From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753042AbdLGLx4 (ORCPT ); Thu, 7 Dec 2017 06:53:56 -0500 Received: from mailgw01.mediatek.com ([210.61.82.183]:20982 "EHLO mailgw01.mediatek.com" rhost-flags-OK-FAIL-OK-FAIL) by vger.kernel.org with ESMTP id S1752780AbdLGLxy (ORCPT ); Thu, 7 Dec 2017 06:53:54 -0500 X-UUID: 8fb65948d0924de78c9974d23a1d097c-20171207 From: Chunfeng Yun To: Kishon Vijay Abraham I CC: Matthias Brugger , Ryder Lee , Chunfeng Yun , , , , Subject: [PATCH 1/3] phy: phy-mtk-tphy: use auto instead of force to bypass utmi signals Date: Thu, 7 Dec 2017 19:53:34 +0800 Message-ID: X-Mailer: git-send-email 1.7.9.5 MIME-Version: 1.0 Content-Type: text/plain X-MTK: N Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org When system is running, if usb2 phy is forced to bypass utmi signals, all PLL will be turned off, and it can't detect device connection anymore, so replace force mode with auto mode which can bypass utmi signals automatically if no device attached for normal flow. But keep the force mode to fix RX sensitivity degradation issue. Signed-off-by: Chunfeng Yun --- drivers/phy/mediatek/phy-mtk-tphy.c | 19 +++++++------------ 1 file changed, 7 insertions(+), 12 deletions(-) diff --git a/drivers/phy/mediatek/phy-mtk-tphy.c b/drivers/phy/mediatek/phy-mtk-tphy.c index fb8aba4..5d9d7f3 100644 --- a/drivers/phy/mediatek/phy-mtk-tphy.c +++ b/drivers/phy/mediatek/phy-mtk-tphy.c @@ -440,9 +440,9 @@ static void u2_phy_instance_init(struct mtk_tphy *tphy, u32 index = instance->index; u32 tmp; - /* switch to USB function. (system register, force ip into usb mode) */ + /* switch to USB function, and enable usb pll */ tmp = readl(com + U3P_U2PHYDTM0); - tmp &= ~P2C_FORCE_UART_EN; + tmp &= ~(P2C_FORCE_UART_EN | P2C_FORCE_SUSPENDM); tmp |= P2C_RG_XCVRSEL_VAL(1) | P2C_RG_DATAIN_VAL(0); writel(tmp, com + U3P_U2PHYDTM0); @@ -502,10 +502,8 @@ static void u2_phy_instance_power_on(struct mtk_tphy *tphy, u32 index = instance->index; u32 tmp; - /* (force_suspendm=0) (let suspendm=1, enable usb 480MHz pll) */ tmp = readl(com + U3P_U2PHYDTM0); - tmp &= ~(P2C_FORCE_SUSPENDM | P2C_RG_XCVRSEL); - tmp &= ~(P2C_RG_DATAIN | P2C_DTM0_PART_MASK); + tmp &= ~(P2C_RG_XCVRSEL | P2C_RG_DATAIN | P2C_DTM0_PART_MASK); writel(tmp, com + U3P_U2PHYDTM0); /* OTG Enable */ @@ -540,7 +538,6 @@ static void u2_phy_instance_power_off(struct mtk_tphy *tphy, tmp = readl(com + U3P_U2PHYDTM0); tmp &= ~(P2C_RG_XCVRSEL | P2C_RG_DATAIN); - tmp |= P2C_FORCE_SUSPENDM; writel(tmp, com + U3P_U2PHYDTM0); /* OTG Disable */ @@ -548,18 +545,16 @@ static void u2_phy_instance_power_off(struct mtk_tphy *tphy, tmp &= ~PA6_RG_U2_OTG_VBUSCMP_EN; writel(tmp, com + U3P_USBPHYACR6); - /* let suspendm=0, set utmi into analog power down */ - tmp = readl(com + U3P_U2PHYDTM0); - tmp &= ~P2C_RG_SUSPENDM; - writel(tmp, com + U3P_U2PHYDTM0); - udelay(1); - tmp = readl(com + U3P_U2PHYDTM1); tmp &= ~(P2C_RG_VBUSVALID | P2C_RG_AVALID); tmp |= P2C_RG_SESSEND; writel(tmp, com + U3P_U2PHYDTM1); if (tphy->pdata->avoid_rx_sen_degradation && index) { + tmp = readl(com + U3P_U2PHYDTM0); + tmp &= ~(P2C_RG_SUSPENDM | P2C_FORCE_SUSPENDM); + writel(tmp, com + U3P_U2PHYDTM0); + tmp = readl(com + U3D_U2PHYDCR0); tmp &= ~P2C_RG_SIF_U2PLL_FORCE_ON; writel(tmp, com + U3D_U2PHYDCR0); -- 1.9.1