From: Nicolas Dufresne <nicolas@ndufresne.ca>
To: Charvi Mehta <charvi.mehta@arm.com>,
linux-media@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Philipp Zabel <p.zabel@pengutronix.de>,
Vincenzo Frascino <vincenzo.frascino@arm.com>,
Rathinavel Sankaralingam <rath.sankaralingam@arm.com>,
Shobhit Pandey <shobhit.pandey@arm.com>
Subject: Re: [RFC PATCH 00/28] media: add arm Mali-V76 video decoder driver
Date: Thu, 19 Nov 2026 14:44:27 -0500 [thread overview]
Message-ID: <fe3f3912af33f1afed3459671fdf93a5a6764c27.camel@ndufresne.ca> (raw)
In-Reply-To: <20261119153758.1426673-1-charvi.mehta@arm.com>
[-- Attachment #1: Type: text/plain, Size: 17498 bytes --]
Hi,
its nice to see ARM working on upstream drivers.
Le jeudi 19 novembre 2026 à 15:37 +0000, Charvi Mehta a écrit :
> This series introduces support for the Arm Mali-V76 Video Processing Unit
> (VPU), providing H.264 video stream decoding through the V4L2 stateful
> memory-to-memory interface.
>
> The Mali-V76 offloads video decoding from the application processor. The
> host driver loads and manages the codec firmware, communicating with it
> through asynchronous message queues, interrupts and RPC requests. It also
> manages the firmware address space using the V76 internal MMU and controls
> hardware resources through the LSID and job-queue interfaces.
>
> The driver currently supports:
>
> - H.264 decoding through the V4L2 stateful memory-to-memory interface.
> - Multi-planar capture using V4L2_PIX_FMT_YUV420M, V4L2_PIX_FMT_NV12M
> and V4L2_PIX_FMT_NV21M, with MMAP and DMA-BUF buffer support.
> - Variant-specific definitions of supported formats, frame sizes,
> controls and hardware resources.
> - Explicit management of decoder and firmware states throughout
> stream setup, decoding and teardown.
> - Asynchronous firmware loading and caching, with interrupt-driven
> communication for commands, buffer completion and firmware events.
> - Separate control of OUTPUT and CAPTURE streaming, allowing CAPTURE
> buffers to be reconfigured during dynamic resolution changes.
> - Decoder drain, end-of-stream and dynamic resolution change handling,
> including source-change events and LAST buffer signalling.
> - Timestamp propagation and buffer metadata handling.
> - Firmware error and unsupported-stream reporting.
>
> The initial implementation supports a single active decoding session, with
> hardware resource management handled through the V76 LSID and job-queue
> interfaces. Support for additional codecs and concurrent sessions is
> outside the scope of this series.
>
> The series is based on media-committers/next.
>
> To simplify the testing a tree with the new patches on top has been made
> available at [1].
>
> [1] https://gitlab.arm.com/media/vpu/charvi/linux.git mali/v76/v1
>
> Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
> Cc: Rob Herring <robh@kernel.org>
> Cc: Krzysztof Kozlowski <krzk+dt@kernel.org>
> Cc: Conor Dooley <conor+dt@kernel.org>
> Cc: Philipp Zabel <p.zabel@pengutronix.de>
> Signed-off-by: Charvi Mehta <charvi.mehta@arm.com>
> Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
> Signed-off-by: Rathinavel Sankaralingam <rath.sankaralingam@arm.com>
> Signed-off-by: Shobhit Pandey <shobhit.pandey@arm.com>
>
> Testing
> =======
> The driver has been tested on Mali-V76 pre-silicon FPGA.
>
> Static tools like checkpatch, smatch, dt_binding_check, sparse, checkstack
> and Coccinelle run successfully with this driver.
>
> The driver has been tested with v4l2-ctl[2] and Gstreamer[3],
> v4l2-compliance [4] and Fluster [5].
>
> [2] v4l2-ctl -d /dev/video0 --verbose \
> --set-fmt-video-out=width=1920,height=1080,pixelformat=H264 \
> --set-fmt-video=width=1920,height=1080,pixelformat=NM12 \
> --stream-mmap=4 --stream-out-mmap=1 \
> --stream-from /media/CrowdRun_1080p.264 --stream-to decoded.yuv
>
> [3] gst-launch-1.0 -v filesrc location=/media/CrowdRun_720p.264 ! h264parse \
> ! v4l2h264dec ! filesink location=decoded.yuv sync=false
>
> [4] V4l2 compliance was tested using v4l2-compliance 1.28.1:
>
> v4l2-compliance -d /dev/video0 --stream-from /media/CrowdRun_1080p.264 -s 200
>
> v4l2-compliance 1.28.1, 64 bits, 64-bit time_t
>
> Compliance test for mali-vpu device /dev/video0:
>
> Driver Info:
> Driver name : mali-vpu
> Card type : mali-vpu-decoder
> Bus info : platform:6f030000.video-codec
> Driver version : 7.4.0
> Capabilities : 0x84204000
> Video Memory-to-Memory Multiplanar
> Streaming
> Extended Pix Format
> Device Capabilities
> Device Caps : 0x04204000
> Video Memory-to-Memory Multiplanar
> Streaming
> Extended Pix Format
> Detected Stateful Decoder
>
> Required ioctls:
> test VIDIOC_QUERYCAP: OK
> test invalid ioctls: OK
>
> Allow for multiple opens:
> test second /dev/video0 open: OK
> test VIDIOC_QUERYCAP: OK
> test VIDIOC_G/S_PRIORITY: OK
> test for unlimited opens: OK
>
> Debug ioctls:
> test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
> test VIDIOC_LOG_STATUS: OK (Not Supported)
>
> Input ioctls:
> test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
> test VIDIOC_ENUMAUDIO: OK (Not Supported)
> test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
> test VIDIOC_G/S_AUDIO: OK (Not Supported)
> Inputs: 0 Audio Inputs: 0 Tuners: 0
>
> Output ioctls:
> test VIDIOC_G/S_MODULATOR: OK (Not Supported)
> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> test VIDIOC_ENUMAUDOUT: OK (Not Supported)
> test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
> test VIDIOC_G/S_AUDOUT: OK (Not Supported)
> Outputs: 0 Audio Outputs: 0 Modulators: 0
>
> Input/Output configuration ioctls:
> test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
> test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
> test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
> test VIDIOC_G/S_EDID: OK (Not Supported)
>
> Control ioctls:
> test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
> test VIDIOC_QUERYCTRL: OK
> test VIDIOC_G/S_CTRL: OK
> test VIDIOC_G/S/TRY_EXT_CTRLS: OK
> test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
> test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
> Standard Controls: 2 Private Controls: 6
>
> Format ioctls:
> test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
> test VIDIOC_G/S_PARM: OK (Not Supported)
> test VIDIOC_G_FBUF: OK (Not Supported)
> test VIDIOC_G_FMT: OK
> test VIDIOC_TRY_FMT: OK
> test VIDIOC_S_FMT: OK
> test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
> test Cropping: OK (Not Supported)
> test Composing: OK (Not Supported)
> test Scaling: OK (Not Supported)
>
> Codec ioctls:
> test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
> test VIDIOC_G_ENC_INDEX: OK (Not Supported)
> test VIDIOC_(TRY_)DECODER_CMD: OK
>
> Buffer ioctls:
> test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
> test CREATE_BUFS maximum buffers: OK
> test VIDIOC_REMOVE_BUFS: OK
> test VIDIOC_EXPBUF: OK
> test Requests: OK (Not Supported)
>
> Test input 0:
>
> Streaming ioctls:
> test read/write: OK (Not Supported)
> test blocking wait: OK
> Video Capture Multiplanar: Captured 632 buffers
> test MMAP (select): OK
> Video Capture Multiplanar: Captured 632 buffers
> test MMAP (epoll): OK
> test USERPTR (select): OK (Not Supported)
> test DMABUF: Cannot test, specify --expbuf-device
>
> Total for mali-vpu device /dev/video0: 52, Succeeded: 52, Failed: 0, Warnings: 0
>
> [5] Fluster was run with
>
> GStreamer-H.264-V4L2 decoder:
>
> Running test suite JVT-AVC_V1 with decoder GStreamer-H.264-V4L2
> Ran 78/135 tests successfully.
>
> The failing tests:
>
> 52 test vectors fail as they are interlaced clips which mali-vpu does not
> support.
Is that a real hardware limitation, or you are just skipping it in firmware or
even in this driver? Its not like you have a compliant decoder without it. I've
recently asked Amlogic to not cut corner also, and they accepted to fix their
new driver.
>
> List of these test vectors:
> - cabac_mot_fld0_full
> - cabac_mot_mbaff0_full
> - cabac_mot_picaff0_full
> - CABREF3_Sand_D
> - CAFI1_SVA_C
> - CAMA1_Sony_C
> - CAMA1_TOSHIBA_B
> - cama1_vtc_c
> - cama2_vtc_b
> - CAMA3_Sand_E
> - cama3_vtc_b
> - CAMACI3_Sony_C
> - CAMANL1_TOSHIBA_B
> - CAMANL2_TOSHIBA_B
> - CAMANL3_Sand_E
> - CAMASL3_Sony_B
> - CAMP_MOT_MBAFF_L30
> - CAMP_MOT_MBAFF_L31
> - CANLMA2_Sony_C
> - CANLMA3_Sony_C
> - CAPA1_TOSHIBA_B
> - CAPAMA3_Sand_F
> - cavlc_mot_fld0_full_B
> - cavlc_mot_mbaff0_full_B
> - cavlc_mot_picaff0_full_B
> - CVCANLMA2_Sony_C
> - CVFI1_Sony_D
> - CVFI1_SVA_C
> - CVFI2_Sony_H
> - CVFI2_SVA_C
> - CVMA1_Sony_D
> - CVMA1_TOSHIBA_B
> - CVMANL1_TOSHIBA_B
> - CVMANL2_TOSHIBA_B
> - CVMAPAQP3_Sony_E
> - CVMAQP2_Sony_G
> - CVMAQP3_Sony_D
> - CVMP_MOT_FLD_L30_B
> - CVMP_MOT_FRM_L31_B
> - CVNLFI1_Sony_C
> - CVNLFI2_Sony_H
> - CVPA1_TOSHIBA_B
> - FI1_Sony_E
> - MR6_BT_B
> - MR7_BT_B
> - MR8_BT_B
> - MR9_BT_B
> - Sharp_MP_Field_1_B
> - Sharp_MP_Field_2_B
> - Sharp_MP_Field_3_B
> - Sharp_MP_PAFF_1r2
> - Sharp_MP_PAFF_2r
> 2 test vectors failed because FMO is unsupported.
> Test vectors: FM1_BT_B FM1_FT_E
> 2 test vectors failed because SP_SLICE type is unsupported.
> Test vectors: SP1_BT_A sp2_bt_b
> 1 additional test vector, CVFC1_Sony_C completes decoding but fails checksum
> verification due to a stride-handling issue in GStreamer 1.24.13. GStreamer
> replaces the driver-reported 150-byte planar chroma stride with 152 bytes,
> causing the decoded chroma planes to be read incorrectly.
1.24 is very old by now, but I think this specific file needs more work. One
part of the fix has been made recently:
https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/13059
>
> Running test suite JVT-FR-EXT with decoder GStreamer-H.264-V4L2
> Ran 25/69 tests successfully.
>
> The failing tests:
>
> 21 test vectors failed due to interlaced clips. Interlaced decoding is not
> supported in mali-vpu driver.
>
> Test Vectors:
> - brcm_freh10
> - brcm_freh11
> - brcm_freh4
> - brcm_freh5
> - brcm_freh6
> - freh7_b
> - FREXT01_JVC_D
> - FREXT02_JVC_C
> - FRExt2_Panasonic_C
> - FRExt4_Panasonic_B
> - HCAFF1_HHI_B
> - HCAMFF1_HHI_B
> - HCHP3_HHI_A
> - HPCAFL_BRCM_C
> - HPCAFLNL_BRCM_C
> - HPCAMAPALQ_BRCM_B
> - HPCVFL_BRCM_A HPCVFLNL_BRCM_A
> - HVLCFI0_Sony_B
> - HVLCMFF0_Sony_B
> - HVLCPFF0_Sony_B
>
> 2 test vectors fail due to 10bit bitstream. 10 bit decoding support to be
> enabled in subequent patches.
> Test vectors: FREH10-1 FREH10-2
Ack.
Nicolas
>
> 21 test vectors failed because 4:2:2 is not supported in this driver.
> Test vectors:
> - FREXT1_TANDBERG_A
> - FREXT2_TANDBERG_A
> - FREXT3_TANDBERG_A
> - Hi422FR10_SONY_A
> - Hi422FR11_SONY_A
> - Hi422FR12_SONY_A
> - Hi422FR1_SONY_A
> - Hi422FR2_SONY_A
> - Hi422FR3_SONY_A
> - Hi422FR4_SONY_A
> - Hi422FR13_SONY_A
> - Hi422FR14_SONY_A
> - Hi422FR15_SONY_A
> - Hi422FR6_SONY_A
> - Hi422FR7_SONY_A
> - Hi422FR8_SONY_A
> - Hi422FR9_SONY_A
> - Hi422FREXT16_SONY_A
> - Hi422FREXT17_SONY_A
> - Hi422FREXT18_SONY_A
> - Hi422FREXT19_SONY_A
>
> Charvi Mehta (21):
> dt-bindings: media: add Arm Mali-V76 VPU
> media: mali-vpu: add Mali VPU platform driver
> media: mali-vpu: register V4L2 decoder device and add querycap ioctl
> media: mali-vpu: initialize decoder format state
> media: mali-vpu: add V4L2 mem2mem and VB2 queue support
> media: mali-vpu: implement format query ioctls
> media: mali-vpu: implement TRY_FMT and S_FMT ioctls
> media: mali-vpu: register V76 decoder controls and introduce UAPI
> controls
> media: mali-vpu: add firmware cache infrastructure
> media: mali-vpu: load firmware for decoder sessions
> media: mali-vpu: prepare firmware address space
> media: mali-vpu: add firmware message transport
> media: mali-vpu: route decoder controls to firmware
> media: mali-vpu: handle firmware RPC requests
> media: mali-vpu: add LSID hardware support
> media: mali-vpu: add single session scheduler
> media: mali-vpu: handle firmware interrupts
> media: mali-vpu: start decoder firmware through LSID scheduling
> media: mali-vpu: propagate buffer metadata
> media: mali-vpu: handle firmware event responses
> media: MAINTAINERS: add Arm Mali-V76 VPU driver
>
> Rath Sankaralingam (4):
> media: mali-vpu: add MMU software page table manager
> media: mali-vpu: implement vb2 buffer queue handling
> media: mali-vpu: handle firmware buffer exchange
> media: mali-vpu: handle fatal firmware error
>
> Shobhit Pandey (3):
> media: mali-vpu: add decoder EOS and DRC handling
> media: mali-vpu: handle firmware buffer parameters
> media: mali-vpu: add stateful decoder state machine
>
> .../bindings/media/arm,mali-v76.yaml | 70 +
> MAINTAINERS | 11 +
> drivers/media/platform/arm/Kconfig | 1 +
> drivers/media/platform/arm/Makefile | 1 +
> drivers/media/platform/arm/mali-vpu/Kconfig | 17 +
> drivers/media/platform/arm/mali-vpu/Makefile | 18 +
> .../platform/arm/mali-vpu/mali-vpu-buffer.c | 426 +++++
> .../platform/arm/mali-vpu/mali-vpu-buffer.h | 109 ++
> .../platform/arm/mali-vpu/mali-vpu-controls.c | 351 ++++
> .../platform/arm/mali-vpu/mali-vpu-controls.h | 71 +
> .../platform/arm/mali-vpu/mali-vpu-dec.c | 226 +++
> .../platform/arm/mali-vpu/mali-vpu-dec.h | 27 +
> .../platform/arm/mali-vpu/mali-vpu-device.h | 72 +
> .../arm/mali-vpu/mali-vpu-firmware-cache.c | 549 ++++++
> .../arm/mali-vpu/mali-vpu-firmware-cache.h | 180 ++
> .../platform/arm/mali-vpu/mali-vpu-firmware.c | 1647 +++++++++++++++++
> .../platform/arm/mali-vpu/mali-vpu-firmware.h | 324 ++++
> .../platform/arm/mali-vpu/mali-vpu-formats.c | 95 +
> .../platform/arm/mali-vpu/mali-vpu-formats.h | 39 +
> .../platform/arm/mali-vpu/mali-vpu-lsid.c | 271 +++
> .../platform/arm/mali-vpu/mali-vpu-lsid.h | 58 +
> .../platform/arm/mali-vpu/mali-vpu-mmu.c | 699 +++++++
> .../platform/arm/mali-vpu/mali-vpu-mmu.h | 154 ++
> .../platform/arm/mali-vpu/mali-vpu-probe.c | 387 ++++
> .../arm/mali-vpu/mali-vpu-protocol-def-v3.h | 710 +++++++
> .../arm/mali-vpu/mali-vpu-registers.h | 81 +
> .../arm/mali-vpu/mali-vpu-scheduler.c | 248 +++
> .../arm/mali-vpu/mali-vpu-scheduler.h | 58 +
> .../platform/arm/mali-vpu/mali-vpu-session.c | 1260 +++++++++++++
> .../platform/arm/mali-vpu/mali-vpu-session.h | 174 ++
> .../platform/arm/mali-vpu/mali-vpu-state.h | 136 ++
> .../arm/mali-vpu/mali-vpu-variant-v76.c | 188 ++
> .../platform/arm/mali-vpu/mali-vpu-variant.h | 74 +
> .../platform/arm/mali-vpu/mali-vpu-vb2.c | 187 ++
> .../platform/arm/mali-vpu/mali-vpu-vb2.h | 13 +
> .../platform/arm/mali-vpu/mali-vpu-vidioc.c | 365 ++++
> .../platform/arm/mali-vpu/mali-vpu-vidioc.h | 17 +
> .../uapi/linux/media/arm/mali-vpu-config.h | 47 +
> include/uapi/linux/v4l2-controls.h | 6 +
> 39 files changed, 9367 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/media/arm,mali-v76.yaml
> create mode 100644 drivers/media/platform/arm/mali-vpu/Kconfig
> create mode 100644 drivers/media/platform/arm/mali-vpu/Makefile
> create mode 100644 drivers/media/platform/arm/mali-vpu/mali-vpu-buffer.c
> create mode 100644 drivers/media/platform/arm/mali-vpu/mali-vpu-buffer.h
> create mode 100644 drivers/media/platform/arm/mali-vpu/mali-vpu-controls.c
> create mode 100644 drivers/media/platform/arm/mali-vpu/mali-vpu-controls.h
> create mode 100644 drivers/media/platform/arm/mali-vpu/mali-vpu-dec.c
> create mode 100644 drivers/media/platform/arm/mali-vpu/mali-vpu-dec.h
> create mode 100644 drivers/media/platform/arm/mali-vpu/mali-vpu-device.h
> create mode 100644 drivers/media/platform/arm/mali-vpu/mali-vpu-firmware-cache.c
> create mode 100644 drivers/media/platform/arm/mali-vpu/mali-vpu-firmware-cache.h
> create mode 100644 drivers/media/platform/arm/mali-vpu/mali-vpu-firmware.c
> create mode 100644 drivers/media/platform/arm/mali-vpu/mali-vpu-firmware.h
> create mode 100644 drivers/media/platform/arm/mali-vpu/mali-vpu-formats.c
> create mode 100644 drivers/media/platform/arm/mali-vpu/mali-vpu-formats.h
> create mode 100644 drivers/media/platform/arm/mali-vpu/mali-vpu-lsid.c
> create mode 100644 drivers/media/platform/arm/mali-vpu/mali-vpu-lsid.h
> create mode 100644 drivers/media/platform/arm/mali-vpu/mali-vpu-mmu.c
> create mode 100644 drivers/media/platform/arm/mali-vpu/mali-vpu-mmu.h
> create mode 100644 drivers/media/platform/arm/mali-vpu/mali-vpu-probe.c
> create mode 100644 drivers/media/platform/arm/mali-vpu/mali-vpu-protocol-def-v3.h
> create mode 100644 drivers/media/platform/arm/mali-vpu/mali-vpu-registers.h
> create mode 100644 drivers/media/platform/arm/mali-vpu/mali-vpu-scheduler.c
> create mode 100644 drivers/media/platform/arm/mali-vpu/mali-vpu-scheduler.h
> create mode 100644 drivers/media/platform/arm/mali-vpu/mali-vpu-session.c
> create mode 100644 drivers/media/platform/arm/mali-vpu/mali-vpu-session.h
> create mode 100644 drivers/media/platform/arm/mali-vpu/mali-vpu-state.h
> create mode 100644 drivers/media/platform/arm/mali-vpu/mali-vpu-variant-v76.c
> create mode 100644 drivers/media/platform/arm/mali-vpu/mali-vpu-variant.h
> create mode 100644 drivers/media/platform/arm/mali-vpu/mali-vpu-vb2.c
> create mode 100644 drivers/media/platform/arm/mali-vpu/mali-vpu-vb2.h
> create mode 100644 drivers/media/platform/arm/mali-vpu/mali-vpu-vidioc.c
> create mode 100644 drivers/media/platform/arm/mali-vpu/mali-vpu-vidioc.h
> create mode 100644 include/uapi/linux/media/arm/mali-vpu-config.h
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
prev parent reply other threads:[~2026-11-19 19:44 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-19 15:37 Charvi Mehta
2026-11-19 15:37 ` [RFC PATCH 01/28] dt-bindings: media: add Arm Mali-V76 VPU Charvi Mehta
2026-11-19 15:37 ` [RFC PATCH 02/28] media: mali-vpu: add Mali VPU platform driver Charvi Mehta
2026-11-19 20:04 ` Nicolas Dufresne
2026-11-19 15:37 ` [RFC PATCH 03/28] media: mali-vpu: register V4L2 decoder device and add querycap ioctl Charvi Mehta
2026-11-19 20:10 ` Nicolas Dufresne
2026-11-19 15:37 ` [RFC PATCH 04/28] media: mali-vpu: initialize decoder format state Charvi Mehta
2026-11-19 20:30 ` Nicolas Dufresne
2026-11-19 15:37 ` [RFC PATCH 05/28] media: mali-vpu: add V4L2 mem2mem and VB2 queue support Charvi Mehta
2026-11-19 15:37 ` [RFC PATCH 06/28] media: mali-vpu: implement format query ioctls Charvi Mehta
2026-11-19 15:37 ` [RFC PATCH 07/28] media: mali-vpu: implement TRY_FMT and S_FMT ioctls Charvi Mehta
2026-11-19 20:44 ` Nicolas Dufresne
2026-11-19 15:37 ` [RFC PATCH 08/28] media: mali-vpu: register V76 decoder controls and introduce UAPI controls Charvi Mehta
2026-11-19 21:06 ` Nicolas Dufresne
2026-11-19 15:37 ` [RFC PATCH 09/28] media: mali-vpu: add MMU software page table manager Charvi Mehta
2026-11-19 15:37 ` [RFC PATCH 10/28] media: mali-vpu: add firmware cache infrastructure Charvi Mehta
2026-11-19 21:34 ` Nicolas Dufresne
2026-11-19 15:37 ` [RFC PATCH 11/28] media: mali-vpu: load firmware for decoder sessions Charvi Mehta
2026-11-19 15:37 ` [RFC PATCH 12/28] media: mali-vpu: prepare firmware address space Charvi Mehta
2026-11-19 15:37 ` [RFC PATCH 13/28] media: mali-vpu: add firmware message transport Charvi Mehta
2026-11-19 15:37 ` [RFC PATCH 14/28] media: mali-vpu: route decoder controls to firmware Charvi Mehta
2026-11-19 15:37 ` [RFC PATCH 15/28] media: mali-vpu: handle firmware RPC requests Charvi Mehta
2026-11-19 15:37 ` [RFC PATCH 16/28] media: mali-vpu: add LSID hardware support Charvi Mehta
2026-11-19 15:37 ` [RFC PATCH 17/28] media: mali-vpu: add single session scheduler Charvi Mehta
2026-11-19 15:37 ` [RFC PATCH 18/28] media: mali-vpu: handle firmware interrupts Charvi Mehta
2026-11-19 15:37 ` [RFC PATCH 19/28] media: mali-vpu: start decoder firmware through LSID scheduling Charvi Mehta
2026-11-19 15:37 ` [RFC PATCH 20/28] media: mali-vpu: implement vb2 buffer queue handling Charvi Mehta
2026-11-19 15:37 ` [RFC PATCH 21/28] media: mali-vpu: handle firmware buffer exchange Charvi Mehta
2026-11-19 15:37 ` [RFC PATCH 22/28] media: mali-vpu: handle fatal firmware error Charvi Mehta
2026-11-19 15:37 ` [RFC PATCH 23/28] media: mali-vpu: propagate buffer metadata Charvi Mehta
2026-11-19 15:37 ` [RFC PATCH 24/28] media: mali-vpu: add decoder EOS and DRC handling Charvi Mehta
2026-11-19 15:37 ` [RFC PATCH 25/28] media: mali-vpu: handle firmware buffer parameters Charvi Mehta
2026-11-19 15:37 ` [RFC PATCH 26/28] media: mali-vpu: handle firmware event responses Charvi Mehta
2026-11-19 15:37 ` [RFC PATCH 27/28] media: mali-vpu: add stateful decoder state machine Charvi Mehta
2026-11-19 15:37 ` [RFC PATCH 28/28] media: MAINTAINERS: add Arm Mali-V76 VPU driver Charvi Mehta
2026-11-19 19:44 ` Nicolas Dufresne [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=fe3f3912af33f1afed3459671fdf93a5a6764c27.camel@ndufresne.ca \
--to=nicolas@ndufresne.ca \
--cc=charvi.mehta@arm.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=p.zabel@pengutronix.de \
--cc=rath.sankaralingam@arm.com \
--cc=robh@kernel.org \
--cc=shobhit.pandey@arm.com \
--cc=vincenzo.frascino@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®