From: Paul Menzel <pmenzel@molgen.mpg.de>
To: "Kryštof Korb" <krystof@korb.cz>, "Michal Piernik" <mprnk@o2.pl>
Cc: Marcel Holtmann <marcel@holtmann.org>,
Luiz Augusto von Dentz <luiz.dentz@gmail.com>,
linux-bluetooth@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] Bluetooth: btusb: Add Mercusys MA530 HWID 0x2c4e/0x0115 for Realtek 8761BUV
Date: Wed, 15 Apr 2026 17:40:25 +0200 [thread overview]
Message-ID: <ff4dac48-2417-49c1-ac02-e6dfac3bf928@molgen.mpg.de> (raw)
In-Reply-To: <C27221DE-E632-41C9-A15E-B393B6D314EB@korb.cz>
Dear Kryštof, dear Michal,
Am 15.04.26 um 16:47 schrieb Kryštof Korb:
> Tested-by: Kryštof Korb <krystof@korb.cz>
>
> Confirmed working on a device reporting as "MERCUSYS Bluetooth Adapter"
> (USB ID 2c4e:0115, bcdDevice 2.00), retail product Mercusys MA550H.
> Same RTL8761BU chipset, identical firmware load sequence.
>
> Seems the USB ID 2c4e:0115 covers at least two distinct retail
> products (MA530 and MA550H) from the same vendor.
>
> /sys/kernel/debug/usb/devices excerpt:
> P: Vendor=2c4e ProdID=0115 Rev= 2.00
> S: Manufacturer=
> S: Product=MERCUSYS Bluetooth Adapter
> S: SerialNumber=088AF177D360
>
> dmesg:
> Bluetooth: hci0: RTL: examining hci_ver=0a hci_rev=000b lmp_ver=0a lmp_subver=8761
> Bluetooth: hci0: RTL: rom_version status=0 version=1
> Bluetooth: hci0: RTL: loading rtl_bt/rtl8761bu_fw.bin
> Bluetooth: hci0: RTL: loading rtl_bt/rtl8761bu_config.bin
> Bluetooth: hci0: RTL: cfg_sz 6, total sz 30210
> Bluetooth: hci0: RTL: fw version 0xdfc6d922
>
>> 25. 2. 2025 v 16:58, Michal Piernik <mprnk@o2.pl>:
>>
>> /sys/kernel/debug/usb/devices:
>> T: Bus=03 Lev=01 Prnt=01 Port=05 Cnt=03 Dev#= 4 Spd=12 MxCh= 0
>> D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
>> P: Vendor=2c4e ProdID=0115 Rev= 2.00
>> S: Manufacturer=
>> S: Product=Mercusys MA530 Adapter
>> S: SerialNumber=30169D905719
>> C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
>> I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
>> E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
>> E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
>> E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
>> I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
>> E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
>> E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
>> I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
>> E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
>> E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
>> I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
>> E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
>> E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
>> I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
>> E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
>> E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
>> I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
>> E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
>> E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
>> I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
>> E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
>> E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
>>
>> dmesg:
>> [11106.761376] Bluetooth: hci0: RTL: examining hci_ver=0a hci_rev=000b lmp_ver=0a lmp_subver=8761
>> [11106.762370] Bluetooth: hci0: RTL: rom_version status=0 version=1
>> [11106.762374] Bluetooth: hci0: RTL: loading rtl_bt/rtl8761bu_fw.bin
>> [11106.762554] Bluetooth: hci0: RTL: loading rtl_bt/rtl8761bu_config.bin
>> [11106.762579] Bluetooth: hci0: RTL: cfg_sz 6, total sz 30210
>> [11106.910393] Bluetooth: hci0: RTL: fw version 0xdfc6d922
>> [11106.977569] Bluetooth: MGMT ver 1.22
>>
>> Signed-off-by: Michal Piernik <mprnk@o2.pl>
>> ---
>> drivers/bluetooth/btusb.c | 2 ++
>> 1 file changed, 2 insertions(+)
>>
>> diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
>> index f5609110f..0fc1dde8f 100644
>> --- a/drivers/bluetooth/btusb.c
>> +++ b/drivers/bluetooth/btusb.c
>> @@ -739,6 +739,8 @@ static const struct usb_device_id quirks_table[] = {
>> { USB_DEVICE(0x2ff8, 0xb011), .driver_info = BTUSB_REALTEK },
>>
>> /* Additional Realtek 8761BUV Bluetooth devices */
>> + { USB_DEVICE(0x2c4e, 0x0115), .driver_info = BTUSB_REALTEK |
>> + BTUSB_WIDEBAND_SPEECH },
>> { USB_DEVICE(0x2357, 0x0604), .driver_info = BTUSB_REALTEK |
>> BTUSB_WIDEBAND_SPEECH },
The list is unsorted anyway, but I’d add it at second position.
>> { USB_DEVICE(0x0b05, 0x190e), .driver_info = BTUSB_REALTEK |
>> --
>> 2.34.1
Could one of you please resend the patch with Kryštof’s information
added, so it gets picked up from Patchwork again.
Kind regards,
Paul
prev parent reply other threads:[~2026-04-15 15:40 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-02-25 15:58 Michal Piernik
2026-04-15 14:47 ` Kryštof Korb
2026-04-15 15:40 ` Paul Menzel [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ff4dac48-2417-49c1-ac02-e6dfac3bf928@molgen.mpg.de \
--to=pmenzel@molgen.mpg.de \
--cc=krystof@korb.cz \
--cc=linux-bluetooth@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=luiz.dentz@gmail.com \
--cc=marcel@holtmann.org \
--cc=mprnk@o2.pl \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®