From: "Yu, Mingli" <mingli.yu@windriver.com>
To: "Luck, Tony" <tony.luck@intel.com>, "bp@alien8.de" <bp@alien8.de>,
"tglx@linutronix.de" <tglx@linutronix.de>,
"mingo@redhat.com" <mingo@redhat.com>,
"dave.hansen@linux.intel.com" <dave.hansen@linux.intel.com>,
"x86@kernel.org" <x86@kernel.org>
Cc: "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"He, Zhe" <Zhe.He@windriver.com>
Subject: Re: [QUESTION] Why there is additional info print when run "mce-inject uncorrect_error"
Date: Thu, 5 Dec 2024 15:44:28 +0800 [thread overview]
Message-ID: <fdc0ceef-7dc1-424e-9bed-444e8c06c4f0@windriver.com> (raw)
In-Reply-To: <SJ1PR11MB608368A4CCDF7E43AFE4A866FC372@SJ1PR11MB6083.namprd11.prod.outlook.com>
[-- Attachment #1: Type: text/plain, Size: 37473 bytes --]
Hi Tony,
On 12/5/24 00:11, Luck, Tony wrote:
> **
> *CAUTION: This email comes from a non Wind River email account!*
> Do not click links or open attachments unless you recognize the sender
> and know the content is safe.
>
>> Console: switching to colour frame buffer device 128x48
>
>> ast 0000:06:00.0: [drm] fb0: astdrmfb frame buffer device
>
>> cfg80211: Loading compiled-in X.509 certificates for regulatory database
>
>> cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
>
>> cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
>
>> 8021q: 802.1Q VLAN Support v1.8
>
>> 8021q: adding VLAN 0 to HW filter on device eth0
>
>> 8021q: adding VLAN 0 to HW filter on device eth1
>
>> 8021q: adding VLAN 0 to HW filter on device eth2
>
>> 8021q: adding VLAN 0 to HW filter on device eth3
>
>> pps pps0: new PPS source ptp4
>
>> ixgbe 0000:07:00.0: registered PHC device on eth4
>
>> 8021q: adding VLAN 0 to HW filter on device eth4
>
>> pps pps1: new PPS source ptp5
>
>> ixgbe 0000:07:00.1: registered PHC device on eth5
>
>> 8021q: adding VLAN 0 to HW filter on device eth5
>
>> pps pps2: new PPS source ptp6
>
>> ixgbe 0000:08:00.0: registered PHC device on eth6
>
>> 8021q: adding VLAN 0 to HW filter on device eth6
>
>> pps pps3: new PPS source ptp7
>
>> ixgbe 0000:08:00.1: registered PHC device on eth7
>
>> 8021q: adding VLAN 0 to HW filter on device eth7
>
> These messages all look like normal boot messages from before
>
> you ran mce_inject.
>
> Can you build your kernel with :
>
> CONFIG_PRINTK_TIME=y
I have added CONFIG_PRINTK_TIME=y to rerun the tests with "quiet" passed
to boot parameter.
And found the additional message which printed when run "mce-inject
uncorrect_error" seems come from dmesg.
root@intel-x86-64:~# mce-inject uncorrect_error
[ 10.935971] systemd[1]: Queued start job for default target
Multi-User System.
[ 11.026944] systemd[1]: Created slice Slice /system/getty.
[ 11.028248] systemd[1]: Created slice Slice /system/modprobe.
[ 11.029453] systemd[1]: Created slice Slice /system/serial-getty.
[ 11.030652] systemd[1]: Created slice User and Session Slice.
[ 11.030729] systemd[1]: Started Dispatch Password Requests to Console
Directory Watch.
[ 11.030785] systemd[1]: Started Forward Password Requests to Wall
Directory Watch.
[ 11.030810] systemd[1]: Reached target ceph target allowing to
start/stop all ceph-immutable-object-cache@.service instances at once.
[ 11.030829] systemd[1]: Reached target ceph target allowing to
start/stop all ceph-mon@.service instances at once.
[ 11.030843] systemd[1]: Reached target ceph target allowing to
start/stop all ceph-mds@.service instances at once.
[ 11.030851] systemd[1]: Reached target ceph target allowing to
start/stop all ceph-mgr@.service instances at once.
[ 11.030862] systemd[1]: Reached target ceph target allowing to
start/stop all ceph-osd@.service instances at once.
[ 11.030871] systemd[1]: Reached target ceph target allowing to
start/stop all ceph-radosgw@.service instances at once.
[ 11.030882] systemd[1]: Reached target ceph target allowing to
start/stop all ceph-rbd-mirror@.service instances at once.
[ 11.030919] systemd[1]: Reached target Path Units.
[ 11.030941] systemd[1]: Reached target Slice Units.
[ 11.030958] systemd[1]: Reached target Swaps.
[ 11.030977] systemd[1]: Reached target Libvirt guests shutdown.
[ 11.031974] systemd[1]: Listening on RPCbind Server Activation Socket.
[ 11.031994] systemd[1]: Reached target RPC Port Mapper.
[ 11.032510] systemd[1]: Listening on Syslog Socket.
[ 11.032605] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 11.050031] systemd[1]: Journal Audit Socket was skipped because of a
failed condition check (ConditionSecurity=audit).
[ 11.050351] systemd[1]: Listening on Journal Socket (/dev/log).
[ 11.050493] systemd[1]: Listening on Journal Socket.
[ 11.050892] systemd[1]: Listening on Network Service Netlink Socket.
[ 11.051804] systemd[1]: Listening on udev Control Socket.
[ 11.051912] systemd[1]: Listening on udev Kernel Socket.
[ 11.052252] systemd[1]: Listening on User Database Manager Socket.
[ 11.053977] systemd[1]: Mounting Huge Pages File System...
[ 11.055838] systemd[1]: Mounting POSIX Message Queue File System...
[ 11.057625] systemd[1]: Mounting Kernel Debug File System...
[ 11.059422] systemd[1]: Mounting Kernel Trace File System...
[ 11.062384] systemd[1]: Mounting Temporary Directory /tmp...
[ 11.064860] systemd[1]: Starting Create List of Static Device Nodes...
[ 11.066455] systemd[1]: Starting Load Kernel Module configfs...
[ 11.067920] systemd[1]: Starting Load Kernel Module drm...
[ 11.069378] systemd[1]: Starting Load Kernel Module fuse...
[ 11.072461] systemd[1]: Starting RPC Bind...
[ 11.072762] systemd[1]: File System Check on Root Device was skipped
because of a failed condition check (ConditionPathIsReadWrite=!/).
[ 11.072979] systemd[1]: systemd-journald.service: unit configures an
IP firewall, but the local system does not support BPF/cgroup firewalling.
[ 11.072982] systemd[1]: (This warning is only shown for the first
unit using IP firewalling.)
[ 11.075089] systemd[1]: Starting Journal Service...
[ 11.078880] systemd[1]: Starting Load Kernel Modules...
[ 11.080315] fuse: init (API version 7.34)
[ 11.080697] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 11.082426] systemd[1]: Starting Coldplug All udev Devices...
[ 11.084118] systemd[1]: Mounted Huge Pages File System.
[ 11.084226] systemd[1]: Mounted POSIX Message Queue File System.
[ 11.084324] systemd[1]: Mounted Kernel Debug File System.
[ 11.084426] systemd[1]: Mounted Kernel Trace File System.
[ 11.084515] systemd[1]: Mounted Temporary Directory /tmp.
[ 11.084910] systemd[1]: Finished Create List of Static Device Nodes.
[ 11.085166] systemd[1]: modprobe@configfs.service: Deactivated
successfully.
[ 11.085385] systemd[1]: Finished Load Kernel Module configfs.
[ 11.085645] systemd[1]: modprobe@drm.service: Deactivated successfully.
[ 11.085859] systemd[1]: Finished Load Kernel Module drm.
[ 11.086098] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[ 11.086304] systemd[1]: Finished Load Kernel Module fuse.
[ 11.088115] systemd[1]: Mounting FUSE Control File System...
[ 11.089895] systemd[1]: Mounting Kernel Configuration File System...
[ 11.095692] systemd[1]: Mounted FUSE Control File System.
[ 11.097089] systemd[1]: Mounted Kernel Configuration File System.
[ 11.103484] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 11.105621] systemd[1]: Rebuild Hardware Database was skipped because
all trigger condition checks failed.
[ 11.105677] systemd[1]: Platform Persistent Storage Archival was
skipped because of a failed condition check
(ConditionDirectoryNotEmpty=/sys/fs/pstore).
[ 11.108122] systemd[1]: Starting Create System Users...
[ 11.108321] systemd[1]: Started RPC Bind.
[ 11.150872] systemd[1]: Finished Create System Users.
[ 11.153016] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 11.171569] openvswitch: Open vSwitch switching datapath
[ 11.173142] systemd[1]: Finished Load Kernel Modules.
[ 11.175027] systemd[1]: Starting Apply Kernel Variables...
[ 11.192279] systemd[1]: Finished Create Static Device Nodes in /dev.
[ 11.192362] systemd[1]: Reached target Preparation for Local File
Systems.
[ 11.194702] systemd[1]: Starting Rule-based Manager for Device Events
and Files...
[ 11.199578] systemd[1]: Finished Apply Kernel Variables.
[ 11.222104] systemd[1]: Started Journal Service.
[ 11.233691] systemd-journald[1161]: Received client request to flush
runtime journal.
[ 11.442810] mgag200 0000:07:00.0: vgaarb: deactivate vga console
[ 11.450389] Console: switching to colour dummy device 80x25
[ 11.459180] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 11.460314] i2c i2c-1: 8/24 memory slots populated (from DMI)
[ 11.460317] i2c i2c-1: Systems with more than 4 memory slots not
supported yet, not instantiating SPD
[ 11.460344] [drm] Initialized mgag200 1.0.0 20110418 for 0000:07:00.0
on minor 0
[ 11.468069] cryptd: max_cpu_qlen set to 1000
[ 11.478985] power_meter ACPI000D:00: Found ACPI power meter.
[ 11.479084] power_meter ACPI000D:00: Ignoring unsafe software power cap!
[ 11.479093] power_meter ACPI000D:00: hwmon_device_register() is
deprecated. Please convert the driver to use
hwmon_device_register_with_info().
[ 11.495505] AVX2 version of gcm_enc/dec engaged.
[ 11.495621] AES CTR mode by8 optimization enabled
[ 11.498328] fbcon: mgag200drmfb (fb0) is primary device
[ 11.500956] mgag200 0000:07:00.0: [drm]
drm_plane_enable_fb_damage_clips() not called
[ 11.608947] Console: switching to colour frame buffer device 160x64
[ 11.646364] mgag200 0000:07:00.0: [drm] fb0: mgag200drmfb frame
buffer device
[ 11.658006] iTCO_vendor_support: vendor-support=0
[ 11.806035] iTCO_wdt iTCO_wdt.1.auto: unable to reset NO_REBOOT flag,
device disabled by hardware/BIOS
[ 12.137185] EDAC DEBUG: sbridge_init:
[ 12.137189] EDAC sbridge: Seeking for: PCI ID 8086:6fa0
[ 12.137209] EDAC DEBUG: sbridge_get_onedevice: Detected 8086:6fa0
[ 12.137210] EDAC sbridge: Seeking for: PCI ID 8086:6fa0
[ 12.137227] EDAC DEBUG: sbridge_get_onedevice: Detected 8086:6fa0
[ 12.137228] EDAC sbridge: Seeking for: PCI ID 8086:6fa0
[ 12.137244] EDAC sbridge: Seeking for: PCI ID 8086:6f60
[ 12.137251] EDAC DEBUG: sbridge_get_onedevice: Detected 8086:6f60
[ 12.137252] EDAC sbridge: Seeking for: PCI ID 8086:6f60
[ 12.137260] EDAC DEBUG: sbridge_get_onedevice: Detected 8086:6f60
[ 12.137261] EDAC sbridge: Seeking for: PCI ID 8086:6f60
[ 12.137266] EDAC sbridge: Seeking for: PCI ID 8086:6fa8
[ 12.137273] EDAC DEBUG: sbridge_get_onedevice: Detected 8086:6fa8
[ 12.137274] EDAC sbridge: Seeking for: PCI ID 8086:6fa8
[ 12.137281] EDAC DEBUG: sbridge_get_onedevice: Detected 8086:6fa8
[ 12.137283] EDAC sbridge: Seeking for: PCI ID 8086:6fa8
[ 12.137287] EDAC sbridge: Seeking for: PCI ID 8086:6f71
[ 12.137294] EDAC DEBUG: sbridge_get_onedevice: Detected 8086:6f71
[ 12.137294] EDAC sbridge: Seeking for: PCI ID 8086:6f71
[ 12.137302] EDAC DEBUG: sbridge_get_onedevice: Detected 8086:6f71
[ 12.137303] EDAC sbridge: Seeking for: PCI ID 8086:6f71
[ 12.137308] EDAC sbridge: Seeking for: PCI ID 8086:6faa
[ 12.137314] EDAC DEBUG: sbridge_get_onedevice: Detected 8086:6faa
[ 12.137315] EDAC sbridge: Seeking for: PCI ID 8086:6faa
[ 12.137323] EDAC DEBUG: sbridge_get_onedevice: Detected 8086:6faa
[ 12.137324] EDAC sbridge: Seeking for: PCI ID 8086:6faa
[ 12.137329] EDAC sbridge: Seeking for: PCI ID 8086:6fab
[ 12.137335] EDAC DEBUG: sbridge_get_onedevice: Detected 8086:6fab
[ 12.137336] EDAC sbridge: Seeking for: PCI ID 8086:6fab
[ 12.137344] EDAC DEBUG: sbridge_get_onedevice: Detected 8086:6fab
[ 12.137345] EDAC sbridge: Seeking for: PCI ID 8086:6fab
[ 12.137349] EDAC sbridge: Seeking for: PCI ID 8086:6fac
[ 12.137363] EDAC sbridge: Seeking for: PCI ID 8086:6fad
[ 12.137377] EDAC sbridge: Seeking for: PCI ID 8086:6f68
[ 12.137384] EDAC DEBUG: sbridge_get_onedevice: Detected 8086:6f68
[ 12.137385] EDAC sbridge: Seeking for: PCI ID 8086:6f68
[ 12.137392] EDAC DEBUG: sbridge_get_onedevice: Detected 8086:6f68
[ 12.137393] EDAC sbridge: Seeking for: PCI ID 8086:6f68
[ 12.137398] EDAC sbridge: Seeking for: PCI ID 8086:6f79
[ 12.137405] EDAC DEBUG: sbridge_get_onedevice: Detected 8086:6f79
[ 12.137406] EDAC sbridge: Seeking for: PCI ID 8086:6f79
[ 12.137414] EDAC DEBUG: sbridge_get_onedevice: Detected 8086:6f79
[ 12.137415] EDAC sbridge: Seeking for: PCI ID 8086:6f79
[ 12.137419] EDAC sbridge: Seeking for: PCI ID 8086:6f6a
[ 12.137426] EDAC DEBUG: sbridge_get_onedevice: Detected 8086:6f6a
[ 12.137427] EDAC sbridge: Seeking for: PCI ID 8086:6f6a
[ 12.137435] EDAC DEBUG: sbridge_get_onedevice: Detected 8086:6f6a
[ 12.137436] EDAC sbridge: Seeking for: PCI ID 8086:6f6a
[ 12.137440] EDAC sbridge: Seeking for: PCI ID 8086:6f6b
[ 12.137447] EDAC DEBUG: sbridge_get_onedevice: Detected 8086:6f6b
[ 12.137448] EDAC sbridge: Seeking for: PCI ID 8086:6f6b
[ 12.137455] EDAC DEBUG: sbridge_get_onedevice: Detected 8086:6f6b
[ 12.137456] EDAC sbridge: Seeking for: PCI ID 8086:6f6b
[ 12.137460] EDAC sbridge: Seeking for: PCI ID 8086:6f6c
[ 12.137474] EDAC sbridge: Seeking for: PCI ID 8086:6f6d
[ 12.137487] EDAC sbridge: Seeking for: PCI ID 8086:6ffc
[ 12.137493] EDAC DEBUG: sbridge_get_onedevice: Detected 8086:6ffc
[ 12.137494] EDAC sbridge: Seeking for: PCI ID 8086:6ffc
[ 12.137501] EDAC DEBUG: sbridge_get_onedevice: Detected 8086:6ffc
[ 12.137502] EDAC sbridge: Seeking for: PCI ID 8086:6ffc
[ 12.137508] EDAC sbridge: Seeking for: PCI ID 8086:6ffd
[ 12.137514] EDAC DEBUG: sbridge_get_onedevice: Detected 8086:6ffd
[ 12.137515] EDAC sbridge: Seeking for: PCI ID 8086:6ffd
[ 12.137523] EDAC DEBUG: sbridge_get_onedevice: Detected 8086:6ffd
[ 12.137524] EDAC sbridge: Seeking for: PCI ID 8086:6ffd
[ 12.137530] EDAC sbridge: Seeking for: PCI ID 8086:6faf
[ 12.137536] EDAC DEBUG: sbridge_get_onedevice: Detected 8086:6faf
[ 12.137537] EDAC sbridge: Seeking for: PCI ID 8086:6faf
[ 12.137545] EDAC DEBUG: sbridge_get_onedevice: Detected 8086:6faf
[ 12.137546] EDAC sbridge: Seeking for: PCI ID 8086:6faf
[ 12.137550] EDAC DEBUG: sbridge_probe: Registering MC#0 (1 of 4)
[ 12.137573] EDAC DEBUG: edac_mc_alloc: allocating 2576 bytes for mci
data (18 dimms, 18 csrows/channels)
[ 12.137597] EDAC DEBUG: sbridge_register_mci: MC: mci =
00000000c86f7a81, dev = 0000000081ea8d1e
[ 12.137611] EDAC DEBUG: broadwell_mci_bind_devs: Associated PCI
ff.18.0 with dev = 000000009471403c
[ 12.137613] EDAC DEBUG: broadwell_mci_bind_devs: Associated PCI
ff.19.0 with dev = 00000000ffbba7ea
[ 12.137615] EDAC DEBUG: broadwell_mci_bind_devs: Associated PCI
ff.19.1 with dev = 0000000000763b7c
[ 12.137616] EDAC DEBUG: broadwell_mci_bind_devs: Associated PCI
ff.19.2 with dev = 00000000fba51f60
[ 12.137618] EDAC DEBUG: broadwell_mci_bind_devs: Associated PCI
ff.19.3 with dev = 0000000049664649
[ 12.137620] EDAC DEBUG: broadwell_mci_bind_devs: Associated PCI
ff.15.4 with dev = 00000000194d215e
[ 12.137621] EDAC DEBUG: broadwell_mci_bind_devs: Associated PCI
ff.15.5 with dev = 000000000c521c04
[ 12.137623] EDAC DEBUG: broadwell_mci_bind_devs: Associated PCI
ff.19.7 with dev = 000000003f33f221
[ 12.137627] EDAC DEBUG: get_dimm_config: mc#0: Node ID: 1, source ID: 1
[ 12.137629] EDAC DEBUG: get_dimm_config: Memory mirroring is disabled
[ 12.137630] EDAC DEBUG: get_dimm_config: Lockstep is disabled
[ 12.137631] EDAC DEBUG: get_dimm_config: address map is on open page mode
[ 12.137633] EDAC DEBUG: __populate_dimms: Memory is registered
[ 12.137634] EDAC DEBUG: __populate_dimms: mc#0: ha 0 channel 0, dimm
0, 8192 MiB (2097152 pages) bank: 16, rank: 1, row: 0x10000, col: 0x400
[ 12.137639] EDAC DEBUG: __populate_dimms: mc#0: ha 0 channel 1, dimm
0, 8192 MiB (2097152 pages) bank: 16, rank: 1, row: 0x10000, col: 0x400
[ 12.137644] EDAC DEBUG: get_memory_layout: TOLM: 2.000 GB
(0x000000007fffffff)
[ 12.137646] EDAC DEBUG: get_memory_layout: TOHM: 66.000 GB
(0x000000107fffffff)
[ 12.137648] EDAC DEBUG: get_memory_layout: SAD#0 DRAM up to 34.000 GB
(0x0000000880000000) Interleave: [8:6]XOR[18:16] reg=0x040087c1
[ 12.137651] EDAC DEBUG: get_memory_layout: SAD#0, interleave #0: 0
[ 12.137653] EDAC DEBUG: get_memory_layout: SAD#1 DRAM up to 66.000 GB
(0x0000001080000000) Interleave: [8:6]XOR[18:16] reg=0x040107c1
[ 12.137655] EDAC DEBUG: get_memory_layout: SAD#1, interleave #0: 1
[ 12.137664] EDAC DEBUG: get_memory_layout: TAD#0: up to 66.000 GB
(0x0000001080000000), socket interleave 2, memory interleave 2, TGT: 0,
1, 0, 0, reg=0x0041f504
[ 12.137668] EDAC DEBUG: get_memory_layout: TAD CH#0, offset #0:
34.000 GB (0x0000000880000000), reg=0x00008800
[ 12.137670] EDAC DEBUG: get_memory_layout: TAD CH#1, offset #0:
34.000 GB (0x0000000880000000), reg=0x00008800
[ 12.137672] EDAC DEBUG: get_memory_layout: CH#0 RIR#0, limit: 7.999
GB (0x00000001fff00000), way: 1, reg=0x8000001e
[ 12.137674] EDAC DEBUG: get_memory_layout: CH#0 RIR#0 INTL#0, offset
0.000 GB (0x0000000000000000), tgt: 0, reg=0x00000000
[ 12.137677] EDAC DEBUG: get_memory_layout: CH#1 RIR#0, limit: 7.999
GB (0x00000001fff00000), way: 1, reg=0x8000001e
[ 12.137679] EDAC DEBUG: get_memory_layout: CH#1 RIR#0 INTL#0, offset
0.000 GB (0x0000000000000000), tgt: 0, reg=0x00000000
[ 12.137682] EDAC DEBUG: edac_mc_add_mc_with_groups:
[ 12.137707] EDAC DEBUG: edac_create_sysfs_mci_device: device mc0 created
[ 12.137725] EDAC DEBUG: edac_create_dimm_object: device dimm0 created
at location channel 0 slot 0
[ 12.137742] EDAC DEBUG: edac_create_dimm_object: device dimm3 created
at location channel 1 slot 0
[ 12.137763] EDAC DEBUG: edac_create_csrow_object: device csrow0 created
[ 12.137786] EDAC MC0: Giving out device to module sb_edac controller
Broadwell SrcID#1_Ha#0: DEV 0000:ff:12.0 (INTERRUPT)
[ 12.137788] EDAC DEBUG: sbridge_probe: Registering MC#1 (2 of 4)
[ 12.137789] EDAC DEBUG: edac_mc_alloc: allocating 2576 bytes for mci
data (18 dimms, 18 csrows/channels)
[ 12.137815] EDAC DEBUG: sbridge_register_mci: MC: mci =
0000000091cbef60, dev = 00000000b84a6b61
[ 12.137828] EDAC DEBUG: broadwell_mci_bind_devs: Associated PCI
7f.18.0 with dev = 00000000801999ca
[ 12.137830] EDAC DEBUG: broadwell_mci_bind_devs: Associated PCI
7f.19.0 with dev = 00000000d0e7bf7d
[ 12.137831] EDAC DEBUG: broadwell_mci_bind_devs: Associated PCI
7f.19.1 with dev = 00000000b906d457
[ 12.137833] EDAC DEBUG: broadwell_mci_bind_devs: Associated PCI
7f.19.2 with dev = 0000000036562947
[ 12.137834] EDAC DEBUG: broadwell_mci_bind_devs: Associated PCI
7f.19.3 with dev = 00000000add9f2e6
[ 12.137835] EDAC DEBUG: broadwell_mci_bind_devs: Associated PCI
7f.15.4 with dev = 000000001cf45910
[ 12.137836] EDAC DEBUG: broadwell_mci_bind_devs: Associated PCI
7f.15.5 with dev = 00000000e8ba5532
[ 12.137838] EDAC DEBUG: broadwell_mci_bind_devs: Associated PCI
7f.19.7 with dev = 00000000bfab36c6
[ 12.137841] EDAC DEBUG: get_dimm_config: mc#1: Node ID: 0, source ID: 0
[ 12.137843] EDAC DEBUG: get_dimm_config: Memory mirroring is disabled
[ 12.137844] EDAC DEBUG: get_dimm_config: Lockstep is disabled
[ 12.137845] EDAC DEBUG: get_dimm_config: address map is on open page mode
[ 12.137846] EDAC DEBUG: __populate_dimms: Memory is registered
[ 12.137847] EDAC DEBUG: __populate_dimms: mc#1: ha 0 channel 0, dimm
0, 8192 MiB (2097152 pages) bank: 16, rank: 1, row: 0x10000, col: 0x400
[ 12.137851] EDAC DEBUG: __populate_dimms: mc#1: ha 0 channel 1, dimm
0, 8192 MiB (2097152 pages) bank: 16, rank: 1, row: 0x10000, col: 0x400
[ 12.137855] EDAC DEBUG: get_memory_layout: TOLM: 2.000 GB
(0x000000007fffffff)
[ 12.137857] EDAC DEBUG: get_memory_layout: TOHM: 66.000 GB
(0x000000107fffffff)
[ 12.137859] EDAC DEBUG: get_memory_layout: SAD#0 DRAM up to 34.000 GB
(0x0000000880000000) Interleave: [8:6]XOR[18:16] reg=0x040087c1
[ 12.137861] EDAC DEBUG: get_memory_layout: SAD#0, interleave #0: 0
[ 12.137862] EDAC DEBUG: get_memory_layout: SAD#1 DRAM up to 66.000 GB
(0x0000001080000000) Interleave: [8:6]XOR[18:16] reg=0x040107c1
[ 12.137864] EDAC DEBUG: get_memory_layout: SAD#1, interleave #0: 1
[ 12.137872] EDAC DEBUG: get_memory_layout: TAD#0: up to 2.000 GB
(0x0000000080000000), socket interleave 2, memory interleave 2, TGT: 0,
1, 0, 0, reg=0x0001f504
[ 12.137875] EDAC DEBUG: get_memory_layout: TAD#1: up to 34.000 GB
(0x0000000880000000), socket interleave 2, memory interleave 2, TGT: 0,
1, 0, 0, reg=0x0021f504
[ 12.137878] EDAC DEBUG: get_memory_layout: TAD CH#0, offset #0: 0.000
GB (0x0000000000000000), reg=0x00000000
[ 12.137880] EDAC DEBUG: get_memory_layout: TAD CH#0, offset #1: 2.000
GB (0x0000000080000000), reg=0x00000800
[ 12.137882] EDAC DEBUG: get_memory_layout: TAD CH#1, offset #0: 0.000
GB (0x0000000000000000), reg=0x00000000
[ 12.137883] EDAC DEBUG: get_memory_layout: TAD CH#1, offset #1: 2.000
GB (0x0000000080000000), reg=0x00000800
[ 12.137885] EDAC DEBUG: get_memory_layout: CH#0 RIR#0, limit: 7.999
GB (0x00000001fff00000), way: 1, reg=0x8000001e
[ 12.137887] EDAC DEBUG: get_memory_layout: CH#0 RIR#0 INTL#0, offset
0.000 GB (0x0000000000000000), tgt: 0, reg=0x00000000
[ 12.137890] EDAC DEBUG: get_memory_layout: CH#1 RIR#0, limit: 7.999
GB (0x00000001fff00000), way: 1, reg=0x8000001e
[ 12.137891] EDAC DEBUG: get_memory_layout: CH#1 RIR#0 INTL#0, offset
0.000 GB (0x0000000000000000), tgt: 0, reg=0x00000000
[ 12.137893] EDAC DEBUG: edac_mc_add_mc_with_groups:
[ 12.137911] EDAC DEBUG: edac_create_sysfs_mci_device: device mc1 created
[ 12.137927] EDAC DEBUG: edac_create_dimm_object: device dimm0 created
at location channel 0 slot 0
[ 12.137944] EDAC DEBUG: edac_create_dimm_object: device dimm3 created
at location channel 1 slot 0
[ 12.137962] EDAC DEBUG: edac_create_csrow_object: device csrow0 created
[ 12.137979] EDAC MC1: Giving out device to module sb_edac controller
Broadwell SrcID#0_Ha#0: DEV 0000:7f:12.0 (INTERRUPT)
[ 12.137980] EDAC DEBUG: sbridge_probe: Registering MC#2 (3 of 4)
[ 12.137981] EDAC DEBUG: edac_mc_alloc: allocating 2576 bytes for mci
data (18 dimms, 18 csrows/channels)
[ 12.138008] EDAC DEBUG: sbridge_register_mci: MC: mci =
00000000607198d6, dev = 0000000072410c50
[ 12.138020] EDAC DEBUG: broadwell_mci_bind_devs: Associated PCI
ff.18.4 with dev = 000000005abb1f2f
[ 12.138022] EDAC DEBUG: broadwell_mci_bind_devs: Associated PCI
ff.22.0 with dev = 00000000029b2d9f
[ 12.138024] EDAC DEBUG: broadwell_mci_bind_devs: Associated PCI
ff.22.1 with dev = 000000004197abd0
[ 12.138025] EDAC DEBUG: broadwell_mci_bind_devs: Associated PCI
ff.22.2 with dev = 000000009ee0e59d
[ 12.138026] EDAC DEBUG: broadwell_mci_bind_devs: Associated PCI
ff.22.3 with dev = 00000000fcf12a35
[ 12.138027] EDAC DEBUG: broadwell_mci_bind_devs: Associated PCI
ff.15.4 with dev = 00000000194d215e
[ 12.138028] EDAC DEBUG: broadwell_mci_bind_devs: Associated PCI
ff.15.5 with dev = 000000000c521c04
[ 12.138030] EDAC DEBUG: broadwell_mci_bind_devs: Associated PCI
ff.19.7 with dev = 000000003f33f221
[ 12.138032] EDAC DEBUG: get_dimm_config: mc#2: Node ID: 1, source ID: 1
[ 12.138034] EDAC DEBUG: get_dimm_config: Memory mirroring is disabled
[ 12.138036] EDAC DEBUG: get_dimm_config: Lockstep is disabled
[ 12.138036] EDAC DEBUG: get_dimm_config: address map is on open page mode
[ 12.138038] EDAC DEBUG: __populate_dimms: Memory is registered
[ 12.138039] EDAC DEBUG: __populate_dimms: mc#2: ha 1 channel 0, dimm
0, 8192 MiB (2097152 pages) bank: 16, rank: 1, row: 0x10000, col: 0x400
[ 12.138044] EDAC DEBUG: __populate_dimms: mc#2: ha 1 channel 1, dimm
0, 8192 MiB (2097152 pages) bank: 16, rank: 1, row: 0x10000, col: 0x400
[ 12.138047] EDAC DEBUG: get_memory_layout: TOLM: 2.000 GB
(0x000000007fffffff)
[ 12.138049] EDAC DEBUG: get_memory_layout: TOHM: 66.000 GB
(0x000000107fffffff)
[ 12.138051] EDAC DEBUG: get_memory_layout: SAD#0 DRAM up to 34.000 GB
(0x0000000880000000) Interleave: [8:6]XOR[18:16] reg=0x040087c1
[ 12.138053] EDAC DEBUG: get_memory_layout: SAD#0, interleave #0: 0
[ 12.138055] EDAC DEBUG: get_memory_layout: SAD#1 DRAM up to 66.000 GB
(0x0000001080000000) Interleave: [8:6]XOR[18:16] reg=0x040107c1
[ 12.138057] EDAC DEBUG: get_memory_layout: SAD#1, interleave #0: 1
[ 12.138066] EDAC DEBUG: get_memory_layout: TAD#0: up to 66.000 GB
(0x0000001080000000), socket interleave 2, memory interleave 2, TGT: 0,
1, 0, 0, reg=0x0041f504
[ 12.138069] EDAC DEBUG: get_memory_layout: TAD CH#0, offset #0:
34.000 GB (0x0000000880000000), reg=0x00008800
[ 12.138071] EDAC DEBUG: get_memory_layout: TAD CH#1, offset #0:
34.000 GB (0x0000000880000000), reg=0x00008800
[ 12.138073] EDAC DEBUG: get_memory_layout: CH#0 RIR#0, limit: 7.999
GB (0x00000001fff00000), way: 1, reg=0x8000001e
[ 12.138075] EDAC DEBUG: get_memory_layout: CH#0 RIR#0 INTL#0, offset
0.000 GB (0x0000000000000000), tgt: 0, reg=0x00000000
[ 12.138078] EDAC DEBUG: get_memory_layout: CH#1 RIR#0, limit: 7.999
GB (0x00000001fff00000), way: 1, reg=0x8000001e
[ 12.138079] EDAC DEBUG: get_memory_layout: CH#1 RIR#0 INTL#0, offset
0.000 GB (0x0000000000000000), tgt: 0, reg=0x00000000
[ 12.138082] EDAC DEBUG: edac_mc_add_mc_with_groups:
[ 12.138098] EDAC DEBUG: edac_create_sysfs_mci_device: device mc2 created
[ 12.138115] EDAC DEBUG: edac_create_dimm_object: device dimm0 created
at location channel 0 slot 0
[ 12.138132] EDAC DEBUG: edac_create_dimm_object: device dimm3 created
at location channel 1 slot 0
[ 12.138150] EDAC DEBUG: edac_create_csrow_object: device csrow0 created
[ 12.138166] EDAC MC2: Giving out device to module sb_edac controller
Broadwell SrcID#1_Ha#1: DEV 0000:ff:12.4 (INTERRUPT)
[ 12.138168] EDAC DEBUG: sbridge_probe: Registering MC#3 (4 of 4)
[ 12.138168] EDAC DEBUG: edac_mc_alloc: allocating 2576 bytes for mci
data (18 dimms, 18 csrows/channels)
[ 12.138195] EDAC DEBUG: sbridge_register_mci: MC: mci =
0000000096c9948f, dev = 000000006f8c6147
[ 12.138208] EDAC DEBUG: broadwell_mci_bind_devs: Associated PCI
7f.18.4 with dev = 000000000ff194e3
[ 12.138209] EDAC DEBUG: broadwell_mci_bind_devs: Associated PCI
7f.22.0 with dev = 00000000103440bb
[ 12.138211] EDAC DEBUG: broadwell_mci_bind_devs: Associated PCI
7f.22.1 with dev = 00000000f3a7e986
[ 12.138212] EDAC DEBUG: broadwell_mci_bind_devs: Associated PCI
7f.22.2 with dev = 000000006c0c63fd
[ 12.138213] EDAC DEBUG: broadwell_mci_bind_devs: Associated PCI
7f.22.3 with dev = 00000000b3c11ca1
[ 12.138214] EDAC DEBUG: broadwell_mci_bind_devs: Associated PCI
7f.15.4 with dev = 000000001cf45910
[ 12.138215] EDAC DEBUG: broadwell_mci_bind_devs: Associated PCI
7f.15.5 with dev = 00000000e8ba5532
[ 12.138216] EDAC DEBUG: broadwell_mci_bind_devs: Associated PCI
7f.19.7 with dev = 00000000bfab36c6
[ 12.138219] EDAC DEBUG: get_dimm_config: mc#3: Node ID: 0, source ID: 0
[ 12.138221] EDAC DEBUG: get_dimm_config: Memory mirroring is disabled
[ 12.138222] EDAC DEBUG: get_dimm_config: Lockstep is disabled
[ 12.138223] EDAC DEBUG: get_dimm_config: address map is on open page mode
[ 12.138224] EDAC DEBUG: __populate_dimms: Memory is registered
[ 12.138225] EDAC DEBUG: __populate_dimms: mc#3: ha 1 channel 0, dimm
0, 8192 MiB (2097152 pages) bank: 16, rank: 1, row: 0x10000, col: 0x400
[ 12.138229] EDAC DEBUG: __populate_dimms: mc#3: ha 1 channel 1, dimm
0, 8192 MiB (2097152 pages) bank: 16, rank: 1, row: 0x10000, col: 0x400
[ 12.138233] EDAC DEBUG: get_memory_layout: TOLM: 2.000 GB
(0x000000007fffffff)
[ 12.138235] EDAC DEBUG: get_memory_layout: TOHM: 66.000 GB
(0x000000107fffffff)
[ 12.138237] EDAC DEBUG: get_memory_layout: SAD#0 DRAM up to 34.000 GB
(0x0000000880000000) Interleave: [8:6]XOR[18:16] reg=0x040087c1
[ 12.138239] EDAC DEBUG: get_memory_layout: SAD#0, interleave #0: 0
[ 12.138240] EDAC DEBUG: get_memory_layout: SAD#1 DRAM up to 66.000 GB
(0x0000001080000000) Interleave: [8:6]XOR[18:16] reg=0x040107c1
[ 12.138242] EDAC DEBUG: get_memory_layout: SAD#1, interleave #0: 1
[ 12.138250] EDAC DEBUG: get_memory_layout: TAD#0: up to 2.000 GB
(0x0000000080000000), socket interleave 2, memory interleave 2, TGT: 0,
1, 0, 0, reg=0x0001f504
[ 12.138253] EDAC DEBUG: get_memory_layout: TAD#1: up to 34.000 GB
(0x0000000880000000), socket interleave 2, memory interleave 2, TGT: 0,
1, 0, 0, reg=0x0021f504
[ 12.138256] EDAC DEBUG: get_memory_layout: TAD CH#0, offset #0: 0.000
GB (0x0000000000000000), reg=0x00000000
[ 12.138258] EDAC DEBUG: get_memory_layout: TAD CH#0, offset #1: 2.000
GB (0x0000000080000000), reg=0x00000800
[ 12.138260] EDAC DEBUG: get_memory_layout: TAD CH#1, offset #0: 0.000
GB (0x0000000000000000), reg=0x00000000
[ 12.138262] EDAC DEBUG: get_memory_layout: TAD CH#1, offset #1: 2.000
GB (0x0000000080000000), reg=0x00000800
[ 12.138263] EDAC DEBUG: get_memory_layout: CH#0 RIR#0, limit: 7.999
GB (0x00000001fff00000), way: 1, reg=0x8000001e
[ 12.138265] EDAC DEBUG: get_memory_layout: CH#0 RIR#0 INTL#0, offset
0.000 GB (0x0000000000000000), tgt: 0, reg=0x00000000
[ 12.138268] EDAC DEBUG: get_memory_layout: CH#1 RIR#0, limit: 7.999
GB (0x00000001fff00000), way: 1, reg=0x8000001e
[ 12.138269] EDAC DEBUG: get_memory_layout: CH#1 RIR#0 INTL#0, offset
0.000 GB (0x0000000000000000), tgt: 0, reg=0x00000000
[ 12.138271] EDAC DEBUG: edac_mc_add_mc_with_groups:
[ 12.138289] EDAC DEBUG: edac_create_sysfs_mci_device: device mc3 created
[ 12.138305] EDAC DEBUG: edac_create_dimm_object: device dimm0 created
at location channel 0 slot 0
[ 12.138321] EDAC DEBUG: edac_create_dimm_object: device dimm3 created
at location channel 1 slot 0
[ 12.138339] EDAC DEBUG: edac_create_csrow_object: device csrow0 created
[ 12.138355] EDAC MC3: Giving out device to module sb_edac controller
Broadwell SrcID#0_Ha#1: DEV 0000:7f:12.4 (INTERRUPT)
[ 12.138357] EDAC sbridge: Ver: 1.1.2
[ 12.156424] intel_rapl_common: Found RAPL domain package
[ 12.156430] intel_rapl_common: Found RAPL domain dram
[ 12.156435] intel_rapl_common: DRAM domain energy unit 15300pj
[ 12.156822] intel_rapl_common: Found RAPL domain package
[ 12.156828] intel_rapl_common: Found RAPL domain dram
[ 12.156832] intel_rapl_common: DRAM domain energy unit 15300pj
[ 12.242383] EXT4-fs (sda1): mounted filesystem with ordered data
mode. Opts: (null). Quota mode: disabled.
[ 12.782106] cfg80211: Loading compiled-in X.509 certificates for
regulatory database
[ 12.790880] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 12.791172] cfg80211: Loaded X.509 cert 'wens:
61c038651aabdcf94bd0ac7ff06c7248db18c600'
[ 13.093265] 8021q: 802.1Q VLAN Support v1.8
[ 13.093280] 8021q: adding VLAN 0 to HW filter on device eth0
[ 13.618006] pps pps1: new PPS source ptp1
[ 13.618059] ixgbe 0000:03:00.1: registered PHC device on eth1
[ 13.739828] 8021q: adding VLAN 0 to HW filter on device eth1
[ 15.731878] bridge: filtering via arp/ip/ip6tables is no longer
available by default. Update your scripts to load br_netfilter if you
need this.
[ 135.311326] mce: Triggering MCE exception on CPU 0
[ 135.311467] Disabling lock debugging due to kernel taint
[ 135.311526] mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 1:
b400000000000000
[ 138.144900] mce: [Hardware Error]: TSC 8b58e69ed9 ADDR 1234
[ 138.151217] mce: [Hardware Error]: PROCESSOR 0:406f0 TIME 1733378551
SOCKET 0 APIC 0 microcode 10
[ 138.161124] mce: [Hardware Error]: Run the above through 'mcelog --ascii'
[ 138.168699] mce: [Hardware Error]: Machine check: MCIP not set in MCA
handler
[ 138.176662] Kernel panic - not syncing:
[ 138.180940] Fatal machine check
[ 138.180942] CPU: 44 PID: 0 Comm: swapper/44 Tainted: G M
5.15.169-rt76-yocto-preempt-rt #1
[ 138.195124] Hardware name: Intel Corporation S2600WTT/S2600WTT, BIOS
GRRFSDP1.86B.0251.R01.1505050612 05/05/2015
[ 138.206481] Call Trace:
[ 138.209211] <NMI>
[ 138.211456] dump_stack_lvl+0x38/0x4d
[ 138.215548] dump_stack+0x10/0x16
[ 138.219247] panic+0xaa/0x2ed
[ 138.222564] mce_panic+0x175/0x340
[ 138.226364] mce_end+0x20c/0x290
[ 138.229967] do_machine_check+0x601/0x990
[ 138.234434] ? mwait_idle_with_hints.constprop.0+0x62/0xc0
[ 138.240563] raise_exception+0x39/0xa0
[ 138.244749] ? debug_smp_processor_id+0x17/0x20
[ 138.249806] ? intel_pmu_lbr_enable_all+0x1f/0x1d0
[ 138.255158] ? debug_smp_processor_id+0x17/0x20
[ 138.260215] ? intel_bts_enable_local+0x16/0x60
[ 138.265266] ? x2apic_cluster_probe+0x60/0x60
[ 138.270134] ? intel_pmu_handle_irq+0x25d/0x5a0
[ 138.275190] mce_raise_notify+0xc8/0xe0
[ 138.279472] nmi_handle+0x6f/0x170
[ 138.283261] ? mwait_idle_with_hints.constprop.0+0x62/0xc0
[ 138.289387] default_do_nmi+0x71/0x200
[ 138.293572] exc_nmi+0xfb/0x130
[ 138.297078] end_repeat_nmi+0x16/0x67
[ 138.301167] RIP: 0010:mwait_idle_with_hints.constprop.0+0x62/0xc0
[ 138.307970] Code: e2 08 75 26 48 8b 00 a9 00 00 08 00 75 1c 8b 05 14
68 74 01 85 c0 7e 07 0f 00 2d 59 cf d4 00 b9 01 00 00 00 48 89 f8 0f 01
c9 <65> 48 8b 04 25 80 ad 01 00 f0 80 60 02 df f0 83 44 24 fc 00 48 8b
[ 138.328927] RSP: 0000:ffffb39c8659be50 EFLAGS: 00000042
[ 138.334760] RAX: 0000000000000020 RBX: ffffd3947f785500 RCX:
0000000000000001
[ 138.342726] RDX: 0000000000000000 RSI: ffffffff9d7bb220 RDI:
0000000000000020
[ 138.350691] RBP: ffffb39c8659be60 R08: 00000000000067d7 R09:
0000000000000018
[ 138.358656] R10: 000000000007c9fc R11: ffff8d561f7a9064 R12:
0000000000000004
[ 138.366620] R13: ffffffff9d7bb220 R14: ffffffff9d7bb3d8 R15:
0000000000000004
[ 138.374585] ? mwait_idle_with_hints.constprop.0+0x62/0xc0
[ 138.380710] ? mwait_idle_with_hints.constprop.0+0x62/0xc0
[ 138.386836] </NMI>
[ 138.389176] <TASK>
[ 138.391517] ? intel_idle+0x1f/0x30
[ 138.395411] cpuidle_enter_state+0x92/0x3b0
[ 138.400081] cpuidle_enter+0x2e/0x50
[ 138.404071] do_idle+0x22a/0x2b0
[ 138.407676] cpu_startup_entry+0x20/0x30
[ 138.412055] start_secondary+0xf3/0x100
[ 138.416339] secondary_startup_64_no_verify+0xc2/0xcb
[ 138.421980] </TASK>
[ 139.424595] Kernel Offset: 0x1ac00000 from 0xffffffff81000000
(relocation range: 0xffffffff80000000-0xffffffffbfffffff)
[ 139.436634] Rebooting in 30 seconds..
And it seems the additional messages come from dmesg which as attached.
[ 10.935971] systemd[1]: Queued start job for default target
Multi-User System.
[snip]
[ 15.731878] bridge: filtering via arp/ip/ip6tables is no longer
available by default. Update your scripts to load br_netfilter if you
need this.
And the additional messages gone when boot without "quiet".
# mce-inject uncorrect_error
[ 1575.696135] mce: Triggering MCE exception on CPU 0
[ 1575.696217] Disabling lock debugging due to kernel taint
[ 1575.696307] mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 1:
b400000000000000
[ 1575.717191] mce: [Hardware Error]: TSC 6d26f1df1ab ADDR 1234
[ 1575.723609] mce: [Hardware Error]: PROCESSOR 0:406f0 TIME 1733384470
SOCKET 0 APIC 0 microcode 10
[ 1575.733507] mce: [Hardware Error]: Run the above through 'mcelog --ascii'
[ 1575.741085] mce: [Hardware Error]: Machine check: MCIP not set in MCA
handler
[ 1575.749051] Kernel panic - not syncing:
[ 1575.753333] Fatal machine check
[ 1575.753335] CPU: 27 PID: 0 Comm: swapper/27 Tainted: G M
5.15.169-rt76-yocto-preempt-rt #1
[ 1575.767525] Hardware name: Intel Corporation S2600WTT/S2600WTT, BIOS
GRRFSDP1.86B.0251.R01.1505050612 05/05/2015
[ 1575.778885] Call Trace:
[ 1575.781618] <NMI>
[ 1575.783865] dump_stack_lvl+0x38/0x4d
[ 1575.787960] dump_stack+0x10/0x16
[ 1575.791660] panic+0xaa/0x2ed
[ 1575.794978] mce_panic+0x175/0x340
[ 1575.798781] mce_end+0x20c/0x290
[ 1575.802385] do_machine_check+0x601/0x990
[ 1575.806862] ? mwait_idle_with_hints.constprop.0+0x62/0xc0
[ 1575.812993] raise_exception+0x39/0xa0
[ 1575.817182] ? debug_smp_processor_id+0x17/0x20
[ 1575.822240] ? intel_pmu_lbr_enable_all+0x1f/0x1d0
[ 1575.827594] ? debug_smp_processor_id+0x17/0x20
[ 1575.832652] ? intel_bts_enable_local+0x16/0x60
[ 1575.837712] ? x2apic_cluster_probe+0x60/0x60
[ 1575.842578] ? intel_pmu_handle_irq+0x25d/0x5a0
[ 1575.847631] mce_raise_notify+0xc8/0xe0
[ 1575.851915] nmi_handle+0x6f/0x170
[ 1575.855714] ? mwait_idle_with_hints.constprop.0+0x62/0xc0
[ 1575.861839] default_do_nmi+0x71/0x200
[ 1575.866024] exc_nmi+0xfb/0x130
[ 1575.869533] end_repeat_nmi+0x16/0x67
[ 1575.873624] RIP: 0010:mwait_idle_with_hints.constprop.0+0x62/0xc0
[ 1575.880431] Code: e2 08 75 26 48 8b 00 a9 00 00 08 00 75 1c 8b 05 14
68 74 01 85 c0 7e 07 0f 00 2d 59 cf d4 00 b9 01 00 00 00 48 89 f8 0f 01
c9 <65> 48 8b 04 25 80 ad 01 00 f0 80 60 02 df f0 83 44 24 fc 00 48 8b
[ 1575.901391] RSP: 0018:ffff915786513e50 EFLAGS: 00000042
[ 1575.907224] RAX: 0000000000000001 RBX: ffffb1577f345500 RCX:
0000000000000001
[ 1575.915182] RDX: 0000000000000000 RSI: ffffffff86fbb220 RDI:
0000000000000001
[ 1575.923140] RBP: ffff915786513e60 R08: 00000000000e279b R09:
0000000000000018
[ 1575.931107] R10: 000000000000033a R11: ffff89c65f369064 R12:
0000000000000002
[ 1575.939075] R13: ffffffff86fbb220 R14: ffffffff86fbb308 R15:
0000000000000002
[ 1575.947044] ? mwait_idle_with_hints.constprop.0+0x62/0xc0
[ 1575.953171] ? mwait_idle_with_hints.constprop.0+0x62/0xc0
[ 1575.959297] </NMI>
[ 1575.961637] <TASK>
[ 1575.963978] ? intel_idle+0x1f/0x30
[ 1575.967875] cpuidle_enter_state+0x92/0x3b0
[ 1575.972549] cpuidle_enter+0x2e/0x50
[ 1575.976542] do_idle+0x22a/0x2b0
[ 1575.980148] cpu_startup_entry+0x20/0x30
[ 1575.984530] start_secondary+0xf3/0x100
[ 1575.988818] secondary_startup_64_no_verify+0xc2/0xcb
[ 1575.994461] </TASK>
[ 1576.997061] Kernel Offset: 0x4400000 from 0xffffffff81000000
(relocation range: 0xffffffff80000000-0xffffffffbfffffff)
[ 1577.009003] Rebooting in 30 seconds..
Thanks,
Mingli
>
> to get timestamps on each line of console output.
>
> -Tony
>
[-- Attachment #2: dmesg --]
[-- Type: text/plain, Size: 106395 bytes --]
[ 0.000000] Linux version 5.15.169-rt76-yocto-preempt-rt (oe-user@oe-host) (x86_64-wrs-linux-gcc (GCC) 11.5.0, GNU ld (GNU Binutils) 2.38.20220708) #1 SMP PREEMPT_RT Mon Oct 28 03:25:27 UTC 2024
[ 0.000000] Command line: console=ttyS0,115200 root=/dev/sda1 rw ip=dhcp quiet
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Hygon HygonGenuine
[ 0.000000] Centaur CentaurHauls
[ 0.000000] zhaoxin Shanghai
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000775f0fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000775f1000-0x0000000077671fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000077672000-0x0000000078c82fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000078c83000-0x000000007ac32fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007ac33000-0x000000007b662fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007b663000-0x000000007b7d2fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007b7d3000-0x000000007b7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007b800000-0x000000008fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000107fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Intel Corporation S2600WTT/S2600WTT, BIOS GRRFSDP1.86B.0251.R01.1505050612 05/05/2015
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2095.085 MHz processor
[ 0.000958] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000961] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000969] last_pfn = 0x1080000 max_arch_pfn = 0x400000000
[ 0.001165] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.002103] last_pfn = 0x7b800 max_arch_pfn = 0x400000000
[ 0.012150] found SMP MP-table at [mem 0x000fd710-0x000fd71f]
[ 0.012164] Using GB pages for direct mapping
[ 0.012465] ACPI: Early table checksum verification disabled
[ 0.012468] ACPI: RSDP 0x00000000000F0540 000024 (v02 INTEL )
[ 0.012473] ACPI: XSDT 0x000000007B7D10E8 0000AC (v01 INTEL INTEL ID 00000000 INTL 01000013)
[ 0.012479] ACPI: FACP 0x000000007B7D0000 0000F4 (v04 INTEL INTEL ID 00000000 INTL 20091013)
[ 0.012484] ACPI: DSDT 0x000000007B792000 033893 (v02 INTEL INTEL ID 00000003 INTL 20091013)
[ 0.012487] ACPI: FACS 0x000000007B65F000 000040
[ 0.012490] ACPI: UEFI 0x000000007B657000 000042 (v01 INTEL EDK2 00000002 INTL 01000013)
[ 0.012493] ACPI: HPET 0x000000007B7CF000 000038 (v01 INTEL INTEL ID 00000001 INTL 20091013)
[ 0.012496] ACPI: APIC 0x000000007B7CE000 000AFC (v02 INTEL INTEL ID 00000000 INTL 20091013)
[ 0.012500] ACPI: MCFG 0x000000007B7CD000 00003C (v01 INTEL INTEL ID 00000001 INTL 20091013)
[ 0.012503] ACPI: MIGT 0x000000007B7CC000 000040 (v01 INTEL INTEL ID 00000000 INTL 20091013)
[ 0.012506] ACPI: MSCT 0x000000007B7CB000 000090 (v01 INTEL INTEL ID 00000001 INTL 20091013)
[ 0.012509] ACPI: SLIT 0x000000007B7CA000 00006C (v01 INTEL INTEL ID 00000001 INTL 20091013)
[ 0.012512] ACPI: SRAT 0x000000007B7C8000 001130 (v03 INTEL INTEL ID 00000001 INTL 20091013)
[ 0.012515] ACPI: SVOS 0x000000007B7C7000 000032 (v01 INTEL INTEL ID 00000000 INTL 20091013)
[ 0.012518] ACPI: WDDT 0x000000007B7C6000 000040 (v01 INTEL INTEL ID 00000000 INTL 20091013)
[ 0.012522] ACPI: SSDT 0x000000007B690000 101EE9 (v02 INTEL SSDT PM 00004000 INTL 20130328)
[ 0.012525] ACPI: SSDT 0x000000007B68D000 00281A (v02 INTEL SpsNm 00000002 INTL 20130328)
[ 0.012528] ACPI: SSDT 0x000000007B68C000 000064 (v02 INTEL SpsNvs 00000002 INTL 20130328)
[ 0.012531] ACPI: PRAD 0x000000007B68B000 000102 (v02 INTEL SpsPrAgg 00000002 INTL 20130328)
[ 0.012534] ACPI: SPCR 0x000000007B68A000 000050 (v01 00000000 00000000)
[ 0.012537] ACPI: DMAR 0x000000007B689000 000098 (v01 INTEL INTEL ID 00000001 INTL 20091013)
[ 0.012540] ACPI: Reserving FACP table memory at [mem 0x7b7d0000-0x7b7d00f3]
[ 0.012542] ACPI: Reserving DSDT table memory at [mem 0x7b792000-0x7b7c5892]
[ 0.012543] ACPI: Reserving FACS table memory at [mem 0x7b65f000-0x7b65f03f]
[ 0.012544] ACPI: Reserving UEFI table memory at [mem 0x7b657000-0x7b657041]
[ 0.012544] ACPI: Reserving HPET table memory at [mem 0x7b7cf000-0x7b7cf037]
[ 0.012545] ACPI: Reserving APIC table memory at [mem 0x7b7ce000-0x7b7ceafb]
[ 0.012546] ACPI: Reserving MCFG table memory at [mem 0x7b7cd000-0x7b7cd03b]
[ 0.012547] ACPI: Reserving MIGT table memory at [mem 0x7b7cc000-0x7b7cc03f]
[ 0.012548] ACPI: Reserving MSCT table memory at [mem 0x7b7cb000-0x7b7cb08f]
[ 0.012549] ACPI: Reserving SLIT table memory at [mem 0x7b7ca000-0x7b7ca06b]
[ 0.012549] ACPI: Reserving SRAT table memory at [mem 0x7b7c8000-0x7b7c912f]
[ 0.012550] ACPI: Reserving SVOS table memory at [mem 0x7b7c7000-0x7b7c7031]
[ 0.012551] ACPI: Reserving WDDT table memory at [mem 0x7b7c6000-0x7b7c603f]
[ 0.012552] ACPI: Reserving SSDT table memory at [mem 0x7b690000-0x7b791ee8]
[ 0.012553] ACPI: Reserving SSDT table memory at [mem 0x7b68d000-0x7b68f819]
[ 0.012554] ACPI: Reserving SSDT table memory at [mem 0x7b68c000-0x7b68c063]
[ 0.012555] ACPI: Reserving PRAD table memory at [mem 0x7b68b000-0x7b68b101]
[ 0.012556] ACPI: Reserving SPCR table memory at [mem 0x7b68a000-0x7b68a04f]
[ 0.012556] ACPI: Reserving DMAR table memory at [mem 0x7b689000-0x7b689097]
[ 0.012578] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[ 0.012579] SRAT: PXM 0 -> APIC 0x02 -> Node 0
[ 0.012580] SRAT: PXM 0 -> APIC 0x04 -> Node 0
[ 0.012581] SRAT: PXM 0 -> APIC 0x06 -> Node 0
[ 0.012581] SRAT: PXM 0 -> APIC 0x08 -> Node 0
[ 0.012582] SRAT: PXM 0 -> APIC 0x0a -> Node 0
[ 0.012582] SRAT: PXM 0 -> APIC 0x10 -> Node 0
[ 0.012583] SRAT: PXM 0 -> APIC 0x12 -> Node 0
[ 0.012584] SRAT: PXM 0 -> APIC 0x14 -> Node 0
[ 0.012585] SRAT: PXM 0 -> APIC 0x16 -> Node 0
[ 0.012585] SRAT: PXM 0 -> APIC 0x18 -> Node 0
[ 0.012586] SRAT: PXM 0 -> APIC 0x20 -> Node 0
[ 0.012587] SRAT: PXM 0 -> APIC 0x22 -> Node 0
[ 0.012587] SRAT: PXM 0 -> APIC 0x24 -> Node 0
[ 0.012588] SRAT: PXM 0 -> APIC 0x26 -> Node 0
[ 0.012588] SRAT: PXM 0 -> APIC 0x28 -> Node 0
[ 0.012589] SRAT: PXM 0 -> APIC 0x2a -> Node 0
[ 0.012590] SRAT: PXM 0 -> APIC 0x30 -> Node 0
[ 0.012590] SRAT: PXM 0 -> APIC 0x32 -> Node 0
[ 0.012591] SRAT: PXM 0 -> APIC 0x34 -> Node 0
[ 0.012592] SRAT: PXM 0 -> APIC 0x36 -> Node 0
[ 0.012592] SRAT: PXM 0 -> APIC 0x38 -> Node 0
[ 0.012593] SRAT: PXM 1 -> APIC 0x40 -> Node 1
[ 0.012594] SRAT: PXM 1 -> APIC 0x42 -> Node 1
[ 0.012594] SRAT: PXM 1 -> APIC 0x44 -> Node 1
[ 0.012595] SRAT: PXM 1 -> APIC 0x46 -> Node 1
[ 0.012596] SRAT: PXM 1 -> APIC 0x48 -> Node 1
[ 0.012596] SRAT: PXM 1 -> APIC 0x4a -> Node 1
[ 0.012597] SRAT: PXM 1 -> APIC 0x50 -> Node 1
[ 0.012598] SRAT: PXM 1 -> APIC 0x52 -> Node 1
[ 0.012598] SRAT: PXM 1 -> APIC 0x54 -> Node 1
[ 0.012599] SRAT: PXM 1 -> APIC 0x56 -> Node 1
[ 0.012600] SRAT: PXM 1 -> APIC 0x58 -> Node 1
[ 0.012600] SRAT: PXM 1 -> APIC 0x60 -> Node 1
[ 0.012601] SRAT: PXM 1 -> APIC 0x62 -> Node 1
[ 0.012602] SRAT: PXM 1 -> APIC 0x64 -> Node 1
[ 0.012602] SRAT: PXM 1 -> APIC 0x66 -> Node 1
[ 0.012603] SRAT: PXM 1 -> APIC 0x68 -> Node 1
[ 0.012604] SRAT: PXM 1 -> APIC 0x6a -> Node 1
[ 0.012604] SRAT: PXM 1 -> APIC 0x70 -> Node 1
[ 0.012605] SRAT: PXM 1 -> APIC 0x72 -> Node 1
[ 0.012605] SRAT: PXM 1 -> APIC 0x74 -> Node 1
[ 0.012606] SRAT: PXM 1 -> APIC 0x76 -> Node 1
[ 0.012607] SRAT: PXM 1 -> APIC 0x78 -> Node 1
[ 0.012607] SRAT: PXM 0 -> APIC 0x01 -> Node 0
[ 0.012608] SRAT: PXM 0 -> APIC 0x03 -> Node 0
[ 0.012609] SRAT: PXM 0 -> APIC 0x05 -> Node 0
[ 0.012609] SRAT: PXM 0 -> APIC 0x07 -> Node 0
[ 0.012610] SRAT: PXM 0 -> APIC 0x09 -> Node 0
[ 0.012611] SRAT: PXM 0 -> APIC 0x0b -> Node 0
[ 0.012611] SRAT: PXM 0 -> APIC 0x11 -> Node 0
[ 0.012612] SRAT: PXM 0 -> APIC 0x13 -> Node 0
[ 0.012613] SRAT: PXM 0 -> APIC 0x15 -> Node 0
[ 0.012613] SRAT: PXM 0 -> APIC 0x17 -> Node 0
[ 0.012614] SRAT: PXM 0 -> APIC 0x19 -> Node 0
[ 0.012615] SRAT: PXM 0 -> APIC 0x21 -> Node 0
[ 0.012615] SRAT: PXM 0 -> APIC 0x23 -> Node 0
[ 0.012616] SRAT: PXM 0 -> APIC 0x25 -> Node 0
[ 0.012617] SRAT: PXM 0 -> APIC 0x27 -> Node 0
[ 0.012617] SRAT: PXM 0 -> APIC 0x29 -> Node 0
[ 0.012618] SRAT: PXM 0 -> APIC 0x2b -> Node 0
[ 0.012618] SRAT: PXM 0 -> APIC 0x31 -> Node 0
[ 0.012619] SRAT: PXM 0 -> APIC 0x33 -> Node 0
[ 0.012620] SRAT: PXM 0 -> APIC 0x35 -> Node 0
[ 0.012620] SRAT: PXM 0 -> APIC 0x37 -> Node 0
[ 0.012621] SRAT: PXM 0 -> APIC 0x39 -> Node 0
[ 0.012622] SRAT: PXM 1 -> APIC 0x41 -> Node 1
[ 0.012622] SRAT: PXM 1 -> APIC 0x43 -> Node 1
[ 0.012623] SRAT: PXM 1 -> APIC 0x45 -> Node 1
[ 0.012624] SRAT: PXM 1 -> APIC 0x47 -> Node 1
[ 0.012624] SRAT: PXM 1 -> APIC 0x49 -> Node 1
[ 0.012625] SRAT: PXM 1 -> APIC 0x4b -> Node 1
[ 0.012626] SRAT: PXM 1 -> APIC 0x51 -> Node 1
[ 0.012626] SRAT: PXM 1 -> APIC 0x53 -> Node 1
[ 0.012627] SRAT: PXM 1 -> APIC 0x55 -> Node 1
[ 0.012628] SRAT: PXM 1 -> APIC 0x57 -> Node 1
[ 0.012628] SRAT: PXM 1 -> APIC 0x59 -> Node 1
[ 0.012629] SRAT: PXM 1 -> APIC 0x61 -> Node 1
[ 0.012629] SRAT: PXM 1 -> APIC 0x63 -> Node 1
[ 0.012630] SRAT: PXM 1 -> APIC 0x65 -> Node 1
[ 0.012631] SRAT: PXM 1 -> APIC 0x67 -> Node 1
[ 0.012631] SRAT: PXM 1 -> APIC 0x69 -> Node 1
[ 0.012632] SRAT: PXM 1 -> APIC 0x6b -> Node 1
[ 0.012633] SRAT: PXM 1 -> APIC 0x71 -> Node 1
[ 0.012633] SRAT: PXM 1 -> APIC 0x73 -> Node 1
[ 0.012634] SRAT: PXM 1 -> APIC 0x75 -> Node 1
[ 0.012635] SRAT: PXM 1 -> APIC 0x77 -> Node 1
[ 0.012635] SRAT: PXM 1 -> APIC 0x79 -> Node 1
[ 0.012642] ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0x87fffffff]
[ 0.012645] ACPI: SRAT: Node 1 PXM 1 [mem 0x880000000-0x107fffffff]
[ 0.012649] NUMA: Initialized distance table, cnt=2
[ 0.012655] NODE_DATA(0) allocated [mem 0x87fffc000-0x87fffffff]
[ 0.012660] NODE_DATA(1) allocated [mem 0x107fffb000-0x107fffefff]
[ 0.012806] Zone ranges:
[ 0.012807] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.012809] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.012810] Normal [mem 0x0000000100000000-0x000000107fffffff]
[ 0.012812] Movable zone start for each node
[ 0.012813] Early memory node ranges
[ 0.012813] node 0: [mem 0x0000000000001000-0x000000000009cfff]
[ 0.012815] node 0: [mem 0x0000000000100000-0x00000000775f0fff]
[ 0.012816] node 0: [mem 0x0000000077672000-0x0000000078c82fff]
[ 0.012817] node 0: [mem 0x000000007b7d3000-0x000000007b7fffff]
[ 0.012818] node 0: [mem 0x0000000100000000-0x000000087fffffff]
[ 0.012822] node 1: [mem 0x0000000880000000-0x000000107fffffff]
[ 0.012827] Initmem setup node 0 [mem 0x0000000000001000-0x000000087fffffff]
[ 0.012830] Initmem setup node 1 [mem 0x0000000880000000-0x000000107fffffff]
[ 0.012833] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.012875] On node 0, zone DMA: 99 pages in unavailable ranges
[ 0.018118] On node 0, zone DMA32: 129 pages in unavailable ranges
[ 0.018356] On node 0, zone DMA32: 11088 pages in unavailable ranges
[ 0.103696] On node 0, zone Normal: 18432 pages in unavailable ranges
[ 0.210714] ACPI: PM-Timer IO Port: 0x408
[ 0.210745] ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1])
[ 0.210747] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
[ 0.210749] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
[ 0.210749] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
[ 0.210750] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
[ 0.210751] ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1])
[ 0.210752] ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1])
[ 0.210753] ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1])
[ 0.210754] ACPI: LAPIC_NMI (acpi_id[0x08] high level lint[0x1])
[ 0.210755] ACPI: LAPIC_NMI (acpi_id[0x09] high level lint[0x1])
[ 0.210756] ACPI: LAPIC_NMI (acpi_id[0x0a] high level lint[0x1])
[ 0.210757] ACPI: LAPIC_NMI (acpi_id[0x0b] high level lint[0x1])
[ 0.210758] ACPI: LAPIC_NMI (acpi_id[0x0c] high level lint[0x1])
[ 0.210758] ACPI: LAPIC_NMI (acpi_id[0x0d] high level lint[0x1])
[ 0.210759] ACPI: LAPIC_NMI (acpi_id[0x0e] high level lint[0x1])
[ 0.210760] ACPI: LAPIC_NMI (acpi_id[0x0f] high level lint[0x1])
[ 0.210761] ACPI: LAPIC_NMI (acpi_id[0x10] high level lint[0x1])
[ 0.210762] ACPI: LAPIC_NMI (acpi_id[0x11] high level lint[0x1])
[ 0.210762] ACPI: LAPIC_NMI (acpi_id[0x12] high level lint[0x1])
[ 0.210763] ACPI: LAPIC_NMI (acpi_id[0x13] high level lint[0x1])
[ 0.210764] ACPI: LAPIC_NMI (acpi_id[0x14] high level lint[0x1])
[ 0.210765] ACPI: LAPIC_NMI (acpi_id[0x15] high level lint[0x1])
[ 0.210765] ACPI: LAPIC_NMI (acpi_id[0x16] high level lint[0x1])
[ 0.210766] ACPI: LAPIC_NMI (acpi_id[0x17] high level lint[0x1])
[ 0.210767] ACPI: LAPIC_NMI (acpi_id[0x18] high level lint[0x1])
[ 0.210768] ACPI: LAPIC_NMI (acpi_id[0x19] high level lint[0x1])
[ 0.210768] ACPI: LAPIC_NMI (acpi_id[0x1a] high level lint[0x1])
[ 0.210769] ACPI: LAPIC_NMI (acpi_id[0x1b] high level lint[0x1])
[ 0.210770] ACPI: LAPIC_NMI (acpi_id[0x1c] high level lint[0x1])
[ 0.210770] ACPI: LAPIC_NMI (acpi_id[0x1d] high level lint[0x1])
[ 0.210771] ACPI: LAPIC_NMI (acpi_id[0x1e] high level lint[0x1])
[ 0.210772] ACPI: LAPIC_NMI (acpi_id[0x1f] high level lint[0x1])
[ 0.210773] ACPI: LAPIC_NMI (acpi_id[0x20] high level lint[0x1])
[ 0.210773] ACPI: LAPIC_NMI (acpi_id[0x21] high level lint[0x1])
[ 0.210774] ACPI: LAPIC_NMI (acpi_id[0x22] high level lint[0x1])
[ 0.210775] ACPI: LAPIC_NMI (acpi_id[0x23] high level lint[0x1])
[ 0.210776] ACPI: LAPIC_NMI (acpi_id[0x24] high level lint[0x1])
[ 0.210777] ACPI: LAPIC_NMI (acpi_id[0x25] high level lint[0x1])
[ 0.210777] ACPI: LAPIC_NMI (acpi_id[0x26] high level lint[0x1])
[ 0.210778] ACPI: LAPIC_NMI (acpi_id[0x27] high level lint[0x1])
[ 0.210779] ACPI: LAPIC_NMI (acpi_id[0x28] high level lint[0x1])
[ 0.210780] ACPI: LAPIC_NMI (acpi_id[0x29] high level lint[0x1])
[ 0.210781] ACPI: LAPIC_NMI (acpi_id[0x2a] high level lint[0x1])
[ 0.210782] ACPI: LAPIC_NMI (acpi_id[0x2b] high level lint[0x1])
[ 0.210783] ACPI: LAPIC_NMI (acpi_id[0x2c] high level lint[0x1])
[ 0.210784] ACPI: LAPIC_NMI (acpi_id[0x2d] high level lint[0x1])
[ 0.210785] ACPI: LAPIC_NMI (acpi_id[0x2e] high level lint[0x1])
[ 0.210786] ACPI: LAPIC_NMI (acpi_id[0x2f] high level lint[0x1])
[ 0.210786] ACPI: LAPIC_NMI (acpi_id[0x30] high level lint[0x1])
[ 0.210787] ACPI: LAPIC_NMI (acpi_id[0x31] high level lint[0x1])
[ 0.210788] ACPI: LAPIC_NMI (acpi_id[0x32] high level lint[0x1])
[ 0.210789] ACPI: LAPIC_NMI (acpi_id[0x33] high level lint[0x1])
[ 0.210790] ACPI: LAPIC_NMI (acpi_id[0x34] high level lint[0x1])
[ 0.210791] ACPI: LAPIC_NMI (acpi_id[0x35] high level lint[0x1])
[ 0.210792] ACPI: LAPIC_NMI (acpi_id[0x36] high level lint[0x1])
[ 0.210792] ACPI: LAPIC_NMI (acpi_id[0x37] high level lint[0x1])
[ 0.210793] ACPI: LAPIC_NMI (acpi_id[0x38] high level lint[0x1])
[ 0.210794] ACPI: LAPIC_NMI (acpi_id[0x39] high level lint[0x1])
[ 0.210795] ACPI: LAPIC_NMI (acpi_id[0x3a] high level lint[0x1])
[ 0.210795] ACPI: LAPIC_NMI (acpi_id[0x3b] high level lint[0x1])
[ 0.210796] ACPI: LAPIC_NMI (acpi_id[0x3c] high level lint[0x1])
[ 0.210797] ACPI: LAPIC_NMI (acpi_id[0x3d] high level lint[0x1])
[ 0.210797] ACPI: LAPIC_NMI (acpi_id[0x3e] high level lint[0x1])
[ 0.210798] ACPI: LAPIC_NMI (acpi_id[0x3f] high level lint[0x1])
[ 0.210799] ACPI: LAPIC_NMI (acpi_id[0x40] high level lint[0x1])
[ 0.210800] ACPI: LAPIC_NMI (acpi_id[0x41] high level lint[0x1])
[ 0.210800] ACPI: LAPIC_NMI (acpi_id[0x42] high level lint[0x1])
[ 0.210801] ACPI: LAPIC_NMI (acpi_id[0x43] high level lint[0x1])
[ 0.210802] ACPI: LAPIC_NMI (acpi_id[0x44] high level lint[0x1])
[ 0.210803] ACPI: LAPIC_NMI (acpi_id[0x45] high level lint[0x1])
[ 0.210803] ACPI: LAPIC_NMI (acpi_id[0x46] high level lint[0x1])
[ 0.210804] ACPI: LAPIC_NMI (acpi_id[0x47] high level lint[0x1])
[ 0.210805] ACPI: LAPIC_NMI (acpi_id[0x48] high level lint[0x1])
[ 0.210805] ACPI: LAPIC_NMI (acpi_id[0x49] high level lint[0x1])
[ 0.210806] ACPI: LAPIC_NMI (acpi_id[0x4a] high level lint[0x1])
[ 0.210807] ACPI: LAPIC_NMI (acpi_id[0x4b] high level lint[0x1])
[ 0.210808] ACPI: LAPIC_NMI (acpi_id[0x4c] high level lint[0x1])
[ 0.210808] ACPI: LAPIC_NMI (acpi_id[0x4d] high level lint[0x1])
[ 0.210809] ACPI: LAPIC_NMI (acpi_id[0x4e] high level lint[0x1])
[ 0.210810] ACPI: LAPIC_NMI (acpi_id[0x4f] high level lint[0x1])
[ 0.210810] ACPI: LAPIC_NMI (acpi_id[0x50] high level lint[0x1])
[ 0.210811] ACPI: LAPIC_NMI (acpi_id[0x51] high level lint[0x1])
[ 0.210812] ACPI: LAPIC_NMI (acpi_id[0x52] high level lint[0x1])
[ 0.210813] ACPI: LAPIC_NMI (acpi_id[0x53] high level lint[0x1])
[ 0.210813] ACPI: LAPIC_NMI (acpi_id[0x54] high level lint[0x1])
[ 0.210814] ACPI: LAPIC_NMI (acpi_id[0x55] high level lint[0x1])
[ 0.210815] ACPI: LAPIC_NMI (acpi_id[0x56] high level lint[0x1])
[ 0.210815] ACPI: LAPIC_NMI (acpi_id[0x57] high level lint[0x1])
[ 0.210816] ACPI: LAPIC_NMI (acpi_id[0x58] high level lint[0x1])
[ 0.210817] ACPI: LAPIC_NMI (acpi_id[0x59] high level lint[0x1])
[ 0.210818] ACPI: LAPIC_NMI (acpi_id[0x5a] high level lint[0x1])
[ 0.210818] ACPI: LAPIC_NMI (acpi_id[0x5b] high level lint[0x1])
[ 0.210819] ACPI: LAPIC_NMI (acpi_id[0x5c] high level lint[0x1])
[ 0.210820] ACPI: LAPIC_NMI (acpi_id[0x5d] high level lint[0x1])
[ 0.210821] ACPI: LAPIC_NMI (acpi_id[0x5e] high level lint[0x1])
[ 0.210822] ACPI: LAPIC_NMI (acpi_id[0x5f] high level lint[0x1])
[ 0.210823] ACPI: LAPIC_NMI (acpi_id[0x60] high level lint[0x1])
[ 0.210824] ACPI: LAPIC_NMI (acpi_id[0x61] high level lint[0x1])
[ 0.210824] ACPI: LAPIC_NMI (acpi_id[0x62] high level lint[0x1])
[ 0.210825] ACPI: LAPIC_NMI (acpi_id[0x63] high level lint[0x1])
[ 0.210826] ACPI: LAPIC_NMI (acpi_id[0x64] high level lint[0x1])
[ 0.210827] ACPI: LAPIC_NMI (acpi_id[0x65] high level lint[0x1])
[ 0.210828] ACPI: LAPIC_NMI (acpi_id[0x66] high level lint[0x1])
[ 0.210829] ACPI: LAPIC_NMI (acpi_id[0x67] high level lint[0x1])
[ 0.210830] ACPI: LAPIC_NMI (acpi_id[0x68] high level lint[0x1])
[ 0.210831] ACPI: LAPIC_NMI (acpi_id[0x69] high level lint[0x1])
[ 0.210831] ACPI: LAPIC_NMI (acpi_id[0x6a] high level lint[0x1])
[ 0.210832] ACPI: LAPIC_NMI (acpi_id[0x6b] high level lint[0x1])
[ 0.210833] ACPI: LAPIC_NMI (acpi_id[0x6c] high level lint[0x1])
[ 0.210834] ACPI: LAPIC_NMI (acpi_id[0x6d] high level lint[0x1])
[ 0.210835] ACPI: LAPIC_NMI (acpi_id[0x6e] high level lint[0x1])
[ 0.210836] ACPI: LAPIC_NMI (acpi_id[0x6f] high level lint[0x1])
[ 0.210837] ACPI: LAPIC_NMI (acpi_id[0x70] high level lint[0x1])
[ 0.210837] ACPI: LAPIC_NMI (acpi_id[0x71] high level lint[0x1])
[ 0.210838] ACPI: LAPIC_NMI (acpi_id[0x72] high level lint[0x1])
[ 0.210839] ACPI: LAPIC_NMI (acpi_id[0x73] high level lint[0x1])
[ 0.210839] ACPI: LAPIC_NMI (acpi_id[0x74] high level lint[0x1])
[ 0.210840] ACPI: LAPIC_NMI (acpi_id[0x75] high level lint[0x1])
[ 0.210841] ACPI: LAPIC_NMI (acpi_id[0x76] high level lint[0x1])
[ 0.210842] ACPI: LAPIC_NMI (acpi_id[0x77] high level lint[0x1])
[ 0.210842] ACPI: LAPIC_NMI (acpi_id[0x78] high level lint[0x1])
[ 0.210843] ACPI: LAPIC_NMI (acpi_id[0x79] high level lint[0x1])
[ 0.210844] ACPI: LAPIC_NMI (acpi_id[0x7a] high level lint[0x1])
[ 0.210845] ACPI: LAPIC_NMI (acpi_id[0x7b] high level lint[0x1])
[ 0.210845] ACPI: LAPIC_NMI (acpi_id[0x7c] high level lint[0x1])
[ 0.210846] ACPI: LAPIC_NMI (acpi_id[0x7c] high level lint[0x1])
[ 0.210847] ACPI: LAPIC_NMI (acpi_id[0x7d] high level lint[0x1])
[ 0.210847] ACPI: LAPIC_NMI (acpi_id[0x7e] high level lint[0x1])
[ 0.210848] ACPI: LAPIC_NMI (acpi_id[0x7f] high level lint[0x1])
[ 0.210849] ACPI: LAPIC_NMI (acpi_id[0x80] high level lint[0x1])
[ 0.210850] ACPI: LAPIC_NMI (acpi_id[0x81] high level lint[0x1])
[ 0.210850] ACPI: LAPIC_NMI (acpi_id[0x82] high level lint[0x1])
[ 0.210851] ACPI: LAPIC_NMI (acpi_id[0x83] high level lint[0x1])
[ 0.210852] ACPI: LAPIC_NMI (acpi_id[0x84] high level lint[0x1])
[ 0.210852] ACPI: LAPIC_NMI (acpi_id[0x85] high level lint[0x1])
[ 0.210853] ACPI: LAPIC_NMI (acpi_id[0x86] high level lint[0x1])
[ 0.210854] ACPI: LAPIC_NMI (acpi_id[0x87] high level lint[0x1])
[ 0.210855] ACPI: LAPIC_NMI (acpi_id[0x88] high level lint[0x1])
[ 0.210855] ACPI: LAPIC_NMI (acpi_id[0x89] high level lint[0x1])
[ 0.210856] ACPI: LAPIC_NMI (acpi_id[0x8a] high level lint[0x1])
[ 0.210857] ACPI: LAPIC_NMI (acpi_id[0x8b] high level lint[0x1])
[ 0.210858] ACPI: LAPIC_NMI (acpi_id[0x8c] high level lint[0x1])
[ 0.210859] ACPI: LAPIC_NMI (acpi_id[0x8d] high level lint[0x1])
[ 0.210860] ACPI: LAPIC_NMI (acpi_id[0x8f] high level lint[0x1])
[ 0.210860] ACPI: LAPIC_NMI (acpi_id[0x90] high level lint[0x1])
[ 0.210861] ACPI: LAPIC_NMI (acpi_id[0x91] high level lint[0x1])
[ 0.210862] ACPI: LAPIC_NMI (acpi_id[0x92] high level lint[0x1])
[ 0.210863] ACPI: LAPIC_NMI (acpi_id[0x93] high level lint[0x1])
[ 0.210864] ACPI: LAPIC_NMI (acpi_id[0x94] high level lint[0x1])
[ 0.210865] ACPI: LAPIC_NMI (acpi_id[0x95] high level lint[0x1])
[ 0.210865] ACPI: LAPIC_NMI (acpi_id[0x96] high level lint[0x1])
[ 0.210866] ACPI: LAPIC_NMI (acpi_id[0x97] high level lint[0x1])
[ 0.210867] ACPI: LAPIC_NMI (acpi_id[0x98] high level lint[0x1])
[ 0.210867] ACPI: LAPIC_NMI (acpi_id[0x99] high level lint[0x1])
[ 0.210868] ACPI: LAPIC_NMI (acpi_id[0x9a] high level lint[0x1])
[ 0.210869] ACPI: LAPIC_NMI (acpi_id[0x9b] high level lint[0x1])
[ 0.210870] ACPI: LAPIC_NMI (acpi_id[0x9c] high level lint[0x1])
[ 0.210870] ACPI: LAPIC_NMI (acpi_id[0x9d] high level lint[0x1])
[ 0.210871] ACPI: LAPIC_NMI (acpi_id[0x9e] high level lint[0x1])
[ 0.210872] ACPI: LAPIC_NMI (acpi_id[0x9f] high level lint[0x1])
[ 0.210872] ACPI: LAPIC_NMI (acpi_id[0xa0] high level lint[0x1])
[ 0.210873] ACPI: LAPIC_NMI (acpi_id[0xa1] high level lint[0x1])
[ 0.210874] ACPI: LAPIC_NMI (acpi_id[0xa2] high level lint[0x1])
[ 0.210875] ACPI: LAPIC_NMI (acpi_id[0xa3] high level lint[0x1])
[ 0.210876] ACPI: LAPIC_NMI (acpi_id[0xa4] high level lint[0x1])
[ 0.210876] ACPI: LAPIC_NMI (acpi_id[0xa5] high level lint[0x1])
[ 0.210877] ACPI: LAPIC_NMI (acpi_id[0xa6] high level lint[0x1])
[ 0.210878] ACPI: LAPIC_NMI (acpi_id[0xa7] high level lint[0x1])
[ 0.210879] ACPI: LAPIC_NMI (acpi_id[0xa8] high level lint[0x1])
[ 0.210880] ACPI: LAPIC_NMI (acpi_id[0xa9] high level lint[0x1])
[ 0.210881] ACPI: LAPIC_NMI (acpi_id[0xaa] high level lint[0x1])
[ 0.210882] ACPI: LAPIC_NMI (acpi_id[0xab] high level lint[0x1])
[ 0.210883] ACPI: LAPIC_NMI (acpi_id[0xac] high level lint[0x1])
[ 0.210883] ACPI: LAPIC_NMI (acpi_id[0xad] high level lint[0x1])
[ 0.210884] ACPI: LAPIC_NMI (acpi_id[0xae] high level lint[0x1])
[ 0.210885] ACPI: LAPIC_NMI (acpi_id[0xaf] high level lint[0x1])
[ 0.210886] ACPI: LAPIC_NMI (acpi_id[0xb0] high level lint[0x1])
[ 0.210887] ACPI: LAPIC_NMI (acpi_id[0xb1] high level lint[0x1])
[ 0.210887] ACPI: LAPIC_NMI (acpi_id[0xb2] high level lint[0x1])
[ 0.210888] ACPI: LAPIC_NMI (acpi_id[0xb3] high level lint[0x1])
[ 0.210889] ACPI: LAPIC_NMI (acpi_id[0xb4] high level lint[0x1])
[ 0.210890] ACPI: LAPIC_NMI (acpi_id[0xb5] high level lint[0x1])
[ 0.210890] ACPI: LAPIC_NMI (acpi_id[0xb6] high level lint[0x1])
[ 0.210891] ACPI: LAPIC_NMI (acpi_id[0xb7] high level lint[0x1])
[ 0.210892] ACPI: LAPIC_NMI (acpi_id[0xb8] high level lint[0x1])
[ 0.210893] ACPI: LAPIC_NMI (acpi_id[0xb9] high level lint[0x1])
[ 0.210893] ACPI: LAPIC_NMI (acpi_id[0xba] high level lint[0x1])
[ 0.210894] ACPI: LAPIC_NMI (acpi_id[0xbb] high level lint[0x1])
[ 0.210895] ACPI: LAPIC_NMI (acpi_id[0xbc] high level lint[0x1])
[ 0.210896] ACPI: LAPIC_NMI (acpi_id[0xbd] high level lint[0x1])
[ 0.210897] ACPI: LAPIC_NMI (acpi_id[0xbe] high level lint[0x1])
[ 0.210898] ACPI: LAPIC_NMI (acpi_id[0xbf] high level lint[0x1])
[ 0.210910] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.210916] IOAPIC[1]: apic_id 9, version 32, address 0xfec01000, GSI 24-47
[ 0.210921] IOAPIC[2]: apic_id 10, version 32, address 0xfec40000, GSI 48-71
[ 0.210926] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.210929] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.210937] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.210938] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.210944] ACPI: SPCR: SPCR table version 1
[ 0.210946] ACPI: SPCR: console: uart,io,0x3f8,115200
[ 0.210950] [Firmware Bug]: TSC_DEADLINE disabled due to Errata; please update microcode to version: 0xb000020 (or later)
[ 0.210952] smpboot: Allowing 88 CPUs, 0 hotplug CPUs
[ 0.210983] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.210985] PM: hibernation: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.210987] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.210988] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.210988] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.210990] PM: hibernation: Registered nosave memory: [mem 0x775f1000-0x77671fff]
[ 0.210992] PM: hibernation: Registered nosave memory: [mem 0x78c83000-0x7ac32fff]
[ 0.210994] PM: hibernation: Registered nosave memory: [mem 0x7ac33000-0x7b662fff]
[ 0.210994] PM: hibernation: Registered nosave memory: [mem 0x7b663000-0x7b7d2fff]
[ 0.210996] PM: hibernation: Registered nosave memory: [mem 0x7b800000-0x8fffffff]
[ 0.210998] PM: hibernation: Registered nosave memory: [mem 0x90000000-0xfed1bfff]
[ 0.210999] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.211000] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xff7fffff]
[ 0.211000] PM: hibernation: Registered nosave memory: [mem 0xff800000-0xffffffff]
[ 0.211004] [mem 0x90000000-0xfed1bfff] available for PCI devices
[ 0.211008] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.211017] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:88 nr_node_ids:2
[ 0.217751] percpu: Embedded 53 pages/cpu s177456 r8192 d31440 u262144
[ 0.217764] pcpu-alloc: s177456 r8192 d31440 u262144 alloc=1*2097152
[ 0.217767] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
[ 0.217776] pcpu-alloc: [0] 16 17 18 19 20 21 44 45 [0] 46 47 48 49 50 51 52 53
[ 0.217784] pcpu-alloc: [0] 54 55 56 57 58 59 60 61 [0] 62 63 64 65 -- -- -- --
[ 0.217791] pcpu-alloc: [1] 22 23 24 25 26 27 28 29 [1] 30 31 32 33 34 35 36 37
[ 0.217799] pcpu-alloc: [1] 38 39 40 41 42 43 66 67 [1] 68 69 70 71 72 73 74 75
[ 0.217806] pcpu-alloc: [1] 76 77 78 79 80 81 82 83 [1] 84 85 86 87 -- -- -- --
[ 0.217852] Built 2 zonelists, mobility grouping on. Total pages: 16485630
[ 0.217854] Policy zone: Normal
[ 0.217856] Kernel command line: console=ttyS0,115200 root=/dev/nfs nfsroot=128.224.165.20:/export/pxeboot/vlm-boards/22569/rootfs,tcp,v3 rw ip=dhcp usbcore.nousb quiet
[ 0.217922] printk: log_buf_len individual max cpu contribution: 4096 bytes
[ 0.217924] printk: log_buf_len total cpu_extra contributions: 356352 bytes
[ 0.217925] printk: log_buf_len min size: 131072 bytes
[ 0.218769] printk: log_buf_len: 524288 bytes
[ 0.218770] printk: early log buf free: 104192(79%)
[ 0.220369] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.475489] Memory: 65820132K/66989868K available (18447K kernel code, 2502K rwdata, 5512K rodata, 2096K init, 1368K bss, 1169476K reserved, 0K cma-reserved)
[ 0.476538] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=88, Nodes=2
[ 0.476601] Kernel/User page tables isolation: enabled
[ 0.476721] ftrace: allocating 53261 entries in 209 pages
[ 0.513928] ftrace: allocated 209 pages with 4 groups
[ 0.514623] rcu: Preemptible hierarchical RCU implementation.
[ 0.514624] rcu: RCU event tracing is enabled.
[ 0.514625] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=88.
[ 0.514627] rcu: RCU priority boosting: priority 1 delay 500 ms.
[ 0.514628] rcu: RCU_SOFTIRQ processing moved to rcuc kthreads.
[ 0.514629] No expedited grace period (rcu_normal_after_boot).
[ 0.514630] Trampoline variant of Tasks RCU enabled.
[ 0.514630] Rude variant of Tasks RCU enabled.
[ 0.514631] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[ 0.514632] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=88
[ 0.522251] NR_IRQS: 33024, nr_irqs: 1944, preallocated irqs: 16
[ 0.522641] random: crng init done
[ 0.524943] Console: colour VGA+ 80x25
[ 0.524971] printk: console [ttyS0] enabled
[ 0.525184] ACPI: Core revision 20210730
[ 0.526149] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.526164] APIC: Switch to symmetric I/O mode setup
[ 0.526166] DMAR: Host address width 46
[ 0.526167] DMAR: DRHD base: 0x000000fbffc000 flags: 0x0
[ 0.526174] DMAR: dmar0: reg_base_addr fbffc000 ver 1:0 cap 8d2078c106f0466 ecap f020df
[ 0.526178] DMAR: DRHD base: 0x000000c7ffc000 flags: 0x1
[ 0.526183] DMAR: dmar1: reg_base_addr c7ffc000 ver 1:0 cap 8d2078c106f0466 ecap f020df
[ 0.526185] DMAR: RMRR base: 0x0000007954d000 end: 0x0000007954ffff
[ 0.526189] DMAR-IR: IOAPIC id 10 under DRHD base 0xfbffc000 IOMMU 0
[ 0.526191] DMAR-IR: IOAPIC id 8 under DRHD base 0xc7ffc000 IOMMU 1
[ 0.526193] DMAR-IR: IOAPIC id 9 under DRHD base 0xc7ffc000 IOMMU 1
[ 0.526194] DMAR-IR: HPET id 0 under DRHD base 0xc7ffc000
[ 0.526195] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.527148] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.527150] x2apic enabled
[ 0.527156] Switched APIC routing to cluster x2apic.
[ 0.527832] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.532178] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1e330d67aea, max_idle_ns: 440795227757 ns
[ 0.532182] Calibrating delay loop (skipped), value calculated using timer frequency.. 4190.17 BogoMIPS (lpj=2095085)
[ 0.532211] CPU0: Thermal monitoring enabled (TM1)
[ 0.532299] process: using mwait in idle threads
[ 0.532304] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.532305] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.532307] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.532310] Spectre V2 : Mitigation: Retpolines
[ 0.532311] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.532312] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[ 0.532313] Speculative Store Bypass: Vulnerable
[ 0.532316] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[ 0.532317] MMIO Stale Data: Vulnerable: Clear CPU buffers attempted, no microcode
[ 0.532324] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.532326] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.532326] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.532328] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.532330] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.555561] Freeing SMP alternatives memory: 52K
[ 0.555563] pid_max: default: 90112 minimum: 704
[ 0.555780] LSM: Security Framework initializing
[ 0.577951] Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes, vmalloc)
[ 0.588914] Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes, vmalloc)
[ 0.589300] Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes, vmalloc)
[ 0.589646] Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes, vmalloc)
[ 0.590963] smpboot: Estimated ratio of average max frequency by base frequency (times 1024): 1170
[ 0.692985] smpboot: CPU0: Genuine Intel(R) CPU 0000 @ 2.10GHz (family: 0x6, model: 0x4f, stepping: 0x0)
[ 0.693181] Performance Events: PEBS fmt2+, Broadwell events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.693181] ... version: 3
[ 0.693181] ... bit width: 48
[ 0.693181] ... generic registers: 4
[ 0.693181] ... value mask: 0000ffffffffffff
[ 0.693181] ... max period: 00007fffffffffff
[ 0.693181] ... fixed-purpose events: 3
[ 0.693181] ... event mask: 000000070000000f
[ 0.693181] signal: max sigframe size: 1776
[ 0.693181] rcu: Hierarchical SRCU implementation.
[ 0.694745] smp: Bringing up secondary CPUs ...
[ 0.694933] x86: Booting SMP configuration:
[ 0.694934] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15 #16 #17 #18 #19 #20 #21
[ 0.753638] .... node #1, CPUs: #22
[ 0.005551] smpboot: CPU 22 Converting physical 0 to logical die 1
[ 0.817373] #23 #24 #25 #26 #27 #28 #29 #30 #31 #32 #33 #34 #35 #36 #37 #38 #39 #40 #41 #42 #43
[ 0.876364] .... node #0, CPUs: #44
[ 0.878362] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[ 0.878362] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details.
[ 0.879379] #45 #46 #47 #48 #49 #50 #51 #52 #53 #54 #55 #56 #57 #58 #59 #60 #61 #62 #63 #64 #65
[ 0.938389] .... node #1, CPUs: #66 #67 #68 #69 #70 #71 #72 #73 #74 #75 #76 #77 #78 #79 #80 #81 #82 #83 #84 #85 #86 #87
[ 0.999426] smp: Brought up 2 nodes, 88 CPUs
[ 0.999426] smpboot: Max logical packages: 2
[ 0.999426] smpboot: Total of 88 processors activated (368730.29 BogoMIPS)
[ 1.009369] devtmpfs: initialized
[ 1.009598] ACPI: PM: Registering ACPI NVS region [mem 0x7ac33000-0x7b662fff] (10682368 bytes)
[ 1.010498] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 1.010612] futex hash table entries: 32768 (order: 9, 2097152 bytes, vmalloc)
[ 1.011551] pinctrl core: initialized pinctrl subsystem
[ 1.011936] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 1.012402] thermal_sys: Registered thermal governor 'step_wise'
[ 1.012404] thermal_sys: Registered thermal governor 'user_space'
[ 1.012478] cpuidle: using governor menu
[ 1.012478] ACPI: bus type PCI registered
[ 1.012478] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 1.013268] dca service started, version 1.12.1
[ 1.013284] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000)
[ 1.013291] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820
[ 1.013313] PCI: Using configuration type 1 for base access
[ 1.016663] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 1.023284] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 1.023290] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 1.023290] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 1.042185] raid6: avx2x4 gen() 18306 MB/s
[ 1.059186] raid6: avx2x4 xor() 6399 MB/s
[ 1.076185] raid6: avx2x2 gen() 17723 MB/s
[ 1.093182] raid6: avx2x2 xor() 11835 MB/s
[ 1.110185] raid6: avx2x1 gen() 15886 MB/s
[ 1.127186] raid6: avx2x1 xor() 9990 MB/s
[ 1.144186] raid6: sse2x4 gen() 9328 MB/s
[ 1.161200] raid6: sse2x4 xor() 5739 MB/s
[ 1.178185] raid6: sse2x2 gen() 10016 MB/s
[ 1.195186] raid6: sse2x2 xor() 6800 MB/s
[ 1.212185] raid6: sse2x1 gen() 7661 MB/s
[ 1.229186] raid6: sse2x1 xor() 5180 MB/s
[ 1.229189] raid6: using algorithm avx2x4 gen() 18306 MB/s
[ 1.229191] raid6: .... xor() 6399 MB/s, rmw enabled
[ 1.229193] raid6: using avx2x2 recovery algorithm
[ 1.229394] ACPI: Added _OSI(Module Device)
[ 1.229395] ACPI: Added _OSI(Processor Device)
[ 1.229396] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 1.229397] ACPI: Added _OSI(Processor Aggregator Device)
[ 1.229399] ACPI: Added _OSI(Linux-Dell-Video)
[ 1.229400] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 1.229402] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 1.535938] ACPI: 4 ACPI AML tables successfully acquired and loaded
[ 1.574630] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 1.580650] ACPI: Dynamic OEM Table Load:
[ 1.662958] ACPI: Interpreter enabled
[ 1.662981] ACPI: PM: (supports S0 S3 S4 S5)
[ 1.662982] ACPI: Using IOAPIC for interrupt routing
[ 1.663012] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 1.664223] ACPI: Enabled 5 GPEs in block 00 to 3F
[ 1.741834] ACPI: PCI Root Bridge [UNC1] (domain 0000 [bus ff])
[ 1.741842] acpi PNP0A03:02: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 1.744651] acpi PNP0A03:02: _OSC: platform does not support [LTR]
[ 1.746076] acpi PNP0A03:02: _OSC: OS now controls [PCIeHotplug PME PCIeCapability]
[ 1.746148] PCI host bridge to bus 0000:ff
[ 1.746150] pci_bus 0000:ff: Unknown NUMA node; performance will be reduced
[ 1.746152] pci_bus 0000:ff: root bus resource [bus ff]
[ 1.746173] pci 0000:ff:0b.0: [8086:6f81] type 00 class 0x088000
[ 1.746275] pci 0000:ff:0b.1: [8086:6f36] type 00 class 0x110100
[ 1.746351] pci 0000:ff:0b.2: [8086:6f37] type 00 class 0x110100
[ 1.746423] pci 0000:ff:0b.3: [8086:6f76] type 00 class 0x088000
[ 1.746496] pci 0000:ff:0c.0: [8086:6fe0] type 00 class 0x088000
[ 1.746568] pci 0000:ff:0c.1: [8086:6fe1] type 00 class 0x088000
[ 1.746639] pci 0000:ff:0c.2: [8086:6fe2] type 00 class 0x088000
[ 1.746710] pci 0000:ff:0c.3: [8086:6fe3] type 00 class 0x088000
[ 1.746799] pci 0000:ff:0c.4: [8086:6fe4] type 00 class 0x088000
[ 1.746870] pci 0000:ff:0c.5: [8086:6fe5] type 00 class 0x088000
[ 1.746940] pci 0000:ff:0c.6: [8086:6fe6] type 00 class 0x088000
[ 1.747011] pci 0000:ff:0c.7: [8086:6fe7] type 00 class 0x088000
[ 1.747081] pci 0000:ff:0d.0: [8086:6fe8] type 00 class 0x088000
[ 1.747151] pci 0000:ff:0d.1: [8086:6fe9] type 00 class 0x088000
[ 1.747230] pci 0000:ff:0d.2: [8086:6fea] type 00 class 0x088000
[ 1.747301] pci 0000:ff:0d.3: [8086:6feb] type 00 class 0x088000
[ 1.747373] pci 0000:ff:0d.4: [8086:6fec] type 00 class 0x088000
[ 1.747443] pci 0000:ff:0d.5: [8086:6fed] type 00 class 0x088000
[ 1.747514] pci 0000:ff:0d.6: [8086:6fee] type 00 class 0x088000
[ 1.747586] pci 0000:ff:0d.7: [8086:6fef] type 00 class 0x088000
[ 1.747659] pci 0000:ff:0e.0: [8086:6ff0] type 00 class 0x088000
[ 1.747729] pci 0000:ff:0e.1: [8086:6ff1] type 00 class 0x088000
[ 1.747801] pci 0000:ff:0e.2: [8086:6ff2] type 00 class 0xffffff
[ 1.747872] pci 0000:ff:0e.3: [8086:6ff3] type 00 class 0xffffff
[ 1.747943] pci 0000:ff:0e.4: [8086:6ff4] type 00 class 0xffffff
[ 1.748015] pci 0000:ff:0e.5: [8086:6ff5] type 00 class 0xffffff
[ 1.748087] pci 0000:ff:0f.0: [8086:6ff8] type 00 class 0x088000
[ 1.748157] pci 0000:ff:0f.1: [8086:6ff9] type 00 class 0x088000
[ 1.748236] pci 0000:ff:0f.2: [8086:6ffa] type 00 class 0x088000
[ 1.748308] pci 0000:ff:0f.3: [8086:6ffb] type 00 class 0x088000
[ 1.748379] pci 0000:ff:0f.4: [8086:6ffc] type 00 class 0x088000
[ 1.748451] pci 0000:ff:0f.5: [8086:6ffd] type 00 class 0x088000
[ 1.748524] pci 0000:ff:0f.6: [8086:6ffe] type 00 class 0x088000
[ 1.748602] pci 0000:ff:10.0: [8086:6f1d] type 00 class 0x088000
[ 1.748673] pci 0000:ff:10.1: [8086:6f34] type 00 class 0x110100
[ 1.748751] pci 0000:ff:10.5: [8086:6f1e] type 00 class 0x088000
[ 1.748820] pci 0000:ff:10.6: [8086:6f7d] type 00 class 0x110100
[ 1.748890] pci 0000:ff:10.7: [8086:6f1f] type 00 class 0x088000
[ 1.748961] pci 0000:ff:12.0: [8086:6fa0] type 00 class 0x088000
[ 1.749016] pci 0000:ff:12.1: [8086:6f30] type 00 class 0x110100
[ 1.749092] pci 0000:ff:12.4: [8086:6f60] type 00 class 0x088000
[ 1.749146] pci 0000:ff:12.5: [8086:6f38] type 00 class 0x110100
[ 1.749231] pci 0000:ff:13.0: [8086:6fa8] type 00 class 0x088000
[ 1.749309] pci 0000:ff:13.1: [8086:6f71] type 00 class 0x088000
[ 1.749387] pci 0000:ff:13.2: [8086:6faa] type 00 class 0x088000
[ 1.749464] pci 0000:ff:13.3: [8086:6fab] type 00 class 0x088000
[ 1.749544] pci 0000:ff:13.6: [8086:6fae] type 00 class 0x088000
[ 1.749617] pci 0000:ff:13.7: [8086:6faf] type 00 class 0x088000
[ 1.749706] pci 0000:ff:16.0: [8086:6f68] type 00 class 0x088000
[ 1.749784] pci 0000:ff:16.1: [8086:6f79] type 00 class 0x088000
[ 1.749861] pci 0000:ff:16.2: [8086:6f6a] type 00 class 0x088000
[ 1.749939] pci 0000:ff:16.3: [8086:6f6b] type 00 class 0x088000
[ 1.750020] pci 0000:ff:16.6: [8086:6f6e] type 00 class 0x088000
[ 1.750098] pci 0000:ff:16.7: [8086:6f6f] type 00 class 0x088000
[ 1.750188] pci 0000:ff:1e.0: [8086:6f98] type 00 class 0x088000
[ 1.750262] pci 0000:ff:1e.1: [8086:6f99] type 00 class 0x088000
[ 1.750335] pci 0000:ff:1e.2: [8086:6f9a] type 00 class 0x088000
[ 1.750409] pci 0000:ff:1e.3: [8086:6fc0] type 00 class 0x088000
[ 1.750465] pci 0000:ff:1e.4: [8086:6f9c] type 00 class 0x088000
[ 1.750543] pci 0000:ff:1f.0: [8086:6f88] type 00 class 0x088000
[ 1.750616] pci 0000:ff:1f.2: [8086:6f8a] type 00 class 0x088000
[ 1.750803] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus 7f])
[ 1.750807] acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 1.751657] acpi PNP0A03:03: _OSC: platform does not support [LTR]
[ 1.753092] acpi PNP0A03:03: _OSC: OS now controls [PCIeHotplug PME PCIeCapability]
[ 1.753154] PCI host bridge to bus 0000:7f
[ 1.753156] pci_bus 0000:7f: Unknown NUMA node; performance will be reduced
[ 1.753158] pci_bus 0000:7f: root bus resource [bus 7f]
[ 1.753172] pci 0000:7f:0b.0: [8086:6f81] type 00 class 0x088000
[ 1.753256] pci 0000:7f:0b.1: [8086:6f36] type 00 class 0x110100
[ 1.753328] pci 0000:7f:0b.2: [8086:6f37] type 00 class 0x110100
[ 1.753398] pci 0000:7f:0b.3: [8086:6f76] type 00 class 0x088000
[ 1.753469] pci 0000:7f:0c.0: [8086:6fe0] type 00 class 0x088000
[ 1.753544] pci 0000:7f:0c.1: [8086:6fe1] type 00 class 0x088000
[ 1.753614] pci 0000:7f:0c.2: [8086:6fe2] type 00 class 0x088000
[ 1.753684] pci 0000:7f:0c.3: [8086:6fe3] type 00 class 0x088000
[ 1.753752] pci 0000:7f:0c.4: [8086:6fe4] type 00 class 0x088000
[ 1.753820] pci 0000:7f:0c.5: [8086:6fe5] type 00 class 0x088000
[ 1.753889] pci 0000:7f:0c.6: [8086:6fe6] type 00 class 0x088000
[ 1.753958] pci 0000:7f:0c.7: [8086:6fe7] type 00 class 0x088000
[ 1.754028] pci 0000:7f:0d.0: [8086:6fe8] type 00 class 0x088000
[ 1.754096] pci 0000:7f:0d.1: [8086:6fe9] type 00 class 0x088000
[ 1.754163] pci 0000:7f:0d.2: [8086:6fea] type 00 class 0x088000
[ 1.754241] pci 0000:7f:0d.3: [8086:6feb] type 00 class 0x088000
[ 1.754310] pci 0000:7f:0d.4: [8086:6fec] type 00 class 0x088000
[ 1.754377] pci 0000:7f:0d.5: [8086:6fed] type 00 class 0x088000
[ 1.754445] pci 0000:7f:0d.6: [8086:6fee] type 00 class 0x088000
[ 1.754514] pci 0000:7f:0d.7: [8086:6fef] type 00 class 0x088000
[ 1.754583] pci 0000:7f:0e.0: [8086:6ff0] type 00 class 0x088000
[ 1.754653] pci 0000:7f:0e.1: [8086:6ff1] type 00 class 0x088000
[ 1.754721] pci 0000:7f:0e.2: [8086:6ff2] type 00 class 0xffffff
[ 1.754789] pci 0000:7f:0e.3: [8086:6ff3] type 00 class 0xffffff
[ 1.754856] pci 0000:7f:0e.4: [8086:6ff4] type 00 class 0xffffff
[ 1.754925] pci 0000:7f:0e.5: [8086:6ff5] type 00 class 0xffffff
[ 1.754995] pci 0000:7f:0f.0: [8086:6ff8] type 00 class 0x088000
[ 1.755063] pci 0000:7f:0f.1: [8086:6ff9] type 00 class 0x088000
[ 1.755131] pci 0000:7f:0f.2: [8086:6ffa] type 00 class 0x088000
[ 1.755206] pci 0000:7f:0f.3: [8086:6ffb] type 00 class 0x088000
[ 1.755277] pci 0000:7f:0f.4: [8086:6ffc] type 00 class 0x088000
[ 1.755345] pci 0000:7f:0f.5: [8086:6ffd] type 00 class 0x088000
[ 1.755413] pci 0000:7f:0f.6: [8086:6ffe] type 00 class 0x088000
[ 1.755483] pci 0000:7f:10.0: [8086:6f1d] type 00 class 0x088000
[ 1.755554] pci 0000:7f:10.1: [8086:6f34] type 00 class 0x110100
[ 1.755626] pci 0000:7f:10.5: [8086:6f1e] type 00 class 0x088000
[ 1.755709] pci 0000:7f:10.6: [8086:6f7d] type 00 class 0x110100
[ 1.755776] pci 0000:7f:10.7: [8086:6f1f] type 00 class 0x088000
[ 1.755845] pci 0000:7f:12.0: [8086:6fa0] type 00 class 0x088000
[ 1.755900] pci 0000:7f:12.1: [8086:6f30] type 00 class 0x110100
[ 1.755972] pci 0000:7f:12.4: [8086:6f60] type 00 class 0x088000
[ 1.756027] pci 0000:7f:12.5: [8086:6f38] type 00 class 0x110100
[ 1.756100] pci 0000:7f:13.0: [8086:6fa8] type 00 class 0x088000
[ 1.756176] pci 0000:7f:13.1: [8086:6f71] type 00 class 0x088000
[ 1.756260] pci 0000:7f:13.2: [8086:6faa] type 00 class 0x088000
[ 1.756335] pci 0000:7f:13.3: [8086:6fab] type 00 class 0x088000
[ 1.756410] pci 0000:7f:13.6: [8086:6fae] type 00 class 0x088000
[ 1.756481] pci 0000:7f:13.7: [8086:6faf] type 00 class 0x088000
[ 1.756561] pci 0000:7f:16.0: [8086:6f68] type 00 class 0x088000
[ 1.756638] pci 0000:7f:16.1: [8086:6f79] type 00 class 0x088000
[ 1.756712] pci 0000:7f:16.2: [8086:6f6a] type 00 class 0x088000
[ 1.756788] pci 0000:7f:16.3: [8086:6f6b] type 00 class 0x088000
[ 1.756872] pci 0000:7f:16.6: [8086:6f6e] type 00 class 0x088000
[ 1.756946] pci 0000:7f:16.7: [8086:6f6f] type 00 class 0x088000
[ 1.757025] pci 0000:7f:1e.0: [8086:6f98] type 00 class 0x088000
[ 1.757094] pci 0000:7f:1e.1: [8086:6f99] type 00 class 0x088000
[ 1.757164] pci 0000:7f:1e.2: [8086:6f9a] type 00 class 0x088000
[ 1.757244] pci 0000:7f:1e.3: [8086:6fc0] type 00 class 0x088000
[ 1.757299] pci 0000:7f:1e.4: [8086:6f9c] type 00 class 0x088000
[ 1.757374] pci 0000:7f:1f.0: [8086:6f88] type 00 class 0x088000
[ 1.757444] pci 0000:7f:1f.2: [8086:6f8a] type 00 class 0x088000
[ 1.795560] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e])
[ 1.795566] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 1.796410] acpi PNP0A08:00: _OSC: platform does not support [LTR]
[ 1.797854] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability]
[ 1.798209] acpi PNP0A08:00: ignoring host bridge window [mem 0x000c4000-0x000cbfff window] (conflicts with Video ROM [mem 0x000c0000-0x000c7fff])
[ 1.798544] PCI host bridge to bus 0000:00
[ 1.798546] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 1.798549] pci_bus 0000:00: root bus resource [io 0x1000-0x7fff window]
[ 1.798551] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 1.798553] pci_bus 0000:00: root bus resource [mem 0x90000000-0xc7ffbfff window]
[ 1.798555] pci_bus 0000:00: root bus resource [mem 0x380000000000-0x383fffffffff window]
[ 1.798557] pci_bus 0000:00: root bus resource [bus 00-7e]
[ 1.798745] pci 0000:00:00.0: [8086:6f00] type 00 class 0x060000
[ 1.799082] pci 0000:00:01.0: [8086:6f02] type 01 class 0x060400
[ 1.799145] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 1.799471] pci 0000:00:02.0: [8086:6f04] type 01 class 0x060400
[ 1.799534] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 1.799846] pci 0000:00:02.2: [8086:6f06] type 01 class 0x060400
[ 1.799912] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold
[ 1.800232] pci 0000:00:03.0: [8086:6f08] type 01 class 0x060400
[ 1.800293] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 1.800618] pci 0000:00:05.0: [8086:6f28] type 00 class 0x088000
[ 1.800934] pci 0000:00:05.1: [8086:6f29] type 00 class 0x088000
[ 1.801166] pci 0000:00:05.2: [8086:6f2a] type 00 class 0x088000
[ 1.801440] pci 0000:00:05.4: [8086:6f2c] type 00 class 0x080020
[ 1.801450] pci 0000:00:05.4: reg 0x10: [mem 0x91d05000-0x91d05fff]
[ 1.801740] pci 0000:00:11.0: [8086:8d7c] type 00 class 0xff0000
[ 1.802173] pci 0000:00:11.4: [8086:8d62] type 00 class 0x010601
[ 1.802195] pci 0000:00:11.4: reg 0x10: [io 0x20a0-0x20a7]
[ 1.802205] pci 0000:00:11.4: reg 0x14: [io 0x20bc-0x20bf]
[ 1.802214] pci 0000:00:11.4: reg 0x18: [io 0x2098-0x209f]
[ 1.802223] pci 0000:00:11.4: reg 0x1c: [io 0x20b8-0x20bb]
[ 1.802232] pci 0000:00:11.4: reg 0x20: [io 0x2040-0x205f]
[ 1.802241] pci 0000:00:11.4: reg 0x24: [mem 0x91d04000-0x91d047ff]
[ 1.802286] pci 0000:00:11.4: PME# supported from D3hot
[ 1.802578] pci 0000:00:14.0: [8086:8d31] type 00 class 0x0c0330
[ 1.802597] pci 0000:00:14.0: reg 0x10: [mem 0x383ffff00000-0x383ffff0ffff 64bit]
[ 1.802663] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 1.802945] pci 0000:00:16.0: [8086:8d3a] type 00 class 0x078000
[ 1.802964] pci 0000:00:16.0: reg 0x10: [mem 0x383ffff13000-0x383ffff1300f 64bit]
[ 1.803031] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 1.803313] pci 0000:00:16.1: [8086:8d3b] type 00 class 0x078000
[ 1.803332] pci 0000:00:16.1: reg 0x10: [mem 0x383ffff12000-0x383ffff1200f 64bit]
[ 1.803398] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold
[ 1.803694] pci 0000:00:1a.0: [8086:8d2d] type 00 class 0x0c0320
[ 1.803711] pci 0000:00:1a.0: reg 0x10: [mem 0x91d02000-0x91d023ff]
[ 1.803800] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 1.804087] pci 0000:00:1c.0: [8086:8d10] type 01 class 0x060400
[ 1.804171] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 1.804494] pci 0000:00:1c.3: [8086:8d16] type 01 class 0x060400
[ 1.804583] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 1.804901] pci 0000:00:1d.0: [8086:8d26] type 00 class 0x0c0320
[ 1.804918] pci 0000:00:1d.0: reg 0x10: [mem 0x91d01000-0x91d013ff]
[ 1.805008] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 1.805306] pci 0000:00:1f.0: [8086:8d44] type 00 class 0x060100
[ 1.805698] pci 0000:00:1f.2: [8086:8d02] type 00 class 0x010601
[ 1.805712] pci 0000:00:1f.2: reg 0x10: [io 0x2078-0x207f]
[ 1.805720] pci 0000:00:1f.2: reg 0x14: [io 0x20ac-0x20af]
[ 1.805728] pci 0000:00:1f.2: reg 0x18: [io 0x2070-0x2077]
[ 1.805736] pci 0000:00:1f.2: reg 0x1c: [io 0x20a8-0x20ab]
[ 1.805743] pci 0000:00:1f.2: reg 0x20: [io 0x2020-0x203f]
[ 1.805751] pci 0000:00:1f.2: reg 0x24: [mem 0x91d00000-0x91d007ff]
[ 1.805790] pci 0000:00:1f.2: PME# supported from D3hot
[ 1.806064] pci 0000:00:1f.3: [8086:8d22] type 00 class 0x0c0500
[ 1.806082] pci 0000:00:1f.3: reg 0x10: [mem 0x383ffff11000-0x383ffff110ff 64bit]
[ 1.806104] pci 0000:00:1f.3: reg 0x20: [io 0x2000-0x201f]
[ 1.806313] acpiphp: Slot [528] registered
[ 1.806344] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 1.806428] acpiphp: Slot [512] registered
[ 1.806457] pci 0000:00:02.0: PCI bridge to [bus 02]
[ 1.806541] acpiphp: Slot [0] registered
[ 1.806630] pci 0000:03:00.0: [8086:1528] type 00 class 0x020000
[ 1.806647] pci 0000:03:00.0: reg 0x10: [mem 0x383fffc00000-0x383fffdfffff 64bit pref]
[ 1.806655] pci 0000:03:00.0: reg 0x18: [io 0x1020-0x103f]
[ 1.806672] pci 0000:03:00.0: reg 0x20: [mem 0x383fffe04000-0x383fffe07fff 64bit pref]
[ 1.806745] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 1.806769] pci 0000:03:00.0: reg 0x184: [mem 0x91900000-0x91903fff 64bit]
[ 1.806771] pci 0000:03:00.0: VF(n) BAR0 space: [mem 0x91900000-0x919fffff 64bit] (contains BAR0 for 64 VFs)
[ 1.806793] pci 0000:03:00.0: reg 0x190: [mem 0x91a00000-0x91a03fff 64bit]
[ 1.806795] pci 0000:03:00.0: VF(n) BAR3 space: [mem 0x91a00000-0x91afffff 64bit] (contains BAR3 for 64 VFs)
[ 1.807094] pci 0000:03:00.1: [8086:1528] type 00 class 0x020000
[ 1.807111] pci 0000:03:00.1: reg 0x10: [mem 0x383fffa00000-0x383fffbfffff 64bit pref]
[ 1.807119] pci 0000:03:00.1: reg 0x18: [io 0x1000-0x101f]
[ 1.807136] pci 0000:03:00.1: reg 0x20: [mem 0x383fffe00000-0x383fffe03fff 64bit pref]
[ 1.807221] pci 0000:03:00.1: PME# supported from D0 D3hot D3cold
[ 1.807242] pci 0000:03:00.1: reg 0x184: [mem 0x91b00000-0x91b03fff 64bit]
[ 1.807244] pci 0000:03:00.1: VF(n) BAR0 space: [mem 0x91b00000-0x91bfffff 64bit] (contains BAR0 for 64 VFs)
[ 1.807258] pci 0000:03:00.1: reg 0x190: [mem 0x91c00000-0x91c03fff 64bit]
[ 1.807260] pci 0000:03:00.1: VF(n) BAR3 space: [mem 0x91c00000-0x91cfffff 64bit] (contains BAR3 for 64 VFs)
[ 1.807518] pci 0000:00:02.2: PCI bridge to [bus 03-04]
[ 1.807522] pci 0000:00:02.2: bridge window [io 0x1000-0x1fff]
[ 1.807526] pci 0000:00:02.2: bridge window [mem 0x91900000-0x91cfffff]
[ 1.807530] pci 0000:00:02.2: bridge window [mem 0x383fffa00000-0x383fffefffff 64bit pref]
[ 1.807615] acpiphp: Slot [785] registered
[ 1.807644] pci 0000:00:03.0: PCI bridge to [bus 05]
[ 1.807701] pci 0000:00:1c.0: PCI bridge to [bus 06]
[ 1.807781] pci 0000:07:00.0: [102b:0522] type 00 class 0x030000
[ 1.807808] pci 0000:07:00.0: reg 0x10: [mem 0x90000000-0x90ffffff pref]
[ 1.807824] pci 0000:07:00.0: reg 0x14: [mem 0x91800000-0x91803fff]
[ 1.807840] pci 0000:07:00.0: reg 0x18: [mem 0x91000000-0x917fffff]
[ 1.807896] pci 0000:07:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[ 1.807925] pci 0000:07:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 1.808079] pci 0000:07:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 1.808091] pci 0000:00:1c.3: PCI bridge to [bus 07]
[ 1.808096] pci 0000:00:1c.3: bridge window [mem 0x91000000-0x918fffff]
[ 1.808101] pci 0000:00:1c.3: bridge window [mem 0x90000000-0x90ffffff 64bit pref]
[ 1.808130] pci_bus 0000:00: on NUMA node 0
[ 1.808791] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[ 1.808869] ACPI: PCI: Interrupt link LNKB configured for IRQ 9
[ 1.808943] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[ 1.809017] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[ 1.809090] ACPI: PCI: Interrupt link LNKE configured for IRQ 5
[ 1.809164] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[ 1.809165] ACPI: PCI: Interrupt link LNKF disabled
[ 1.809248] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[ 1.809249] ACPI: PCI: Interrupt link LNKG disabled
[ 1.809322] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[ 1.809323] ACPI: PCI: Interrupt link LNKH disabled
[ 1.809814] ACPI: PCI Root Bridge [PCI1] (domain 0000 [bus 80-fe])
[ 1.809819] acpi PNP0A08:01: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 1.810651] acpi PNP0A08:01: _OSC: platform does not support [LTR]
[ 1.812069] acpi PNP0A08:01: _OSC: OS now controls [PCIeHotplug PME PCIeCapability]
[ 1.812313] PCI host bridge to bus 0000:80
[ 1.812315] pci_bus 0000:80: root bus resource [io 0x8000-0xffff window]
[ 1.812318] pci_bus 0000:80: root bus resource [mem 0xc8000000-0xfbffbfff window]
[ 1.812320] pci_bus 0000:80: root bus resource [mem 0x384000000000-0x387fffffffff window]
[ 1.812322] pci_bus 0000:80: root bus resource [bus 80-fe]
[ 1.812424] pci 0000:80:05.0: [8086:6f28] type 00 class 0x088000
[ 1.812676] pci 0000:80:05.1: [8086:6f29] type 00 class 0x088000
[ 1.812878] pci 0000:80:05.2: [8086:6f2a] type 00 class 0x088000
[ 1.813066] pci 0000:80:05.4: [8086:6f2c] type 00 class 0x080020
[ 1.813075] pci 0000:80:05.4: reg 0x10: [mem 0xc8000000-0xc8000fff]
[ 1.813243] pci_bus 0000:80: on NUMA node 1
[ 1.814208] iommu: Default domain type: Translated
[ 1.814208] iommu: DMA domain TLB invalidation policy: lazy mode
[ 1.814215] pci 0000:07:00.0: vgaarb: setting as boot VGA device
[ 1.814215] pci 0000:07:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 1.814215] pci 0000:07:00.0: vgaarb: bridge control possible
[ 1.814215] vgaarb: loaded
[ 1.814330] SCSI subsystem initialized
[ 1.814390] libata version 3.00 loaded.
[ 1.814390] usbcore: USB support disabled
[ 1.814390] pps_core: LinuxPPS API ver. 1 registered
[ 1.814390] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 1.814390] PTP clock support registered
[ 1.815290] EDAC MC: Ver: 3.0.0
[ 1.815423] EDAC DEBUG: edac_mc_sysfs_init: device mc created
[ 1.815423] Advanced Linux Sound Architecture Driver Initialized.
[ 1.815545] Bluetooth: Core ver 2.22
[ 1.815554] NET: Registered PF_BLUETOOTH protocol family
[ 1.815555] Bluetooth: HCI device and connection manager initialized
[ 1.815559] Bluetooth: HCI socket layer initialized
[ 1.815561] Bluetooth: L2CAP socket layer initialized
[ 1.815567] Bluetooth: SCO socket layer initialized
[ 1.815597] PCI: Using ACPI for IRQ routing
[ 1.820565] PCI: pci_cache_line_size set to 64 bytes
[ 1.820765] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
[ 1.820768] e820: reserve RAM buffer [mem 0x775f1000-0x77ffffff]
[ 1.820770] e820: reserve RAM buffer [mem 0x78c83000-0x7bffffff]
[ 1.820772] e820: reserve RAM buffer [mem 0x7b800000-0x7bffffff]
[ 1.820795] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 1.820801] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 1.823423] clocksource: Switched to clocksource tsc-early
[ 1.853981] pnp: PnP ACPI init
[ 1.855288] system 00:01: [io 0x0500-0x053f] has been reserved
[ 1.855293] system 00:01: [io 0x0400-0x047f] has been reserved
[ 1.855296] system 00:01: [io 0x0540-0x057f] has been reserved
[ 1.855298] system 00:01: [io 0x0600-0x061f] has been reserved
[ 1.855300] system 00:01: [io 0x0ca0-0x0ca5] could not be reserved
[ 1.855303] system 00:01: [io 0x0880-0x0883] has been reserved
[ 1.855305] system 00:01: [io 0x0800-0x081f] has been reserved
[ 1.855308] system 00:01: [mem 0xfed1c000-0xfed3ffff] could not be reserved
[ 1.855310] system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved
[ 1.855312] system 00:01: [mem 0xff000000-0xffffffff] could not be reserved
[ 1.855315] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved
[ 1.855317] system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved
[ 1.855319] system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved
[ 1.855320] system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved
[ 1.856166] pnp: PnP ACPI: found 4 devices
[ 1.863010] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 1.863198] NET: Registered PF_INET protocol family
[ 1.864015] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, vmalloc)
[ 1.867042] tcp_listen_portaddr_hash hash table entries: 32768 (order: 8, 1310720 bytes, vmalloc)
[ 1.867500] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, vmalloc)
[ 1.867732] TCP established hash table entries: 524288 (order: 10, 4194304 bytes, vmalloc)
[ 1.868691] TCP bind hash table entries: 65536 (order: 9, 2621440 bytes, vmalloc)
[ 1.869526] TCP: Hash tables configured (established 524288 bind 65536)
[ 1.869988] UDP hash table entries: 32768 (order: 9, 3145728 bytes, vmalloc)
[ 1.871195] UDP-Lite hash table entries: 32768 (order: 9, 3145728 bytes, vmalloc)
[ 1.872591] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 1.872906] RPC: Registered named UNIX socket transport module.
[ 1.872907] RPC: Registered udp transport module.
[ 1.872908] RPC: Registered tcp transport module.
[ 1.872909] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.872949] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 1.872959] pci 0000:00:02.0: PCI bridge to [bus 02]
[ 1.872966] pci 0000:00:02.2: PCI bridge to [bus 03-04]
[ 1.872968] pci 0000:00:02.2: bridge window [io 0x1000-0x1fff]
[ 1.872972] pci 0000:00:02.2: bridge window [mem 0x91900000-0x91cfffff]
[ 1.872975] pci 0000:00:02.2: bridge window [mem 0x383fffa00000-0x383fffefffff 64bit pref]
[ 1.872979] pci 0000:00:03.0: PCI bridge to [bus 05]
[ 1.872986] pci 0000:00:1c.0: PCI bridge to [bus 06]
[ 1.872997] pci 0000:00:1c.3: PCI bridge to [bus 07]
[ 1.873001] pci 0000:00:1c.3: bridge window [mem 0x91000000-0x918fffff]
[ 1.873005] pci 0000:00:1c.3: bridge window [mem 0x90000000-0x90ffffff 64bit pref]
[ 1.873011] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 1.873013] pci_bus 0000:00: resource 5 [io 0x1000-0x7fff window]
[ 1.873014] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 1.873016] pci_bus 0000:00: resource 7 [mem 0x90000000-0xc7ffbfff window]
[ 1.873017] pci_bus 0000:00: resource 8 [mem 0x380000000000-0x383fffffffff window]
[ 1.873019] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff]
[ 1.873020] pci_bus 0000:03: resource 1 [mem 0x91900000-0x91cfffff]
[ 1.873022] pci_bus 0000:03: resource 2 [mem 0x383fffa00000-0x383fffefffff 64bit pref]
[ 1.873023] pci_bus 0000:07: resource 1 [mem 0x91000000-0x918fffff]
[ 1.873025] pci_bus 0000:07: resource 2 [mem 0x90000000-0x90ffffff 64bit pref]
[ 1.873176] pci_bus 0000:80: resource 4 [io 0x8000-0xffff window]
[ 1.873177] pci_bus 0000:80: resource 5 [mem 0xc8000000-0xfbffbfff window]
[ 1.873179] pci_bus 0000:80: resource 6 [mem 0x384000000000-0x387fffffffff window]
[ 1.873500] pci 0000:00:05.0: disabled boot interrupts on device [8086:6f28]
[ 1.891708] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x6e0 took 16812 usecs
[ 1.908697] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x6e0 took 16569 usecs
[ 1.908731] pci 0000:80:05.0: disabled boot interrupts on device [8086:6f28]
[ 1.908740] PCI: CLS 32 bytes, default 64
[ 1.908858] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.908859] software IO TLB: mapped [mem 0x00000000735f1000-0x00000000775f1000] (64MB)
[ 1.909765] RAPL PMU: API unit is 2^-32 Joules, 2 fixed counters, 655360 ms ovfl timer
[ 1.909767] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 1.909768] RAPL PMU: hw unit of domain dram 2^-16 Joules
[ 1.913729] mce: Machine check injector initialized
[ 2.005832] Initialise system trusted keyrings
[ 2.005922] workingset: timestamp_bits=40 max_order=24 bucket_order=0
[ 2.010328] NFS: Registering the id_resolver key type
[ 2.010339] Key type id_resolver registered
[ 2.010340] Key type id_legacy registered
[ 2.010434] SGI XFS with ACLs, security attributes, realtime, quota, no debug enabled
[ 2.011569] aufs 5.15.5-20220221
[ 2.023695] xor: automatically using best checksumming function avx
[ 2.023818] async_tx: api initialized (async)
[ 2.023820] Key type asymmetric registered
[ 2.023822] Asymmetric key parser 'x509' registered
[ 2.023846] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 2.023848] io scheduler mq-deadline registered
[ 2.023849] io scheduler kyber registered
[ 2.025443] pcieport 0000:00:01.0: PME: Signaling with IRQ 25
[ 2.025912] pcieport 0000:00:02.0: PME: Signaling with IRQ 26
[ 2.026320] pcieport 0000:00:02.2: PME: Signaling with IRQ 27
[ 2.026770] pcieport 0000:00:03.0: PME: Signaling with IRQ 28
[ 2.027118] pcieport 0000:00:1c.0: PME: Signaling with IRQ 29
[ 2.027467] pcieport 0000:00:1c.3: PME: Signaling with IRQ 30
[ 2.028022] Monitor-Mwait will be used to enter C-1 state
[ 2.028038] Monitor-Mwait will be used to enter C-2 state
[ 2.028047] ACPI: \_SB_.SCK0.CP00: Found 2 idle states
[ 2.035343] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 2.035453] ACPI: button: Power Button [PWRF]
[ 2.284591] ioatdma: Intel(R) QuickData Technology Driver 5.00
[ 2.284824] Serial: 8250/16550 driver, 16 ports, IRQ sharing disabled
[ 2.284898] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 2.285084] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 2.287293] Linux agpgart interface v0.103
[ 2.303845] brd: module loaded
[ 2.318434] loop: module loaded
[ 2.318669] isci: Intel(R) C600 SAS Controller Driver - version 1.2.0
[ 2.318728] mpt3sas version 39.100.00.00 loaded
[ 2.319887] ahci 0000:00:11.4: version 3.0
[ 2.320183] ahci 0000:00:11.4: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0xf impl SATA mode
[ 2.320188] ahci 0000:00:11.4: flags: 64bit ncq pm led clo pio slum part ems apst
[ 2.329573] scsi host0: ahci
[ 2.329939] scsi host1: ahci
[ 2.330187] scsi host2: ahci
[ 2.330427] scsi host3: ahci
[ 2.330512] ata1: SATA max UDMA/133 abar m2048@0x91d04000 port 0x91d04100 irq 31
[ 2.330516] ata2: SATA max UDMA/133 abar m2048@0x91d04000 port 0x91d04180 irq 31
[ 2.330518] ata3: SATA max UDMA/133 abar m2048@0x91d04000 port 0x91d04200 irq 31
[ 2.330520] ata4: SATA max UDMA/133 abar m2048@0x91d04000 port 0x91d04280 irq 31
[ 2.330918] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[ 2.330924] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[ 2.346757] scsi host4: ahci
[ 2.347027] scsi host5: ahci
[ 2.347275] scsi host6: ahci
[ 2.347526] scsi host7: ahci
[ 2.347785] scsi host8: ahci
[ 2.348045] scsi host9: ahci
[ 2.348130] ata5: SATA max UDMA/133 abar m2048@0x91d00000 port 0x91d00100 irq 32
[ 2.348133] ata6: SATA max UDMA/133 abar m2048@0x91d00000 port 0x91d00180 irq 32
[ 2.348135] ata7: SATA max UDMA/133 abar m2048@0x91d00000 port 0x91d00200 irq 32
[ 2.348137] ata8: SATA max UDMA/133 abar m2048@0x91d00000 port 0x91d00280 irq 32
[ 2.348139] ata9: SATA max UDMA/133 abar m2048@0x91d00000 port 0x91d00300 irq 32
[ 2.348141] ata10: SATA max UDMA/133 abar m2048@0x91d00000 port 0x91d00380 irq 32
[ 2.348894] tun: Universal TUN/TAP device driver, 1.6
[ 2.349030] e100: Intel(R) PRO/100 Network Driver
[ 2.349032] e100: Copyright(c) 1999-2006 Intel Corporation
[ 2.349102] e1000: Intel(R) PRO/1000 Network Driver
[ 2.349103] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 2.349166] e1000e: Intel(R) PRO/1000 Network Driver
[ 2.349167] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 2.349247] igb: Intel(R) Gigabit Ethernet Network Driver
[ 2.349248] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 2.349305] Intel(R) 2.5G Ethernet Linux Driver
[ 2.349306] Copyright(c) 2018 Intel Corporation.
[ 2.349355] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver
[ 2.349357] ixgbe: Copyright (c) 1999-2016 Intel Corporation.
[ 2.615345] ixgbe 0000:03:00.0: Multiqueue Enabled: Rx Queue count = 63, Tx Queue count = 63 XDP Queue count = 0
[ 2.637769] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.637796] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.637835] ata1: SATA link down (SStatus 0 SControl 300)
[ 2.637872] ata3: SATA link down (SStatus 0 SControl 300)
[ 2.637914] ata4.00: ATA-10: INTEL SSDSC2KB480G7, SCV10142, max UDMA/133
[ 2.637919] ata4.00: 937703088 sectors, multi 1: LBA48 NCQ (depth 32)
[ 2.638158] ata4.00: configured for UDMA/133
[ 2.638490] scsi 3:0:0:0: Direct-Access ATA INTEL SSDSC2KB48 0142 PQ: 0 ANSI: 5
[ 2.638871] ata4.00: Enabling discard_zeroes_data
[ 2.638916] sd 3:0:0:0: [sda] 937703088 512-byte logical blocks: (480 GB/447 GiB)
[ 2.638919] sd 3:0:0:0: [sda] 4096-byte physical blocks
[ 2.638927] sd 3:0:0:0: [sda] Write Protect is off
[ 2.638930] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.638942] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.640887] ata4.00: Enabling discard_zeroes_data
[ 2.642987] sda: sda1
[ 2.643160] ata4.00: Enabling discard_zeroes_data
[ 2.643226] sd 3:0:0:0: [sda] Attached SCSI disk
[ 2.653105] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.653264] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.661592] ata10: SATA link down (SStatus 0 SControl 300)
[ 2.661667] ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.661695] ata8: SATA link down (SStatus 0 SControl 300)
[ 2.661733] ata9: SATA link down (SStatus 0 SControl 300)
[ 2.664427] ata7.00: supports DRM functions and may not be fully accessible
[ 2.664431] ata7.00: ATA-10: INTEL SSDSC2BF240A5, TG21, max UDMA/133
[ 2.664740] ata7.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 2.688351] ata7.00: Features: Trust Dev-Sleep
[ 2.691023] ata7.00: supports DRM functions and may not be fully accessible
[ 2.700386] ixgbe 0000:03:00.0: 32.000 Gb/s available PCIe bandwidth (5.0 GT/s PCIe x8 link)
[ 2.701817] ata6.00: ATA-8: WDC WD2500BEKT-75PVMT0, 01.01A01, max UDMA/133
[ 2.702527] ata6.00: ATA Identify Device Log not supported
[ 2.702530] ata6.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 32), AA
[ 2.705082] ata6.00: ATA Identify Device Log not supported
[ 2.705094] ata6.00: configured for UDMA/133
[ 2.705429] scsi 5:0:0:0: Direct-Access ATA WDC WD2500BEKT-7 1A01 PQ: 0 ANSI: 5
[ 2.705893] sd 5:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[ 2.705914] sd 5:0:0:0: [sdb] Write Protect is off
[ 2.705918] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.705946] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.708319] ata7.00: configured for UDMA/133
[ 2.708688] scsi 6:0:0:0: Direct-Access ATA INTEL SSDSC2BF24 TG21 PQ: 0 ANSI: 5
[ 2.709119] sd 6:0:0:0: [sdc] 468862128 512-byte logical blocks: (240 GB/224 GiB)
[ 2.709130] sd 6:0:0:0: [sdc] Write Protect is off
[ 2.709133] sd 6:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2.709144] sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.712064] sdc:
[ 2.712194] sd 6:0:0:0: [sdc] Attached SCSI disk
[ 2.724692] ixgbe 0000:03:00.0: MAC: 3, PHY: 0, PBA No: 000000-000
[ 2.724696] ixgbe 0000:03:00.0: 00:1e:67:d3:22:a8
[ 2.746239] sdb:
[ 2.746524] sd 5:0:0:0: [sdb] Attached SCSI disk
[ 2.875652] ixgbe 0000:03:00.0: Intel(R) 10 Gigabit Network Connection
[ 2.926612] tsc: Refined TSC clocksource calibration: 2095.165 MHz
[ 2.926665] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1e33591c888, max_idle_ns: 440795265648 ns
[ 2.926953] clocksource: Switched to clocksource tsc
[ 3.135394] ixgbe 0000:03:00.1: Multiqueue Enabled: Rx Queue count = 63, Tx Queue count = 63 XDP Queue count = 0
[ 3.220681] ixgbe 0000:03:00.1: 32.000 Gb/s available PCIe bandwidth (5.0 GT/s PCIe x8 link)
[ 3.245036] ixgbe 0000:03:00.1: MAC: 3, PHY: 0, PBA No: 000000-000
[ 3.245043] ixgbe 0000:03:00.1: 00:1e:67:d3:22:a9
[ 3.394896] ixgbe 0000:03:00.1: Intel(R) 10 Gigabit Network Connection
[ 3.395171] i40e: Intel(R) Ethernet Connection XL710 Network Driver
[ 3.395176] i40e: Copyright (c) 2013 - 2019 Intel Corporation.
[ 3.395381] ixgb: Intel(R) PRO/10GbE Network Driver
[ 3.395383] ixgb: Copyright (c) 1999-2008 Intel Corporation.
[ 3.395824] usbserial: usb_serial_init - registering generic driver failed
[ 3.395834] usbserial: usb_serial_init - returning with error -19
[ 3.396187] i8042: PNP: No PS/2 controller found.
[ 3.396651] input: PC Speaker as /devices/platform/pcspkr/input/input1
[ 3.396746] rtc_cmos 00:00: RTC can wake from S4
[ 3.397222] rtc_cmos 00:00: registered as rtc0
[ 3.397292] rtc_cmos 00:00: setting system clock to 2024-12-05T06:00:19 UTC (1733378419)
[ 3.397331] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram
[ 3.403331] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com
[ 3.403741] intel_pstate: Intel P-state driver initializing
[ 3.427482] sdhci: Secure Digital Host Controller Interface driver
[ 3.427484] sdhci: Copyright(c) Pierre Ossman
[ 3.427667] sdhci-pltfm: SDHCI platform and OF driver helper
[ 3.428066] u32 classifier
[ 3.428067] input device check on
[ 3.428086] Actions configured
[ 3.428446] NET: Registered PF_INET6 protocol family
[ 3.429789] Segment Routing with IPv6
[ 3.429798] In-situ OAM (IOAM) with IPv6
[ 3.429824] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 3.430124] NET: Registered PF_PACKET protocol family
[ 3.430149] lib80211: common routines for IEEE802.11 drivers
[ 3.430151] lib80211_crypt: registered algorithm 'NULL'
[ 3.430152] lib80211_crypt: registered algorithm 'WEP'
[ 3.430153] lib80211_crypt: registered algorithm 'CCMP'
[ 3.430155] lib80211_crypt: registered algorithm 'TKIP'
[ 3.430168] Key type dns_resolver registered
[ 3.430266] NET: Registered PF_VSOCK protocol family
[ 3.445455] mce: [Hardware Error]: Machine check events logged
[ 3.445459] mce: [Hardware Error]: Machine check events logged
[ 3.445549] microcode: sig=0x406f0, pf=0x1, revision=0x10
[ 3.449238] microcode: Microcode Update Driver: v2.2.
[ 3.454252] resctrl: L3 allocation detected
[ 3.454257] resctrl: L3 monitoring detected
[ 3.454265] IPI shorthand broadcast: enabled
[ 3.454309] sched_clock: Marking stable (3449626018, 4551283)->(4481075403, -1026898102)
[ 3.460206] printk: console [ttyS0]: printing thread started
[ 3.460240] registered taskstats version 1
[ 3.460241] Loading compiled-in X.509 certificates
[ 3.501450] Key type .fscrypt registered
[ 3.501453] Key type fscrypt-provisioning registered
[ 3.502352] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no
[ 3.503100] Key type encrypted registered
[ 3.503478] printk: console [netcon0]: printing thread started
[ 3.503483] printk: console [netcon0] enabled
[ 3.503485] netconsole: network logging started
[ 3.792993] pps pps0: new PPS source ptp0
[ 3.793070] ixgbe 0000:03:00.0: registered PHC device on eth0
[ 4.218232] pps pps1: new PPS source ptp1
[ 4.218311] ixgbe 0000:03:00.1: registered PHC device on eth1
[ 7.122783] ixgbe 0000:03:00.0 eth0: NIC Link is Up 1 Gbps, Flow Control: None
[ 7.126073] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 7.137670] Sending DHCP requests .., OK
[ 10.084712] IP-Config: Got DHCP answer from 128.224.178.20, my address is 128.224.178.30
[ 10.084720] IP-Config: Complete:
[ 10.084721] device=eth0, hwaddr=00:1e:67:d3:22:a8, ipaddr=128.224.178.30, mask=255.255.254.0, gw=128.224.178.1
[ 10.084726] host=SDP_Grantley_EP-2, domain=pek-tuxlab.wrs.com, nis-domain=(none)
[ 10.084729] bootserver=128.224.165.20, rootserver=128.224.165.20, rootpath=
[ 10.084732] nameserver0=128.224.160.11, nameserver1=147.11.100.30, nameserver2=147.11.1.11
[ 10.084738] ntpserver0=147.11.100.50
[ 10.085876] ixgbe 0000:03:00.1: removed PHC on eth1
[ 10.418696] clk: Disabling unused clocks
[ 10.418699] ALSA device list:
[ 10.418701] No soundcards found.
[ 10.418922] md: Waiting for all devices to be available before autodetect
[ 10.418923] md: If you don't use raid, use raid=noautodetect
[ 10.418925] md: Autodetecting RAID arrays.
[ 10.418926] md: autorun ...
[ 10.418927] md: ... autorun DONE.
[ 10.428087] VFS: Mounted root (nfs filesystem) on device 0:18.
[ 10.428278] devtmpfs: mounted
[ 10.431044] Freeing unused kernel image (initmem) memory: 2096K
[ 10.431196] Write protecting the kernel read-only data: 26624k
[ 10.432779] Freeing unused kernel image (text/rodata gap) memory: 2032K
[ 10.433308] Freeing unused kernel image (rodata/data gap) memory: 632K
[ 10.433381] Run /sbin/init as init process
[ 10.433382] with arguments:
[ 10.433383] /sbin/init
[ 10.433384] with environment:
[ 10.433384] HOME=/
[ 10.433385] TERM=linux
[ 10.553001] systemd[1]: systemd 250.5+ running in system mode (+PAM -AUDIT -SELINUX -APPARMOR +IMA -SMACK +SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -BZIP2 -LZ4 -XZ -ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=hybrid)
[ 10.564728] systemd[1]: Detected architecture x86-64.
[ 10.600114] systemd[1]: Hostname set to <intel-x86-64>.
[ 10.602751] systemd[1]: Initializing machine ID from random generator.
[ 10.653529] systemd[1126]: /lib/systemd/system-generators/systemd-gpt-auto-generator failed with exit status 1.
[ 10.935971] systemd[1]: Queued start job for default target Multi-User System.
[ 11.026944] systemd[1]: Created slice Slice /system/getty.
[ 11.028248] systemd[1]: Created slice Slice /system/modprobe.
[ 11.029453] systemd[1]: Created slice Slice /system/serial-getty.
[ 11.030652] systemd[1]: Created slice User and Session Slice.
[ 11.030729] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 11.030785] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 11.030810] systemd[1]: Reached target ceph target allowing to start/stop all ceph-immutable-object-cache@.service instances at once.
[ 11.030829] systemd[1]: Reached target ceph target allowing to start/stop all ceph-mon@.service instances at once.
[ 11.030843] systemd[1]: Reached target ceph target allowing to start/stop all ceph-mds@.service instances at once.
[ 11.030851] systemd[1]: Reached target ceph target allowing to start/stop all ceph-mgr@.service instances at once.
[ 11.030862] systemd[1]: Reached target ceph target allowing to start/stop all ceph-osd@.service instances at once.
[ 11.030871] systemd[1]: Reached target ceph target allowing to start/stop all ceph-radosgw@.service instances at once.
[ 11.030882] systemd[1]: Reached target ceph target allowing to start/stop all ceph-rbd-mirror@.service instances at once.
[ 11.030919] systemd[1]: Reached target Path Units.
[ 11.030941] systemd[1]: Reached target Slice Units.
[ 11.030958] systemd[1]: Reached target Swaps.
[ 11.030977] systemd[1]: Reached target Libvirt guests shutdown.
[ 11.031974] systemd[1]: Listening on RPCbind Server Activation Socket.
[ 11.031994] systemd[1]: Reached target RPC Port Mapper.
[ 11.032510] systemd[1]: Listening on Syslog Socket.
[ 11.032605] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 11.050031] systemd[1]: Journal Audit Socket was skipped because of a failed condition check (ConditionSecurity=audit).
[ 11.050351] systemd[1]: Listening on Journal Socket (/dev/log).
[ 11.050493] systemd[1]: Listening on Journal Socket.
[ 11.050892] systemd[1]: Listening on Network Service Netlink Socket.
[ 11.051804] systemd[1]: Listening on udev Control Socket.
[ 11.051912] systemd[1]: Listening on udev Kernel Socket.
[ 11.052252] systemd[1]: Listening on User Database Manager Socket.
[ 11.053977] systemd[1]: Mounting Huge Pages File System...
[ 11.055838] systemd[1]: Mounting POSIX Message Queue File System...
[ 11.057625] systemd[1]: Mounting Kernel Debug File System...
[ 11.059422] systemd[1]: Mounting Kernel Trace File System...
[ 11.062384] systemd[1]: Mounting Temporary Directory /tmp...
[ 11.064860] systemd[1]: Starting Create List of Static Device Nodes...
[ 11.066455] systemd[1]: Starting Load Kernel Module configfs...
[ 11.067920] systemd[1]: Starting Load Kernel Module drm...
[ 11.069378] systemd[1]: Starting Load Kernel Module fuse...
[ 11.072461] systemd[1]: Starting RPC Bind...
[ 11.072762] systemd[1]: File System Check on Root Device was skipped because of a failed condition check (ConditionPathIsReadWrite=!/).
[ 11.072979] systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling.
[ 11.072982] systemd[1]: (This warning is only shown for the first unit using IP firewalling.)
[ 11.075089] systemd[1]: Starting Journal Service...
[ 11.078880] systemd[1]: Starting Load Kernel Modules...
[ 11.080315] fuse: init (API version 7.34)
[ 11.080697] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 11.082426] systemd[1]: Starting Coldplug All udev Devices...
[ 11.084118] systemd[1]: Mounted Huge Pages File System.
[ 11.084226] systemd[1]: Mounted POSIX Message Queue File System.
[ 11.084324] systemd[1]: Mounted Kernel Debug File System.
[ 11.084426] systemd[1]: Mounted Kernel Trace File System.
[ 11.084515] systemd[1]: Mounted Temporary Directory /tmp.
[ 11.084910] systemd[1]: Finished Create List of Static Device Nodes.
[ 11.085166] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[ 11.085385] systemd[1]: Finished Load Kernel Module configfs.
[ 11.085645] systemd[1]: modprobe@drm.service: Deactivated successfully.
[ 11.085859] systemd[1]: Finished Load Kernel Module drm.
[ 11.086098] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[ 11.086304] systemd[1]: Finished Load Kernel Module fuse.
[ 11.088115] systemd[1]: Mounting FUSE Control File System...
[ 11.089895] systemd[1]: Mounting Kernel Configuration File System...
[ 11.095692] systemd[1]: Mounted FUSE Control File System.
[ 11.097089] systemd[1]: Mounted Kernel Configuration File System.
[ 11.103484] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 11.105621] systemd[1]: Rebuild Hardware Database was skipped because all trigger condition checks failed.
[ 11.105677] systemd[1]: Platform Persistent Storage Archival was skipped because of a failed condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore).
[ 11.108122] systemd[1]: Starting Create System Users...
[ 11.108321] systemd[1]: Started RPC Bind.
[ 11.150872] systemd[1]: Finished Create System Users.
[ 11.153016] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 11.171569] openvswitch: Open vSwitch switching datapath
[ 11.173142] systemd[1]: Finished Load Kernel Modules.
[ 11.175027] systemd[1]: Starting Apply Kernel Variables...
[ 11.192279] systemd[1]: Finished Create Static Device Nodes in /dev.
[ 11.192362] systemd[1]: Reached target Preparation for Local File Systems.
[ 11.194702] systemd[1]: Starting Rule-based Manager for Device Events and Files...
[ 11.199578] systemd[1]: Finished Apply Kernel Variables.
[ 11.222104] systemd[1]: Started Journal Service.
[ 11.233691] systemd-journald[1161]: Received client request to flush runtime journal.
[ 11.442810] mgag200 0000:07:00.0: vgaarb: deactivate vga console
[ 11.450389] Console: switching to colour dummy device 80x25
[ 11.459180] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 11.460314] i2c i2c-1: 8/24 memory slots populated (from DMI)
[ 11.460317] i2c i2c-1: Systems with more than 4 memory slots not supported yet, not instantiating SPD
[ 11.460344] [drm] Initialized mgag200 1.0.0 20110418 for 0000:07:00.0 on minor 0
[ 11.468069] cryptd: max_cpu_qlen set to 1000
[ 11.478985] power_meter ACPI000D:00: Found ACPI power meter.
[ 11.479084] power_meter ACPI000D:00: Ignoring unsafe software power cap!
[ 11.479093] power_meter ACPI000D:00: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 11.495505] AVX2 version of gcm_enc/dec engaged.
[ 11.495621] AES CTR mode by8 optimization enabled
[ 11.498328] fbcon: mgag200drmfb (fb0) is primary device
[ 11.500956] mgag200 0000:07:00.0: [drm] drm_plane_enable_fb_damage_clips() not called
[ 11.608947] Console: switching to colour frame buffer device 160x64
[ 11.646364] mgag200 0000:07:00.0: [drm] fb0: mgag200drmfb frame buffer device
[ 11.658006] iTCO_vendor_support: vendor-support=0
[ 11.806035] iTCO_wdt iTCO_wdt.1.auto: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
[ 12.137185] EDAC DEBUG: sbridge_init:
[ 12.137189] EDAC sbridge: Seeking for: PCI ID 8086:6fa0
[ 12.137209] EDAC DEBUG: sbridge_get_onedevice: Detected 8086:6fa0
[ 12.137210] EDAC sbridge: Seeking for: PCI ID 8086:6fa0
[ 12.137227] EDAC DEBUG: sbridge_get_onedevice: Detected 8086:6fa0
[ 12.137228] EDAC sbridge: Seeking for: PCI ID 8086:6fa0
[ 12.137244] EDAC sbridge: Seeking for: PCI ID 8086:6f60
[ 12.137251] EDAC DEBUG: sbridge_get_onedevice: Detected 8086:6f60
[ 12.137252] EDAC sbridge: Seeking for: PCI ID 8086:6f60
[ 12.137260] EDAC DEBUG: sbridge_get_onedevice: Detected 8086:6f60
[ 12.137261] EDAC sbridge: Seeking for: PCI ID 8086:6f60
[ 12.137266] EDAC sbridge: Seeking for: PCI ID 8086:6fa8
[ 12.137273] EDAC DEBUG: sbridge_get_onedevice: Detected 8086:6fa8
[ 12.137274] EDAC sbridge: Seeking for: PCI ID 8086:6fa8
[ 12.137281] EDAC DEBUG: sbridge_get_onedevice: Detected 8086:6fa8
[ 12.137283] EDAC sbridge: Seeking for: PCI ID 8086:6fa8
[ 12.137287] EDAC sbridge: Seeking for: PCI ID 8086:6f71
[ 12.137294] EDAC DEBUG: sbridge_get_onedevice: Detected 8086:6f71
[ 12.137294] EDAC sbridge: Seeking for: PCI ID 8086:6f71
[ 12.137302] EDAC DEBUG: sbridge_get_onedevice: Detected 8086:6f71
[ 12.137303] EDAC sbridge: Seeking for: PCI ID 8086:6f71
[ 12.137308] EDAC sbridge: Seeking for: PCI ID 8086:6faa
[ 12.137314] EDAC DEBUG: sbridge_get_onedevice: Detected 8086:6faa
[ 12.137315] EDAC sbridge: Seeking for: PCI ID 8086:6faa
[ 12.137323] EDAC DEBUG: sbridge_get_onedevice: Detected 8086:6faa
[ 12.137324] EDAC sbridge: Seeking for: PCI ID 8086:6faa
[ 12.137329] EDAC sbridge: Seeking for: PCI ID 8086:6fab
[ 12.137335] EDAC DEBUG: sbridge_get_onedevice: Detected 8086:6fab
[ 12.137336] EDAC sbridge: Seeking for: PCI ID 8086:6fab
[ 12.137344] EDAC DEBUG: sbridge_get_onedevice: Detected 8086:6fab
[ 12.137345] EDAC sbridge: Seeking for: PCI ID 8086:6fab
[ 12.137349] EDAC sbridge: Seeking for: PCI ID 8086:6fac
[ 12.137363] EDAC sbridge: Seeking for: PCI ID 8086:6fad
[ 12.137377] EDAC sbridge: Seeking for: PCI ID 8086:6f68
[ 12.137384] EDAC DEBUG: sbridge_get_onedevice: Detected 8086:6f68
[ 12.137385] EDAC sbridge: Seeking for: PCI ID 8086:6f68
[ 12.137392] EDAC DEBUG: sbridge_get_onedevice: Detected 8086:6f68
[ 12.137393] EDAC sbridge: Seeking for: PCI ID 8086:6f68
[ 12.137398] EDAC sbridge: Seeking for: PCI ID 8086:6f79
[ 12.137405] EDAC DEBUG: sbridge_get_onedevice: Detected 8086:6f79
[ 12.137406] EDAC sbridge: Seeking for: PCI ID 8086:6f79
[ 12.137414] EDAC DEBUG: sbridge_get_onedevice: Detected 8086:6f79
[ 12.137415] EDAC sbridge: Seeking for: PCI ID 8086:6f79
[ 12.137419] EDAC sbridge: Seeking for: PCI ID 8086:6f6a
[ 12.137426] EDAC DEBUG: sbridge_get_onedevice: Detected 8086:6f6a
[ 12.137427] EDAC sbridge: Seeking for: PCI ID 8086:6f6a
[ 12.137435] EDAC DEBUG: sbridge_get_onedevice: Detected 8086:6f6a
[ 12.137436] EDAC sbridge: Seeking for: PCI ID 8086:6f6a
[ 12.137440] EDAC sbridge: Seeking for: PCI ID 8086:6f6b
[ 12.137447] EDAC DEBUG: sbridge_get_onedevice: Detected 8086:6f6b
[ 12.137448] EDAC sbridge: Seeking for: PCI ID 8086:6f6b
[ 12.137455] EDAC DEBUG: sbridge_get_onedevice: Detected 8086:6f6b
[ 12.137456] EDAC sbridge: Seeking for: PCI ID 8086:6f6b
[ 12.137460] EDAC sbridge: Seeking for: PCI ID 8086:6f6c
[ 12.137474] EDAC sbridge: Seeking for: PCI ID 8086:6f6d
[ 12.137487] EDAC sbridge: Seeking for: PCI ID 8086:6ffc
[ 12.137493] EDAC DEBUG: sbridge_get_onedevice: Detected 8086:6ffc
[ 12.137494] EDAC sbridge: Seeking for: PCI ID 8086:6ffc
[ 12.137501] EDAC DEBUG: sbridge_get_onedevice: Detected 8086:6ffc
[ 12.137502] EDAC sbridge: Seeking for: PCI ID 8086:6ffc
[ 12.137508] EDAC sbridge: Seeking for: PCI ID 8086:6ffd
[ 12.137514] EDAC DEBUG: sbridge_get_onedevice: Detected 8086:6ffd
[ 12.137515] EDAC sbridge: Seeking for: PCI ID 8086:6ffd
[ 12.137523] EDAC DEBUG: sbridge_get_onedevice: Detected 8086:6ffd
[ 12.137524] EDAC sbridge: Seeking for: PCI ID 8086:6ffd
[ 12.137530] EDAC sbridge: Seeking for: PCI ID 8086:6faf
[ 12.137536] EDAC DEBUG: sbridge_get_onedevice: Detected 8086:6faf
[ 12.137537] EDAC sbridge: Seeking for: PCI ID 8086:6faf
[ 12.137545] EDAC DEBUG: sbridge_get_onedevice: Detected 8086:6faf
[ 12.137546] EDAC sbridge: Seeking for: PCI ID 8086:6faf
[ 12.137550] EDAC DEBUG: sbridge_probe: Registering MC#0 (1 of 4)
[ 12.137573] EDAC DEBUG: edac_mc_alloc: allocating 2576 bytes for mci data (18 dimms, 18 csrows/channels)
[ 12.137597] EDAC DEBUG: sbridge_register_mci: MC: mci = 00000000c86f7a81, dev = 0000000081ea8d1e
[ 12.137611] EDAC DEBUG: broadwell_mci_bind_devs: Associated PCI ff.18.0 with dev = 000000009471403c
[ 12.137613] EDAC DEBUG: broadwell_mci_bind_devs: Associated PCI ff.19.0 with dev = 00000000ffbba7ea
[ 12.137615] EDAC DEBUG: broadwell_mci_bind_devs: Associated PCI ff.19.1 with dev = 0000000000763b7c
[ 12.137616] EDAC DEBUG: broadwell_mci_bind_devs: Associated PCI ff.19.2 with dev = 00000000fba51f60
[ 12.137618] EDAC DEBUG: broadwell_mci_bind_devs: Associated PCI ff.19.3 with dev = 0000000049664649
[ 12.137620] EDAC DEBUG: broadwell_mci_bind_devs: Associated PCI ff.15.4 with dev = 00000000194d215e
[ 12.137621] EDAC DEBUG: broadwell_mci_bind_devs: Associated PCI ff.15.5 with dev = 000000000c521c04
[ 12.137623] EDAC DEBUG: broadwell_mci_bind_devs: Associated PCI ff.19.7 with dev = 000000003f33f221
[ 12.137627] EDAC DEBUG: get_dimm_config: mc#0: Node ID: 1, source ID: 1
[ 12.137629] EDAC DEBUG: get_dimm_config: Memory mirroring is disabled
[ 12.137630] EDAC DEBUG: get_dimm_config: Lockstep is disabled
[ 12.137631] EDAC DEBUG: get_dimm_config: address map is on open page mode
[ 12.137633] EDAC DEBUG: __populate_dimms: Memory is registered
[ 12.137634] EDAC DEBUG: __populate_dimms: mc#0: ha 0 channel 0, dimm 0, 8192 MiB (2097152 pages) bank: 16, rank: 1, row: 0x10000, col: 0x400
[ 12.137639] EDAC DEBUG: __populate_dimms: mc#0: ha 0 channel 1, dimm 0, 8192 MiB (2097152 pages) bank: 16, rank: 1, row: 0x10000, col: 0x400
[ 12.137644] EDAC DEBUG: get_memory_layout: TOLM: 2.000 GB (0x000000007fffffff)
[ 12.137646] EDAC DEBUG: get_memory_layout: TOHM: 66.000 GB (0x000000107fffffff)
[ 12.137648] EDAC DEBUG: get_memory_layout: SAD#0 DRAM up to 34.000 GB (0x0000000880000000) Interleave: [8:6]XOR[18:16] reg=0x040087c1
[ 12.137651] EDAC DEBUG: get_memory_layout: SAD#0, interleave #0: 0
[ 12.137653] EDAC DEBUG: get_memory_layout: SAD#1 DRAM up to 66.000 GB (0x0000001080000000) Interleave: [8:6]XOR[18:16] reg=0x040107c1
[ 12.137655] EDAC DEBUG: get_memory_layout: SAD#1, interleave #0: 1
[ 12.137664] EDAC DEBUG: get_memory_layout: TAD#0: up to 66.000 GB (0x0000001080000000), socket interleave 2, memory interleave 2, TGT: 0, 1, 0, 0, reg=0x0041f504
[ 12.137668] EDAC DEBUG: get_memory_layout: TAD CH#0, offset #0: 34.000 GB (0x0000000880000000), reg=0x00008800
[ 12.137670] EDAC DEBUG: get_memory_layout: TAD CH#1, offset #0: 34.000 GB (0x0000000880000000), reg=0x00008800
[ 12.137672] EDAC DEBUG: get_memory_layout: CH#0 RIR#0, limit: 7.999 GB (0x00000001fff00000), way: 1, reg=0x8000001e
[ 12.137674] EDAC DEBUG: get_memory_layout: CH#0 RIR#0 INTL#0, offset 0.000 GB (0x0000000000000000), tgt: 0, reg=0x00000000
[ 12.137677] EDAC DEBUG: get_memory_layout: CH#1 RIR#0, limit: 7.999 GB (0x00000001fff00000), way: 1, reg=0x8000001e
[ 12.137679] EDAC DEBUG: get_memory_layout: CH#1 RIR#0 INTL#0, offset 0.000 GB (0x0000000000000000), tgt: 0, reg=0x00000000
[ 12.137682] EDAC DEBUG: edac_mc_add_mc_with_groups:
[ 12.137707] EDAC DEBUG: edac_create_sysfs_mci_device: device mc0 created
[ 12.137725] EDAC DEBUG: edac_create_dimm_object: device dimm0 created at location channel 0 slot 0
[ 12.137742] EDAC DEBUG: edac_create_dimm_object: device dimm3 created at location channel 1 slot 0
[ 12.137763] EDAC DEBUG: edac_create_csrow_object: device csrow0 created
[ 12.137786] EDAC MC0: Giving out device to module sb_edac controller Broadwell SrcID#1_Ha#0: DEV 0000:ff:12.0 (INTERRUPT)
[ 12.137788] EDAC DEBUG: sbridge_probe: Registering MC#1 (2 of 4)
[ 12.137789] EDAC DEBUG: edac_mc_alloc: allocating 2576 bytes for mci data (18 dimms, 18 csrows/channels)
[ 12.137815] EDAC DEBUG: sbridge_register_mci: MC: mci = 0000000091cbef60, dev = 00000000b84a6b61
[ 12.137828] EDAC DEBUG: broadwell_mci_bind_devs: Associated PCI 7f.18.0 with dev = 00000000801999ca
[ 12.137830] EDAC DEBUG: broadwell_mci_bind_devs: Associated PCI 7f.19.0 with dev = 00000000d0e7bf7d
[ 12.137831] EDAC DEBUG: broadwell_mci_bind_devs: Associated PCI 7f.19.1 with dev = 00000000b906d457
[ 12.137833] EDAC DEBUG: broadwell_mci_bind_devs: Associated PCI 7f.19.2 with dev = 0000000036562947
[ 12.137834] EDAC DEBUG: broadwell_mci_bind_devs: Associated PCI 7f.19.3 with dev = 00000000add9f2e6
[ 12.137835] EDAC DEBUG: broadwell_mci_bind_devs: Associated PCI 7f.15.4 with dev = 000000001cf45910
[ 12.137836] EDAC DEBUG: broadwell_mci_bind_devs: Associated PCI 7f.15.5 with dev = 00000000e8ba5532
[ 12.137838] EDAC DEBUG: broadwell_mci_bind_devs: Associated PCI 7f.19.7 with dev = 00000000bfab36c6
[ 12.137841] EDAC DEBUG: get_dimm_config: mc#1: Node ID: 0, source ID: 0
[ 12.137843] EDAC DEBUG: get_dimm_config: Memory mirroring is disabled
[ 12.137844] EDAC DEBUG: get_dimm_config: Lockstep is disabled
[ 12.137845] EDAC DEBUG: get_dimm_config: address map is on open page mode
[ 12.137846] EDAC DEBUG: __populate_dimms: Memory is registered
[ 12.137847] EDAC DEBUG: __populate_dimms: mc#1: ha 0 channel 0, dimm 0, 8192 MiB (2097152 pages) bank: 16, rank: 1, row: 0x10000, col: 0x400
[ 12.137851] EDAC DEBUG: __populate_dimms: mc#1: ha 0 channel 1, dimm 0, 8192 MiB (2097152 pages) bank: 16, rank: 1, row: 0x10000, col: 0x400
[ 12.137855] EDAC DEBUG: get_memory_layout: TOLM: 2.000 GB (0x000000007fffffff)
[ 12.137857] EDAC DEBUG: get_memory_layout: TOHM: 66.000 GB (0x000000107fffffff)
[ 12.137859] EDAC DEBUG: get_memory_layout: SAD#0 DRAM up to 34.000 GB (0x0000000880000000) Interleave: [8:6]XOR[18:16] reg=0x040087c1
[ 12.137861] EDAC DEBUG: get_memory_layout: SAD#0, interleave #0: 0
[ 12.137862] EDAC DEBUG: get_memory_layout: SAD#1 DRAM up to 66.000 GB (0x0000001080000000) Interleave: [8:6]XOR[18:16] reg=0x040107c1
[ 12.137864] EDAC DEBUG: get_memory_layout: SAD#1, interleave #0: 1
[ 12.137872] EDAC DEBUG: get_memory_layout: TAD#0: up to 2.000 GB (0x0000000080000000), socket interleave 2, memory interleave 2, TGT: 0, 1, 0, 0, reg=0x0001f504
[ 12.137875] EDAC DEBUG: get_memory_layout: TAD#1: up to 34.000 GB (0x0000000880000000), socket interleave 2, memory interleave 2, TGT: 0, 1, 0, 0, reg=0x0021f504
[ 12.137878] EDAC DEBUG: get_memory_layout: TAD CH#0, offset #0: 0.000 GB (0x0000000000000000), reg=0x00000000
[ 12.137880] EDAC DEBUG: get_memory_layout: TAD CH#0, offset #1: 2.000 GB (0x0000000080000000), reg=0x00000800
[ 12.137882] EDAC DEBUG: get_memory_layout: TAD CH#1, offset #0: 0.000 GB (0x0000000000000000), reg=0x00000000
[ 12.137883] EDAC DEBUG: get_memory_layout: TAD CH#1, offset #1: 2.000 GB (0x0000000080000000), reg=0x00000800
[ 12.137885] EDAC DEBUG: get_memory_layout: CH#0 RIR#0, limit: 7.999 GB (0x00000001fff00000), way: 1, reg=0x8000001e
[ 12.137887] EDAC DEBUG: get_memory_layout: CH#0 RIR#0 INTL#0, offset 0.000 GB (0x0000000000000000), tgt: 0, reg=0x00000000
[ 12.137890] EDAC DEBUG: get_memory_layout: CH#1 RIR#0, limit: 7.999 GB (0x00000001fff00000), way: 1, reg=0x8000001e
[ 12.137891] EDAC DEBUG: get_memory_layout: CH#1 RIR#0 INTL#0, offset 0.000 GB (0x0000000000000000), tgt: 0, reg=0x00000000
[ 12.137893] EDAC DEBUG: edac_mc_add_mc_with_groups:
[ 12.137911] EDAC DEBUG: edac_create_sysfs_mci_device: device mc1 created
[ 12.137927] EDAC DEBUG: edac_create_dimm_object: device dimm0 created at location channel 0 slot 0
[ 12.137944] EDAC DEBUG: edac_create_dimm_object: device dimm3 created at location channel 1 slot 0
[ 12.137962] EDAC DEBUG: edac_create_csrow_object: device csrow0 created
[ 12.137979] EDAC MC1: Giving out device to module sb_edac controller Broadwell SrcID#0_Ha#0: DEV 0000:7f:12.0 (INTERRUPT)
[ 12.137980] EDAC DEBUG: sbridge_probe: Registering MC#2 (3 of 4)
[ 12.137981] EDAC DEBUG: edac_mc_alloc: allocating 2576 bytes for mci data (18 dimms, 18 csrows/channels)
[ 12.138008] EDAC DEBUG: sbridge_register_mci: MC: mci = 00000000607198d6, dev = 0000000072410c50
[ 12.138020] EDAC DEBUG: broadwell_mci_bind_devs: Associated PCI ff.18.4 with dev = 000000005abb1f2f
[ 12.138022] EDAC DEBUG: broadwell_mci_bind_devs: Associated PCI ff.22.0 with dev = 00000000029b2d9f
[ 12.138024] EDAC DEBUG: broadwell_mci_bind_devs: Associated PCI ff.22.1 with dev = 000000004197abd0
[ 12.138025] EDAC DEBUG: broadwell_mci_bind_devs: Associated PCI ff.22.2 with dev = 000000009ee0e59d
[ 12.138026] EDAC DEBUG: broadwell_mci_bind_devs: Associated PCI ff.22.3 with dev = 00000000fcf12a35
[ 12.138027] EDAC DEBUG: broadwell_mci_bind_devs: Associated PCI ff.15.4 with dev = 00000000194d215e
[ 12.138028] EDAC DEBUG: broadwell_mci_bind_devs: Associated PCI ff.15.5 with dev = 000000000c521c04
[ 12.138030] EDAC DEBUG: broadwell_mci_bind_devs: Associated PCI ff.19.7 with dev = 000000003f33f221
[ 12.138032] EDAC DEBUG: get_dimm_config: mc#2: Node ID: 1, source ID: 1
[ 12.138034] EDAC DEBUG: get_dimm_config: Memory mirroring is disabled
[ 12.138036] EDAC DEBUG: get_dimm_config: Lockstep is disabled
[ 12.138036] EDAC DEBUG: get_dimm_config: address map is on open page mode
[ 12.138038] EDAC DEBUG: __populate_dimms: Memory is registered
[ 12.138039] EDAC DEBUG: __populate_dimms: mc#2: ha 1 channel 0, dimm 0, 8192 MiB (2097152 pages) bank: 16, rank: 1, row: 0x10000, col: 0x400
[ 12.138044] EDAC DEBUG: __populate_dimms: mc#2: ha 1 channel 1, dimm 0, 8192 MiB (2097152 pages) bank: 16, rank: 1, row: 0x10000, col: 0x400
[ 12.138047] EDAC DEBUG: get_memory_layout: TOLM: 2.000 GB (0x000000007fffffff)
[ 12.138049] EDAC DEBUG: get_memory_layout: TOHM: 66.000 GB (0x000000107fffffff)
[ 12.138051] EDAC DEBUG: get_memory_layout: SAD#0 DRAM up to 34.000 GB (0x0000000880000000) Interleave: [8:6]XOR[18:16] reg=0x040087c1
[ 12.138053] EDAC DEBUG: get_memory_layout: SAD#0, interleave #0: 0
[ 12.138055] EDAC DEBUG: get_memory_layout: SAD#1 DRAM up to 66.000 GB (0x0000001080000000) Interleave: [8:6]XOR[18:16] reg=0x040107c1
[ 12.138057] EDAC DEBUG: get_memory_layout: SAD#1, interleave #0: 1
[ 12.138066] EDAC DEBUG: get_memory_layout: TAD#0: up to 66.000 GB (0x0000001080000000), socket interleave 2, memory interleave 2, TGT: 0, 1, 0, 0, reg=0x0041f504
[ 12.138069] EDAC DEBUG: get_memory_layout: TAD CH#0, offset #0: 34.000 GB (0x0000000880000000), reg=0x00008800
[ 12.138071] EDAC DEBUG: get_memory_layout: TAD CH#1, offset #0: 34.000 GB (0x0000000880000000), reg=0x00008800
[ 12.138073] EDAC DEBUG: get_memory_layout: CH#0 RIR#0, limit: 7.999 GB (0x00000001fff00000), way: 1, reg=0x8000001e
[ 12.138075] EDAC DEBUG: get_memory_layout: CH#0 RIR#0 INTL#0, offset 0.000 GB (0x0000000000000000), tgt: 0, reg=0x00000000
[ 12.138078] EDAC DEBUG: get_memory_layout: CH#1 RIR#0, limit: 7.999 GB (0x00000001fff00000), way: 1, reg=0x8000001e
[ 12.138079] EDAC DEBUG: get_memory_layout: CH#1 RIR#0 INTL#0, offset 0.000 GB (0x0000000000000000), tgt: 0, reg=0x00000000
[ 12.138082] EDAC DEBUG: edac_mc_add_mc_with_groups:
[ 12.138098] EDAC DEBUG: edac_create_sysfs_mci_device: device mc2 created
[ 12.138115] EDAC DEBUG: edac_create_dimm_object: device dimm0 created at location channel 0 slot 0
[ 12.138132] EDAC DEBUG: edac_create_dimm_object: device dimm3 created at location channel 1 slot 0
[ 12.138150] EDAC DEBUG: edac_create_csrow_object: device csrow0 created
[ 12.138166] EDAC MC2: Giving out device to module sb_edac controller Broadwell SrcID#1_Ha#1: DEV 0000:ff:12.4 (INTERRUPT)
[ 12.138168] EDAC DEBUG: sbridge_probe: Registering MC#3 (4 of 4)
[ 12.138168] EDAC DEBUG: edac_mc_alloc: allocating 2576 bytes for mci data (18 dimms, 18 csrows/channels)
[ 12.138195] EDAC DEBUG: sbridge_register_mci: MC: mci = 0000000096c9948f, dev = 000000006f8c6147
[ 12.138208] EDAC DEBUG: broadwell_mci_bind_devs: Associated PCI 7f.18.4 with dev = 000000000ff194e3
[ 12.138209] EDAC DEBUG: broadwell_mci_bind_devs: Associated PCI 7f.22.0 with dev = 00000000103440bb
[ 12.138211] EDAC DEBUG: broadwell_mci_bind_devs: Associated PCI 7f.22.1 with dev = 00000000f3a7e986
[ 12.138212] EDAC DEBUG: broadwell_mci_bind_devs: Associated PCI 7f.22.2 with dev = 000000006c0c63fd
[ 12.138213] EDAC DEBUG: broadwell_mci_bind_devs: Associated PCI 7f.22.3 with dev = 00000000b3c11ca1
[ 12.138214] EDAC DEBUG: broadwell_mci_bind_devs: Associated PCI 7f.15.4 with dev = 000000001cf45910
[ 12.138215] EDAC DEBUG: broadwell_mci_bind_devs: Associated PCI 7f.15.5 with dev = 00000000e8ba5532
[ 12.138216] EDAC DEBUG: broadwell_mci_bind_devs: Associated PCI 7f.19.7 with dev = 00000000bfab36c6
[ 12.138219] EDAC DEBUG: get_dimm_config: mc#3: Node ID: 0, source ID: 0
[ 12.138221] EDAC DEBUG: get_dimm_config: Memory mirroring is disabled
[ 12.138222] EDAC DEBUG: get_dimm_config: Lockstep is disabled
[ 12.138223] EDAC DEBUG: get_dimm_config: address map is on open page mode
[ 12.138224] EDAC DEBUG: __populate_dimms: Memory is registered
[ 12.138225] EDAC DEBUG: __populate_dimms: mc#3: ha 1 channel 0, dimm 0, 8192 MiB (2097152 pages) bank: 16, rank: 1, row: 0x10000, col: 0x400
[ 12.138229] EDAC DEBUG: __populate_dimms: mc#3: ha 1 channel 1, dimm 0, 8192 MiB (2097152 pages) bank: 16, rank: 1, row: 0x10000, col: 0x400
[ 12.138233] EDAC DEBUG: get_memory_layout: TOLM: 2.000 GB (0x000000007fffffff)
[ 12.138235] EDAC DEBUG: get_memory_layout: TOHM: 66.000 GB (0x000000107fffffff)
[ 12.138237] EDAC DEBUG: get_memory_layout: SAD#0 DRAM up to 34.000 GB (0x0000000880000000) Interleave: [8:6]XOR[18:16] reg=0x040087c1
[ 12.138239] EDAC DEBUG: get_memory_layout: SAD#0, interleave #0: 0
[ 12.138240] EDAC DEBUG: get_memory_layout: SAD#1 DRAM up to 66.000 GB (0x0000001080000000) Interleave: [8:6]XOR[18:16] reg=0x040107c1
[ 12.138242] EDAC DEBUG: get_memory_layout: SAD#1, interleave #0: 1
[ 12.138250] EDAC DEBUG: get_memory_layout: TAD#0: up to 2.000 GB (0x0000000080000000), socket interleave 2, memory interleave 2, TGT: 0, 1, 0, 0, reg=0x0001f504
[ 12.138253] EDAC DEBUG: get_memory_layout: TAD#1: up to 34.000 GB (0x0000000880000000), socket interleave 2, memory interleave 2, TGT: 0, 1, 0, 0, reg=0x0021f504
[ 12.138256] EDAC DEBUG: get_memory_layout: TAD CH#0, offset #0: 0.000 GB (0x0000000000000000), reg=0x00000000
[ 12.138258] EDAC DEBUG: get_memory_layout: TAD CH#0, offset #1: 2.000 GB (0x0000000080000000), reg=0x00000800
[ 12.138260] EDAC DEBUG: get_memory_layout: TAD CH#1, offset #0: 0.000 GB (0x0000000000000000), reg=0x00000000
[ 12.138262] EDAC DEBUG: get_memory_layout: TAD CH#1, offset #1: 2.000 GB (0x0000000080000000), reg=0x00000800
[ 12.138263] EDAC DEBUG: get_memory_layout: CH#0 RIR#0, limit: 7.999 GB (0x00000001fff00000), way: 1, reg=0x8000001e
[ 12.138265] EDAC DEBUG: get_memory_layout: CH#0 RIR#0 INTL#0, offset 0.000 GB (0x0000000000000000), tgt: 0, reg=0x00000000
[ 12.138268] EDAC DEBUG: get_memory_layout: CH#1 RIR#0, limit: 7.999 GB (0x00000001fff00000), way: 1, reg=0x8000001e
[ 12.138269] EDAC DEBUG: get_memory_layout: CH#1 RIR#0 INTL#0, offset 0.000 GB (0x0000000000000000), tgt: 0, reg=0x00000000
[ 12.138271] EDAC DEBUG: edac_mc_add_mc_with_groups:
[ 12.138289] EDAC DEBUG: edac_create_sysfs_mci_device: device mc3 created
[ 12.138305] EDAC DEBUG: edac_create_dimm_object: device dimm0 created at location channel 0 slot 0
[ 12.138321] EDAC DEBUG: edac_create_dimm_object: device dimm3 created at location channel 1 slot 0
[ 12.138339] EDAC DEBUG: edac_create_csrow_object: device csrow0 created
[ 12.138355] EDAC MC3: Giving out device to module sb_edac controller Broadwell SrcID#0_Ha#1: DEV 0000:7f:12.4 (INTERRUPT)
[ 12.138357] EDAC sbridge: Ver: 1.1.2
[ 12.156424] intel_rapl_common: Found RAPL domain package
[ 12.156430] intel_rapl_common: Found RAPL domain dram
[ 12.156435] intel_rapl_common: DRAM domain energy unit 15300pj
[ 12.156822] intel_rapl_common: Found RAPL domain package
[ 12.156828] intel_rapl_common: Found RAPL domain dram
[ 12.156832] intel_rapl_common: DRAM domain energy unit 15300pj
[ 12.242383] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled.
[ 12.782106] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 12.790880] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 12.791172] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[ 13.093265] 8021q: 802.1Q VLAN Support v1.8
[ 13.093280] 8021q: adding VLAN 0 to HW filter on device eth0
[ 13.618006] pps pps1: new PPS source ptp1
[ 13.618059] ixgbe 0000:03:00.1: registered PHC device on eth1
[ 13.739828] 8021q: adding VLAN 0 to HW filter on device eth1
[ 15.731878] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
next parent reply other threads:[~2024-12-05 7:45 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CO1PR11MB50095A17BDA81F6A4BC490C5F1372@CO1PR11MB5009.namprd11.prod.outlook.com>
[not found] ` <SJ1PR11MB608368A4CCDF7E43AFE4A866FC372@SJ1PR11MB6083.namprd11.prod.outlook.com>
2024-12-05 7:44 ` Yu, Mingli [this message]
2025-01-02 6:02 ` Yu, Mingli
2025-01-02 6:10 ` Yu, Mingli
2024-12-04 8:11 Yu, Mingli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=fdc0ceef-7dc1-424e-9bed-444e8c06c4f0@windriver.com \
--to=mingli.yu@windriver.com \
--cc=Zhe.He@windriver.com \
--cc=bp@alien8.de \
--cc=dave.hansen@linux.intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@redhat.com \
--cc=tglx@linutronix.de \
--cc=tony.luck@intel.com \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®