,xdma-host.example.dtb: 
pcie@a0000000: Unevaluated properties are not allowed ('interrupt-controller' 
was unexpected)
	From schema: 
/home/monstr/data/disk/linux/Documentation/devicetree/bindings/pci/xlnx,xdma-host.yaml



> +            reg = <0x0 0xa0000000 0x0 0x10000000>;
> +            #address-cells = <3>;
> +            #size-cells = <2>;
> +            #interrupt-cells = <1>;
> +            device_type = "pci";
> +            interrupt-parent = <&gic>;
> +            interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
> +                         <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
> +            interrupt-names = "misc", "msi0", "msi1";
> +            interrupt-map-mask = <0x0 0x0 0x0 0x7>;
> +            interrupt-map = <0 0 0 1 &pcie_intc_0 0>,
> +                            <0 0 0 2 &pcie_intc_0 1>,
> +                            <0 0 0 3 &pcie_intc_0 2>,
> +                            <0 0 0 4 &pcie_intc_0 3>;
> +            ranges = <0x2000000 0x0 0xb0000000 0x0 0xb0000000 0x0 0x1000000>,
> +                     <0x43000000 0x5 0x0 0x5 0x0 0x0 0x1000000>;
> +            pcie_intc_0: interrupt-controller {
> +                #address-cells = <2>;
> +                #interrupt-cells = <1>;
> +                interrupt-controller ;

space is not necessary.

> +            };
> +        };
> +    };

M

  reply	other threads:[~2023-05-12  6:50 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-05-12  6:27 [PATCH v2 0/3] Add support for Xilinx XDMA Soft IP as Root Port Thippeswamy Havalige
2023-05-12  6:27 ` [PATCH v2 1/3] Move error interrupt bits to a common header Thippeswamy Havalige
2023-05-12  6:45   ` Michal Simek
2023-05-12 19:23   ` Bjorn Helgaas
2023-05-12  6:27 ` [PATCH v2 2/3] dt-bindings: PCI: xilinx-xdma: Add YAML schemas for Xilinx XDMA PCIe Root Port Bridge Thippeswamy Havalige
2023-05-12  6:50   ` Michal Simek [this message]
2023-05-12 11:26   ` Krzysztof Kozlowski
2023-05-12  6:27 ` [PATCH v2 3/3] PCI: xilinx-xdma: Add Xilinx XDMA Root Port driver Thippeswamy Havalige
2023-05-12  7:04   ` Michal Simek
2023-05-12 17:43   ` Bjorn Helgaas
2023-05-18  4:55     ` Havalige, Thippeswamy
2023-05-12 19:32   ` Bjorn Helgaas
2023-05-18  4:58     ` Havalige, Thippeswamy
2023-05-16 17:19   ` kernel test robot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=fd0188b4-53a1-9a0d-7466-41480000cb84@amd.com \
    --to=michal.simek@amd.com \
    --cc=bharat.kumar.gogada@amd.com \
    --cc=bhelgaas@google.com \
    --cc=devicetree@vger.kernel.org \
    --cc=krzysztof.kozlowski@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=michals@xilinx.com \
    --cc=nagaradhesh.yeleswarapu@amd.com \
    --cc=robh+dt@kernel.org \
    --cc=thippeswamy.havalige@amd.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®