mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Guenter Roeck <linux@roeck-us.net>
To: Hans de Goede <hdegoede@redhat.com>,
	Darren Hart <dvhart@infradead.org>,
	Andy Shevchenko <andy@infradead.org>,
	MyungJoo Ham <myungjoo.ham@samsung.com>,
	Chanwoo Choi <cw00.choi@samsung.com>,
	Mathias Nyman <mathias.nyman@intel.com>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: platform-driver-x86@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-usb@vger.kernel.org
Subject: Re: [PATCH v2 05/12] usb: typec: tcpm: Set USB role switch to device mode when configured as such
Date: Sun, 25 Feb 2018 13:33:23 -0800	[thread overview]
Message-ID: <fda5b338-7472-4429-8752-9bd6debf331c@roeck-us.net> (raw)
In-Reply-To: <20180225152510.10159-6-hdegoede@redhat.com>

On 02/25/2018 07:25 AM, Hans de Goede wrote:
> Setting the mux to MUX_NONE and the switch to USB_SWITCH_DISCONNECT when
> the data-role is device is not correct. Plenty of devices support
> operating as USB device through a (separate) USB device controller.
> 
> We really need 2 different versions of USB_SWITCH_CONNECT,
> USB_SWITCH_CONNECT_HOST and USB_SWITCH_DEVICE. Rather then modifying the
> tcpc_usb_switch enum for this, simply remove it and switch to the
> usb_role enum which provides exactly this, this will save use needing to
> convert betweent the 2 enums when calling an usb-role-switch driver later.
> 
> Besides switching to the usb_role type, this commit also actually sets the
> mux to TYPEC_MUX_USB and the switch to USB_ROLE_DEVICE instead of setting
> both to none when the data-role is device.
> 
> This commit also makes tcpm_reset_port() call tcpm_mux_set(port,
> TYPEC_MUX_NONE, USB_ROLE_NONE) so that the mux and switch
> do _not_ stay in their last mode after a detach.
> 
> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>

Reviewed-by: Guenter Roeck <linux@roeck-us.net>

> ---
> Changes in v2:
> -Added Heikki's Reviewed-by
> ---
>   drivers/usb/typec/tcpm.c | 22 +++++++++++-----------
>   include/linux/usb/tcpm.h |  8 ++------
>   2 files changed, 13 insertions(+), 17 deletions(-)
> 
> diff --git a/drivers/usb/typec/tcpm.c b/drivers/usb/typec/tcpm.c
> index 7cd28b700a7f..00ca2822432f 100644
> --- a/drivers/usb/typec/tcpm.c
> +++ b/drivers/usb/typec/tcpm.c
> @@ -618,15 +618,15 @@ void tcpm_pd_transmit_complete(struct tcpm_port *port,
>   EXPORT_SYMBOL_GPL(tcpm_pd_transmit_complete);
>   
>   static int tcpm_mux_set(struct tcpm_port *port, enum tcpc_mux_mode mode,
> -			enum tcpc_usb_switch config)
> +			enum usb_role usb_role)
>   {
>   	int ret = 0;
>   
> -	tcpm_log(port, "Requesting mux mode %d, config %d, polarity %d",
> -		 mode, config, port->polarity);
> +	tcpm_log(port, "Requesting mux mode %d, usb-role %d, polarity %d",
> +		 mode, usb_role, port->polarity);
>   
>   	if (port->tcpc->mux)
> -		ret = port->tcpc->mux->set(port->tcpc->mux, mode, config,
> +		ret = port->tcpc->mux->set(port->tcpc->mux, mode, usb_role,
>   					   port->polarity);
>   
>   	return ret;
> @@ -742,14 +742,15 @@ static int tcpm_set_attached_state(struct tcpm_port *port, bool attached)
>   static int tcpm_set_roles(struct tcpm_port *port, bool attached,
>   			  enum typec_role role, enum typec_data_role data)
>   {
> +	enum usb_role usb_role;
>   	int ret;
>   
>   	if (data == TYPEC_HOST)
> -		ret = tcpm_mux_set(port, TYPEC_MUX_USB,
> -				   TCPC_USB_SWITCH_CONNECT);
> +		usb_role = USB_ROLE_HOST;
>   	else
> -		ret = tcpm_mux_set(port, TYPEC_MUX_NONE,
> -				   TCPC_USB_SWITCH_DISCONNECT);
> +		usb_role = USB_ROLE_DEVICE;
> +
> +	ret = tcpm_mux_set(port, TYPEC_MUX_USB, usb_role);
>   	if (ret < 0)
>   		return ret;
>   
> @@ -2096,7 +2097,7 @@ static int tcpm_src_attach(struct tcpm_port *port)
>   out_disable_pd:
>   	port->tcpc->set_pd_rx(port->tcpc, false);
>   out_disable_mux:
> -	tcpm_mux_set(port, TYPEC_MUX_NONE, TCPC_USB_SWITCH_DISCONNECT);
> +	tcpm_mux_set(port, TYPEC_MUX_NONE, USB_ROLE_NONE);
>   	return ret;
>   }
>   
> @@ -2140,6 +2141,7 @@ static void tcpm_reset_port(struct tcpm_port *port)
>   	tcpm_init_vconn(port);
>   	tcpm_set_current_limit(port, 0, 0);
>   	tcpm_set_polarity(port, TYPEC_POLARITY_CC1);
> +	tcpm_mux_set(port, TYPEC_MUX_NONE, USB_ROLE_NONE);
>   	tcpm_set_attached_state(port, false);
>   	port->try_src_count = 0;
>   	port->try_snk_count = 0;
> @@ -2190,8 +2192,6 @@ static int tcpm_snk_attach(struct tcpm_port *port)
>   static void tcpm_snk_detach(struct tcpm_port *port)
>   {
>   	tcpm_detach(port);
> -
> -	/* XXX: (Dis)connect SuperSpeed mux? */
>   }
>   
>   static int tcpm_acc_attach(struct tcpm_port *port)
> diff --git a/include/linux/usb/tcpm.h b/include/linux/usb/tcpm.h
> index ca1c0b57f03f..268721bff2c1 100644
> --- a/include/linux/usb/tcpm.h
> +++ b/include/linux/usb/tcpm.h
> @@ -16,6 +16,7 @@
>   #define __LINUX_USB_TCPM_H
>   
>   #include <linux/bitops.h>
> +#include <linux/usb/role.h>
>   #include <linux/usb/typec.h>
>   #include "pd.h"
>   
> @@ -97,11 +98,6 @@ struct tcpc_config {
>   	const struct typec_altmode_desc *alt_modes;
>   };
>   
> -enum tcpc_usb_switch {
> -	TCPC_USB_SWITCH_CONNECT,
> -	TCPC_USB_SWITCH_DISCONNECT,
> -};
> -
>   /* Mux state attributes */
>   #define TCPC_MUX_USB_ENABLED		BIT(0)	/* USB enabled */
>   #define TCPC_MUX_DP_ENABLED		BIT(1)	/* DP enabled */
> @@ -118,7 +114,7 @@ enum tcpc_mux_mode {
>   
>   struct tcpc_mux_dev {
>   	int (*set)(struct tcpc_mux_dev *dev, enum tcpc_mux_mode mux_mode,
> -		   enum tcpc_usb_switch usb_config,
> +		   enum usb_role usb_role,
>   		   enum typec_cc_polarity polarity);
>   	bool dfp_only;
>   	void *priv_data;
> 


  reply	other threads:[~2018-02-25 21:33 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-02-25 15:24 [PATCH v2 00/12] USB Type-C device-connection, mux and switch support Hans de Goede
2018-02-25 15:24 ` [PATCH v2 01/12] drivers: base: Unified device connection lookup Hans de Goede
2018-02-25 19:04   ` Randy Dunlap
2018-02-25 15:25 ` [PATCH v2 02/12] usb: typec: Start using ERR_PTR Hans de Goede
2018-02-25 21:38   ` Guenter Roeck
2018-02-25 15:25 ` [PATCH v2 03/12] usb: typec: API for controlling USB Type-C Multiplexers Hans de Goede
2018-02-25 19:22   ` Randy Dunlap
2018-02-25 15:25 ` [PATCH v2 04/12] usb: common: Small class for USB role switches Hans de Goede
2018-02-25 15:25 ` [PATCH v2 05/12] usb: typec: tcpm: Set USB role switch to device mode when configured as such Hans de Goede
2018-02-25 21:33   ` Guenter Roeck [this message]
2018-02-25 15:25 ` [PATCH v2 06/12] usb: typec: tcpm: Use new Type-C switch/mux and usb-role-switch functions Hans de Goede
2018-02-25 21:38   ` Guenter Roeck
2018-02-25 15:25 ` [PATCH v2 07/12] xhci: Add option to get next extended capability in list by passing id = 0 Hans de Goede
2018-02-25 15:25 ` [PATCH v2 08/12] xhci: Add Intel extended cap / otg phy mux handling Hans de Goede
2018-02-25 15:25 ` [PATCH v2 09/12] usb: roles: Add Intel xHCI USB role switch driver Hans de Goede
2018-02-25 18:48   ` Randy Dunlap
2018-02-25 15:25 ` [PATCH v2 10/12] usb: typec: driver for Pericom PI3USB30532 Type-C cross switch Hans de Goede
2018-02-25 15:25 ` [PATCH v2 11/12] platform/x86: intel_cht_int33fe: Add device connections for the Type-C port Hans de Goede
2018-02-25 15:25 ` [PATCH v2 12/12] extcon: axp288: Set USB role where necessary Hans de Goede
2018-02-25 18:51   ` Randy Dunlap
2018-02-26  8:07     ` Hans de Goede

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=fda5b338-7472-4429-8752-9bd6debf331c@roeck-us.net \
    --to=linux@roeck-us.net \
    --cc=andy@infradead.org \
    --cc=cw00.choi@samsung.com \
    --cc=dvhart@infradead.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=hdegoede@redhat.com \
    --cc=heikki.krogerus@linux.intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=mathias.nyman@intel.com \
    --cc=myungjoo.ham@samsung.com \
    --cc=platform-driver-x86@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®