mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Joe Perches <joe@perches.com>
To: netdev@vger.kernel.org
Cc: Jesse Gross <jesse@nicira.com>,
	"David S. Miller" <davem@davemloft.net>,
	dev@openvswitch.org, linux-kernel@vger.kernel.org
Subject: [PATCH net-next] openvswitch: Use ether_addr_copy
Date: Tue, 18 Feb 2014 11:15:45 -0800	[thread overview]
Message-ID: <fee7d53a1cfdec0aec7ea35a1f2f4b5e66766ee3.1392750899.git.joe@perches.com> (raw)

It's slightly smaller/faster for some architectures.

Signed-off-by: Joe Perches <joe@perches.com>
---
 net/openvswitch/actions.c      |  4 ++--
 net/openvswitch/flow.c         | 16 ++++++++--------
 net/openvswitch/flow_netlink.c | 12 ++++++------
 3 files changed, 16 insertions(+), 16 deletions(-)

diff --git a/net/openvswitch/actions.c b/net/openvswitch/actions.c
index 2c77e7b..c36856a 100644
--- a/net/openvswitch/actions.c
+++ b/net/openvswitch/actions.c
@@ -134,8 +134,8 @@ static int set_eth_addr(struct sk_buff *skb,
 
 	skb_postpull_rcsum(skb, eth_hdr(skb), ETH_ALEN * 2);
 
-	memcpy(eth_hdr(skb)->h_source, eth_key->eth_src, ETH_ALEN);
-	memcpy(eth_hdr(skb)->h_dest, eth_key->eth_dst, ETH_ALEN);
+	ether_addr_copy(eth_hdr(skb)->h_source, eth_key->eth_src);
+	ether_addr_copy(eth_hdr(skb)->h_dest, eth_key->eth_dst);
 
 	ovs_skb_postpush_rcsum(skb, eth_hdr(skb), ETH_ALEN * 2);
 
diff --git a/net/openvswitch/flow.c b/net/openvswitch/flow.c
index 16f4b46..bd67bb4 100644
--- a/net/openvswitch/flow.c
+++ b/net/openvswitch/flow.c
@@ -385,14 +385,14 @@ static int parse_icmpv6(struct sk_buff *skb, struct sw_flow_key *key,
 			    && opt_len == 8) {
 				if (unlikely(!is_zero_ether_addr(key->ipv6.nd.sll)))
 					goto invalid;
-				memcpy(key->ipv6.nd.sll,
-				    &nd->opt[offset+sizeof(*nd_opt)], ETH_ALEN);
+				ether_addr_copy(key->ipv6.nd.sll,
+						&nd->opt[offset+sizeof(*nd_opt)]);
 			} else if (nd_opt->nd_opt_type == ND_OPT_TARGET_LL_ADDR
 				   && opt_len == 8) {
 				if (unlikely(!is_zero_ether_addr(key->ipv6.nd.tll)))
 					goto invalid;
-				memcpy(key->ipv6.nd.tll,
-				    &nd->opt[offset+sizeof(*nd_opt)], ETH_ALEN);
+				ether_addr_copy(key->ipv6.nd.tll,
+						&nd->opt[offset+sizeof(*nd_opt)]);
 			}
 
 			icmp_len -= opt_len;
@@ -452,8 +452,8 @@ int ovs_flow_extract(struct sk_buff *skb, u16 in_port, struct sw_flow_key *key)
 	 * header in the linear data area.
 	 */
 	eth = eth_hdr(skb);
-	memcpy(key->eth.src, eth->h_source, ETH_ALEN);
-	memcpy(key->eth.dst, eth->h_dest, ETH_ALEN);
+	ether_addr_copy(key->eth.src, eth->h_source);
+	ether_addr_copy(key->eth.dst, eth->h_dest);
 
 	__skb_pull(skb, 2 * ETH_ALEN);
 	/* We are going to push all headers that we pull, so no need to
@@ -551,8 +551,8 @@ int ovs_flow_extract(struct sk_buff *skb, u16 in_port, struct sw_flow_key *key)
 				key->ip.proto = ntohs(arp->ar_op);
 			memcpy(&key->ipv4.addr.src, arp->ar_sip, sizeof(key->ipv4.addr.src));
 			memcpy(&key->ipv4.addr.dst, arp->ar_tip, sizeof(key->ipv4.addr.dst));
-			memcpy(key->ipv4.arp.sha, arp->ar_sha, ETH_ALEN);
-			memcpy(key->ipv4.arp.tha, arp->ar_tha, ETH_ALEN);
+			ether_addr_copy(key->ipv4.arp.sha, arp->ar_sha);
+			ether_addr_copy(key->ipv4.arp.tha, arp->ar_tha);
 		}
 	} else if (key->eth.type == htons(ETH_P_IPV6)) {
 		int nh_len;             /* IPv6 Header + Extensions */
diff --git a/net/openvswitch/flow_netlink.c b/net/openvswitch/flow_netlink.c
index 4d000ac..c883b18 100644
--- a/net/openvswitch/flow_netlink.c
+++ b/net/openvswitch/flow_netlink.c
@@ -982,8 +982,8 @@ int ovs_nla_put_flow(const struct sw_flow_key *swkey,
 		goto nla_put_failure;
 
 	eth_key = nla_data(nla);
-	memcpy(eth_key->eth_src, output->eth.src, ETH_ALEN);
-	memcpy(eth_key->eth_dst, output->eth.dst, ETH_ALEN);
+	ether_addr_copy(eth_key->eth_src, output->eth.src);
+	ether_addr_copy(eth_key->eth_dst, output->eth.dst);
 
 	if (swkey->eth.tci || swkey->eth.type == htons(ETH_P_8021Q)) {
 		__be16 eth_type;
@@ -1055,8 +1055,8 @@ int ovs_nla_put_flow(const struct sw_flow_key *swkey,
 		arp_key->arp_sip = output->ipv4.addr.src;
 		arp_key->arp_tip = output->ipv4.addr.dst;
 		arp_key->arp_op = htons(output->ip.proto);
-		memcpy(arp_key->arp_sha, output->ipv4.arp.sha, ETH_ALEN);
-		memcpy(arp_key->arp_tha, output->ipv4.arp.tha, ETH_ALEN);
+		ether_addr_copy(arp_key->arp_sha, output->ipv4.arp.sha);
+		ether_addr_copy(arp_key->arp_tha, output->ipv4.arp.tha);
 	}
 
 	if ((swkey->eth.type == htons(ETH_P_IP) ||
@@ -1143,8 +1143,8 @@ int ovs_nla_put_flow(const struct sw_flow_key *swkey,
 				nd_key = nla_data(nla);
 				memcpy(nd_key->nd_target, &output->ipv6.nd.target,
 							sizeof(nd_key->nd_target));
-				memcpy(nd_key->nd_sll, output->ipv6.nd.sll, ETH_ALEN);
-				memcpy(nd_key->nd_tll, output->ipv6.nd.tll, ETH_ALEN);
+				ether_addr_copy(nd_key->nd_sll, output->ipv6.nd.sll);
+				ether_addr_copy(nd_key->nd_tll, output->ipv6.nd.tll);
 			}
 		}
 	}
-- 
1.8.1.2.459.gbcd45b4.dirty


             reply	other threads:[~2014-02-18 19:15 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-02-18 19:15 Joe Perches [this message]
2014-02-18 23:15 ` David Miller
2014-02-19 19:32   ` [ovs-dev] " Pravin Shelar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=fee7d53a1cfdec0aec7ea35a1f2f4b5e66766ee3.1392750899.git.joe@perches.com \
    --to=joe@perches.com \
    --cc=davem@davemloft.net \
    --cc=dev@openvswitch.org \
    --cc=jesse@nicira.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®