From: Todd Brandt <todd.e.brandt@linux.intel.com>
To: sre@kernel.org, dbaryshkov@gmail.com
Cc: dwmw2@infradead.org, linux-pm@vger.kernel.org,
linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org,
todd.e.brandt@linux.intel.com, todd.e.brandt@intel.com,
jacob.jun.pan@linux.intel.com, sameo@linux.intel.com,
lee.jones@linaro.org, david.woodhouse@intel.com,
jic23@kernel.org
Subject: [PATCH v4 2/3] mfd/axp20x: add support for fuel gauge cell
Date: Wed, 4 Feb 2015 16:24:37 -0800 [thread overview]
Message-ID: <ffbbd295a05d6e224b995affec67ff5707bb64ce.1423082056.git.todd.e.brandt@linux.intel.com> (raw)
In-Reply-To: <cover.1423082056.git.todd.e.brandt@linux.intel.com>
In-Reply-To: <cover.1423082056.git.todd.e.brandt@linux.intel.com>
Register definitions and platform data structure
for fuel gauge cell devices.
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
---
include/linux/mfd/axp20x.h | 43 +++++++++++++++++++++++++++++++++++++++++--
1 file changed, 41 insertions(+), 2 deletions(-)
v4: same as v1-3 and is already accepted, re-included for continuity
diff --git a/include/linux/mfd/axp20x.h b/include/linux/mfd/axp20x.h
index 81589d1..dfabd6d 100644
--- a/include/linux/mfd/axp20x.h
+++ b/include/linux/mfd/axp20x.h
@@ -124,10 +124,27 @@ enum {
#define AXP288_PMIC_ADC_H 0x56
#define AXP288_PMIC_ADC_L 0x57
#define AXP288_ADC_TS_PIN_CTRL 0x84
-
#define AXP288_PMIC_ADC_EN 0x84
-#define AXP288_FG_TUNE5 0xed
+/* Fuel Gauge */
+#define AXP288_FG_RDC1_REG 0xba
+#define AXP288_FG_RDC0_REG 0xbb
+#define AXP288_FG_OCVH_REG 0xbc
+#define AXP288_FG_OCVL_REG 0xbd
+#define AXP288_FG_OCV_CURVE_REG 0xc0
+#define AXP288_FG_DES_CAP1_REG 0xe0
+#define AXP288_FG_DES_CAP0_REG 0xe1
+#define AXP288_FG_CC_MTR1_REG 0xe2
+#define AXP288_FG_CC_MTR0_REG 0xe3
+#define AXP288_FG_OCV_CAP_REG 0xe4
+#define AXP288_FG_CC_CAP_REG 0xe5
+#define AXP288_FG_LOW_CAP_REG 0xe6
+#define AXP288_FG_TUNE0 0xe8
+#define AXP288_FG_TUNE1 0xe9
+#define AXP288_FG_TUNE2 0xea
+#define AXP288_FG_TUNE3 0xeb
+#define AXP288_FG_TUNE4 0xec
+#define AXP288_FG_TUNE5 0xed
/* Regulators IDs */
enum {
@@ -236,4 +253,26 @@ struct axp20x_dev {
const struct regmap_irq_chip *regmap_irq_chip;
};
+#define BATTID_LEN 64
+#define OCV_CURVE_SIZE 32
+#define MAX_THERM_CURVE_SIZE 25
+#define PD_DEF_MIN_TEMP 0
+#define PD_DEF_MAX_TEMP 55
+
+struct axp20x_fg_pdata {
+ char battid[BATTID_LEN + 1];
+ int design_cap;
+ int min_volt;
+ int max_volt;
+ int max_temp;
+ int min_temp;
+ int cap1;
+ int cap0;
+ int rdc1;
+ int rdc0;
+ int ocv_curve[OCV_CURVE_SIZE];
+ int tcsz;
+ int thermistor_curve[MAX_THERM_CURVE_SIZE][2];
+};
+
#endif /* __LINUX_MFD_AXP20X_H */
--
2.1.0
next prev parent reply other threads:[~2015-02-05 0:26 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-02-05 0:24 [PATCH v4 0/3] X-Power AXP288 PMIC Fuel Gauge Driver Todd Brandt
2015-02-05 0:24 ` [PATCH v4 1/3] mfd/axp20x: change battery cell name to fuel gauge Todd Brandt
2015-02-05 0:24 ` Todd Brandt [this message]
2015-02-05 0:24 ` [PATCH v4 3/3] X-Power AXP288 PMIC Fuel Gauge Driver Todd Brandt
2015-03-05 0:30 ` [PATCH v4 0/3] " Sebastian Reichel
2015-03-05 7:57 ` Lee Jones
2015-03-07 19:26 ` Sebastian Reichel
2015-03-10 18:00 ` Todd E Brandt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ffbbd295a05d6e224b995affec67ff5707bb64ce.1423082056.git.todd.e.brandt@linux.intel.com \
--to=todd.e.brandt@linux.intel.com \
--cc=david.woodhouse@intel.com \
--cc=dbaryshkov@gmail.com \
--cc=dwmw2@infradead.org \
--cc=jacob.jun.pan@linux.intel.com \
--cc=jic23@kernel.org \
--cc=lee.jones@linaro.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=sameo@linux.intel.com \
--cc=sre@kernel.org \
--cc=todd.e.brandt@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®