Re: [PATCH] mtd: spi-nor: add support for GD25Q256

[Cyrille Pitchen <cyrille.pitchen@atmel.com>]

Hi Andy,

Le 14/02/2017 à 01:36, Andy Yan a écrit :
> GD25Q256 is a 32MiB SPI Nor flash from Gigadevice.
> 
> Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
> ---
>  drivers/mtd/spi-nor/spi-nor.c | 8 ++++++--
>  1 file changed, 6 insertions(+), 2 deletions(-)
>  mode change 100644 => 100755 drivers/mtd/spi-nor/spi-nor.c
> 
> diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
> old mode 100644
> new mode 100755
> index da7cd69..0917dd3
> --- a/drivers/mtd/spi-nor/spi-nor.c
> +++ b/drivers/mtd/spi-nor/spi-nor.c
> @@ -852,6 +852,10 @@ static const struct flash_info spi_nor_ids[] = {
>  			SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
>  			SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
>  	},
> +	{
> +		"gd25q256", INFO(0xc84019, 0, 64 * 1024, 512,
> +			SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
> +	},
>  
>  	/* Intel/Numonyx -- xxxs33b */
>  	{ "160s33b",  INFO(0x898911, 0, 64 * 1024,  32, 0) },
> @@ -1483,7 +1487,8 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode)
>  	else if (mtd->size > 0x1000000) {
>  		/* enable 4-byte addressing if the device exceeds 16MiB */
>  		nor->addr_width = 4;
> -		if (JEDEC_MFR(info) == SNOR_MFR_SPANSION) {
> +		if (JEDEC_MFR(info) == SNOR_MFR_SPANSION ||
> +		    JEDEC_MFR(info) == SNOR_MFR_GIGADEVICE) {
>  			/* Dedicated 4-byte command set */
>  			switch (nor->flash_read) {
>  			case SPI_NOR_QUAD:

This doesn't apply to the spi-nor tree  and also, please use the
SPI_NOR_4B_OPCODES info->flags instead of adding a "JEDEC_MFR(info) ==
SNOR_MFR_GIGADEVICE" line.

I think setting flags at the memory part level is safer than applying a
global policy per manufacturer.

Best regards,

Cyrille


> @@ -1519,7 +1524,6 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode)
>  
>  	dev_info(dev, "%s (%lld Kbytes)\n", info->name,
>  			(long long)mtd->size >> 10);
> -
>  	dev_dbg(dev,
>  		"mtd .name = %s, .size = 0x%llx (%lldMiB), "
>  		".erasesize = 0x%.8x (%uKiB) .numeraseregions = %d\n",
>