From: Sevak Arakelyan <SEVAK.ARAKELYAN@synopsys.com>
To: John Youn <John.Youn@synopsys.com>,
Felipe Balbi <balbi@kernel.org>,
"Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
<linux-usb@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Cc: Sevak Arakelyan <SEVAK.ARAKELYAN@synopsys.com>
Subject: [PATCH 1/9] usb: dwc2: Fix GLPMCFG... definitions
Date: Fri, 28 Apr 2017 12:47:53 +0400 [thread overview]
Message-ID: <fe0babc6e72bfdf9254636efe907c05e2396634b.1493369198.git.sevaka@synopsys.com> (raw)
In-Reply-To: <cover.1493369198.git.sevaka@synopsys.com>
Make field names of GLPMCFG register in definitoins to be
the same with the databook.
Signed-off-by: Sevak Arakelyan <sevaka@synopsys.com>
---
drivers/usb/dwc2/hw.h | 38 ++++++++++++++++++++------------------
1 file changed, 20 insertions(+), 18 deletions(-)
diff --git a/drivers/usb/dwc2/hw.h b/drivers/usb/dwc2/hw.h
index 4592012c4743..279aaaba42f5 100644
--- a/drivers/usb/dwc2/hw.h
+++ b/drivers/usb/dwc2/hw.h
@@ -319,28 +319,30 @@
#define GHWCFG4_NUM_DEV_PERIO_IN_EP_SHIFT 0
#define GLPMCFG HSOTG_REG(0x0054)
-#define GLPMCFG_INV_SEL_HSIC BIT(31)
-#define GLPMCFG_HSIC_CONNECT BIT(30)
-#define GLPMCFG_RETRY_COUNT_STS_MASK (0x7 << 25)
-#define GLPMCFG_RETRY_COUNT_STS_SHIFT 25
-#define GLPMCFG_SEND_LPM BIT(24)
-#define GLPMCFG_RETRY_COUNT_MASK (0x7 << 21)
-#define GLPMCFG_RETRY_COUNT_SHIFT 21
-#define GLPMCFG_LPM_CHAN_INDEX_MASK (0xf << 17)
-#define GLPMCFG_LPM_CHAN_INDEX_SHIFT 17
-#define GLPMCFG_SLEEP_STATE_RESUMEOK BIT(16)
-#define GLPMCFG_PRT_SLEEP_STS BIT(15)
-#define GLPMCFG_LPM_RESP_MASK (0x3 << 13)
-#define GLPMCFG_LPM_RESP_SHIFT 13
+#define GLPMCFG_INVSELHSIC BIT(31)
+#define GLPMCFG_HSICCON BIT(30)
+#define GLPMCFG_RSTRSLPSTS BIT(29)
+#define GLPMCFG_ENBESL BIT(28)
+#define GLPMCFG_LPM_RETRYCNT_STS_MASK (0x7 << 25)
+#define GLPMCFG_LPM_RETRYCNT_STS_SHIFT 25
+#define GLPMCFG_SNDLPM BIT(24)
+#define GLPMCFG_RETRY_CNT_MASK (0x7 << 21)
+#define GLPMCFG_RETRY_CNT_SHIFT 21
+#define GLPMCFG_LPM_CHNL_INDX_MASK (0xf << 17)
+#define GLPMCFG_LPM_CHNL_INDX_SHIFT 17
+#define GLPMCFG_L1RESUMEOK BIT(16)
+#define GLPMCFG_SLPSTS BIT(15)
+#define GLPMCFG_COREL1RES_MASK (0x3 << 13)
+#define GLPMCFG_COREL1RES_SHIFT 13
#define GLPMCFG_HIRD_THRES_MASK (0x1f << 8)
#define GLPMCFG_HIRD_THRES_SHIFT 8
-#define GLPMCFG_HIRD_THRES_EN (0x10 << 8)
-#define GLPMCFG_EN_UTMI_SLEEP BIT(7)
-#define GLPMCFG_REM_WKUP_EN BIT(6)
+#define GLPMCFG_HIRD_THRES_EN (0x10 << 8)
+#define GLPMCFG_ENBLSLPM (1 << 7)
+#define GLPMCFG_BREMOTEWAKE (1 << 6)
#define GLPMCFG_HIRD_MASK (0xf << 2)
#define GLPMCFG_HIRD_SHIFT 2
-#define GLPMCFG_APPL_RESP BIT(1)
-#define GLPMCFG_LPM_CAP_EN BIT(0)
+#define GLPMCFG_APPL1RES BIT(1)
+#define GLPMCFG_LPMCAP BIT(0)
#define GPWRDN HSOTG_REG(0x0058)
#define GPWRDN_MULT_VAL_ID_BC_MASK (0x1f << 24)
--
2.11.0
next prev parent reply other threads:[~2017-04-28 8:48 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-04-28 8:46 [PATCH 0/9] usb: dwc2: gadget: Add LPM functionality Sevak Arakelyan
2017-04-28 8:47 ` Sevak Arakelyan [this message]
2017-04-28 8:48 ` [PATCH 2/9] usb: dwc2: Add core parameters for LPM support Sevak Arakelyan
2017-04-28 8:48 ` [PATCH 3/9] usb: dwc2: gadget: Add functionality to exit from LPM L1 state Sevak Arakelyan
2017-04-28 8:48 ` [PATCH 4/9] usb: dwc2: gadget: LPM interrupt handler Sevak Arakelyan
2017-04-28 8:55 ` [PATCH 5/9] usb: dwc2: Enable LPM Transaction Received interrupt Sevak Arakelyan
2017-04-28 8:55 ` [PATCH 6/9] usb: dwc2: gadget: Configure the core to enable LPM Sevak Arakelyan
2017-04-28 8:55 ` [PATCH 7/9] [HSLPM] usb: gadget: composite: Exclude SS Dev Cap Desc Sevak Arakelyan
2017-04-28 8:55 ` [PATCH 8/9] [HSLPM] usb: gadget: Allow a non-SuperSpeed gadget to support LPM Sevak Arakelyan
2017-04-28 8:56 ` [PATCH 9/9] [HSLPM] usb: dwc2: Enable LPM Sevak Arakelyan
2017-04-28 9:24 ` Greg Kroah-Hartman
2017-06-02 8:20 ` Felipe Balbi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=fe0babc6e72bfdf9254636efe907c05e2396634b.1493369198.git.sevaka@synopsys.com \
--to=sevak.arakelyan@synopsys.com \
--cc=John.Youn@synopsys.com \
--cc=balbi@kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®