From: Christian Hartmann <cornogle@googlemail.com>
To: linux-kernel@vger.kernel.org
Cc: dri-devel@lists.sf.net
Subject: Problem: radeon modeset=0 agpmode=-1 AGP still enabled in 2.6.32-rc8
Date: Mon, 23 Nov 2009 14:23:15 +0100 [thread overview]
Message-ID: <ffd8902a0911230523n18c052bfse21e61cc903bec73@mail.gmail.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 465 bytes --]
Hello,
I just wanted to disable agpmode and have set in the /etc/modules
radeon modeset=0 agpmode=-1
running update-initramfs and rebooting.
But I am wondering, cause AGP is still enabled. Is that really correct?
Attaching my dmesg after a (boot && s2disk && resume)
Ch. Hartmann
--
......oooO..............
.....(....).....Oooo...
......)../.....(....)....
.....(_/.......)../.....
...............(_/.......
... I WAS ..............
.......... HERE...... ;)
[-- Attachment #2: dmesg.after.txt --]
[-- Type: text/plain, Size: 123466 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-rc8 (chris@oddysseus) (gcc version 4.3.4 (Debian 4.3.4-6) ) #2 Mon Nov 23 02:15:00 CET 2009
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003ff60000 (usable)
[ 0.000000] BIOS-e820: 000000003ff60000 - 000000003ff6e000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003ff6e000 - 000000003ff80000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003ff80000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
[ 0.000000] DMI present.
[ 0.000000] last_pfn = 0x3ff60 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DBFFF uncachable
[ 0.000000] DC000-DFFFF write-back
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 base 03FF80000 mask FFFF80000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] Warning only 895MB will be used.
[ 0.000000] Use a HIGHMEM enabled kernel.
[ 0.000000] initial memory mapped : 0 - 00800000
[ 0.000000] init_memory_mapping: 0000000000000000-0000000037fa1000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037c00000 page 2M
[ 0.000000] 0037c00000 - 0037fa1000 page 4k
[ 0.000000] kernel direct mapping tables up to 37fa1000 @ 7000-c000
[ 0.000000] RAMDISK: 2f222000 - 2ffc745e
[ 0.000000] ACPI: RSDP 000f7010 00024 (v02 IBM )
[ 0.000000] ACPI: XSDT 3ff63397 0004C (v01 IBM TP-1I 00002032 LTP 00000000)
[ 0.000000] ACPI: FACP 3ff633e3 00081 (v01 IBM TP-1I 00002032 IBM 00000001)
[ 0.000000] ACPI: DSDT 3ff634ca 0AA8A (v01 IBM TP-1I 00002032 MSFT 0100000D)
[ 0.000000] ACPI: FACS 3ff7f000 00040
[ 0.000000] ACPI: SSDT 3ff63497 00033 (v01 IBM TP-1I 00002032 MSFT 0100000D)
[ 0.000000] ACPI: ECDT 3ff6df54 00052 (v01 IBM TP-1I 00002032 IBM 00000001)
[ 0.000000] ACPI: TCPA 3ff6dfa6 00032 (v01 IBM TP-1I 00002032 PTL 00000001)
[ 0.000000] ACPI: BOOT 3ff6dfd8 00028 (v01 IBM TP-1I 00002032 LTP 00000001)
[ 0.000000] 895MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 37fa1000
[ 0.000000] low ram: 0 - 37fa1000
[ 0.000000] node 0 low ram: 00000000 - 37fa1000
[ 0.000000] node 0 bootmap 00008000 - 0000eff8
[ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 0037fa1000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000100000 - 0000631bc0] TEXT DATA BSS ==> [0000100000 - 0000631bc0]
[ 0.000000] #2 [002f222000 - 002ffc745e] RAMDISK ==> [002f222000 - 002ffc745e]
[ 0.000000] #3 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
[ 0.000000] #4 [0000632000 - 000063410f] BRK ==> [0000632000 - 000063410f]
[ 0.000000] #5 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
[ 0.000000] #6 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x00037fa1
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x00037fa1
[ 0.000000] On node 0 totalpages: 229184
[ 0.000000] free_area_init_node: node 0, pgdat c0542a38, node_mem_map c1000000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3967 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223425 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] Local APIC disabled by BIOS -- reenabling.
[ 0.000000] Found and enabled local APIC!
[ 0.000000] nr_irqs_gsi: 16
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
[ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
[ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:bf800000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 227392
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-rc8 root=UUID=cc527f28-a768-4379-accb-56069aee2d0a ro CONSOLE=/dev/tty1 gfxpayload=1024x768x24 quiet nosplash drm.debug=0x0 lapic resume=/dev/hda5
[ 0.000000] Unknown boot option `drm.debug=0x0': ignoring
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] Memory: 889232k/917124k available (2985k kernel code, 27292k reserved, 1408k data, 444k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfffa3000 - 0xfffff000 ( 368 kB)
[ 0.000000] vmalloc : 0xf87a1000 - 0xfffa1000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf7fa1000 ( 895 MB)
[ 0.000000] .init : 0xc054b000 - 0xc05ba000 ( 444 kB)
[ 0.000000] .data : 0xc03ea4b9 - 0xc054a7fc (1408 kB)
[ 0.000000] .text : 0xc0100000 - 0xc03ea4b9 (2985 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:288
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1798.450 MHz processor.
[ 0.001006] Calibrating delay loop (skipped), value calculated using timer frequency.. 3596.90 BogoMIPS (lpj=1798450)
[ 0.001063] Security Framework initialized
[ 0.001071] SELinux: Disabled at boot.
[ 0.001092] Mount-cache hash table entries: 512
[ 0.001257] Initializing cgroup subsys ns
[ 0.001264] Initializing cgroup subsys cpuacct
[ 0.001269] Initializing cgroup subsys devices
[ 0.001273] Initializing cgroup subsys freezer
[ 0.001277] Initializing cgroup subsys net_cls
[ 0.001315] CPU: Trace cache: 12K uops, L1 D cache: 8K
[ 0.001321] CPU: L2 cache: 512K
[ 0.001327] mce: CPU supports 4 MCE banks
[ 0.001344] CPU0: Thermal monitoring enabled (TM1)
[ 0.001365] Performance Events: no PMU driver, software events only.
[ 0.001371] CPU: Mobile Intel(R) Pentium(R) 4 - M CPU 1.80GHz stepping 07
[ 0.001386] Checking 'hlt' instruction... OK.
[ 0.008248] ACPI: Core revision 20090903
[ 0.035463] ACPI: setting ELCR to 0200 (from 0800)
[ 0.036008] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.037004] ftrace: allocating 18244 entries in 36 pages
[ 0.038994] device: 'platform': device_add
[ 0.038994] PM: Adding info for No Bus:platform
[ 0.038994] bus: 'platform': registered
[ 0.038994] Registering sysdev class 'cpu'
[ 0.038994] Registering sysdev class 'lapic'
[ 0.038994] Registering sys device of class 'lapic'
[ 0.038994] Registering sys device 'lapic0'
[ 0.038994] regulator: core version 0.5
[ 0.038994] device class 'regulator': registering
[ 0.039048] bus: 'virtio': registered
[ 0.039135] NET: Registered protocol family 16
[ 0.039157] device class 'bdi': registering
[ 0.039228] device class 'pci_bus': registering
[ 0.039335] bus: 'pci': registered
[ 0.039339] device class 'backlight': registering
[ 0.039383] device class 'tty': registering
[ 0.039429] device class 'vtconsole': registering
[ 0.039476] device: 'vtcon0': device_add
[ 0.039494] PM: Adding info for No Bus:vtcon0
[ 0.039594] bus: 'i2c': registered
[ 0.039603] bus: 'i2c': add driver dummy
[ 0.039667] ACPI: bus type pci registered
[ 0.039673] device class 'dmi': registering
[ 0.039721] device: 'id': device_add
[ 0.039749] PM: Adding info for No Bus:id
[ 0.039807] device class 'dma': registering
[ 0.040028] PCI: PCI BIOS revision 2.10 entry at 0xfd8fe, last bus=8
[ 0.040033] PCI: Using configuration type 1 for base access
[ 0.040050] Registering sys device of class 'cpu'
[ 0.040059] Registering sys device 'cpu0'
[ 0.045804] device: 'default': device_add
[ 0.045823] PM: Adding info for No Bus:default
[ 0.045989] bio: create slab <bio-0> at 0
[ 0.046064] device class 'block': registering
[ 0.046295] device class 'graphics': registering
[ 0.047698] ACPI: EC: EC description table is found, configuring boot EC
[ 0.061065] ACPI: Interpreter enabled
[ 0.061076] ACPI: (supports S0 S3 S4 S5)
[ 0.061114] ACPI: Using PIC for interrupt routing
[ 0.061242] bus: 'acpi': registered
[ 0.061268] device: 'LNXSYSTM:00': device_add
[ 0.061278] bus: 'acpi': add device LNXSYSTM:00
[ 0.061288] PM: Adding info for acpi:LNXSYSTM:00
[ 0.061367] device: 'LNXCPU:00': device_add
[ 0.061374] bus: 'acpi': add device LNXCPU:00
[ 0.061381] PM: Adding info for acpi:LNXCPU:00
[ 0.061452] device: 'LNXSYBUS:00': device_add
[ 0.061459] bus: 'acpi': add device LNXSYBUS:00
[ 0.061466] PM: Adding info for acpi:LNXSYBUS:00
[ 0.061905] device: 'PNP0C0F:00': device_add
[ 0.061913] bus: 'acpi': add device PNP0C0F:00
[ 0.061920] PM: Adding info for acpi:PNP0C0F:00
[ 0.062347] device: 'PNP0C0F:01': device_add
[ 0.062355] bus: 'acpi': add device PNP0C0F:01
[ 0.062362] PM: Adding info for acpi:PNP0C0F:01
[ 0.062781] device: 'PNP0C0F:02': device_add
[ 0.062789] bus: 'acpi': add device PNP0C0F:02
[ 0.062797] PM: Adding info for acpi:PNP0C0F:02
[ 0.063255] device: 'PNP0C0F:03': device_add
[ 0.063263] bus: 'acpi': add device PNP0C0F:03
[ 0.063271] PM: Adding info for acpi:PNP0C0F:03
[ 0.063679] device: 'PNP0C0F:04': device_add
[ 0.063687] bus: 'acpi': add device PNP0C0F:04
[ 0.063694] PM: Adding info for acpi:PNP0C0F:04
[ 0.064080] device: 'PNP0C0F:05': device_add
[ 0.064088] bus: 'acpi': add device PNP0C0F:05
[ 0.064096] PM: Adding info for acpi:PNP0C0F:05
[ 0.064452] device: 'PNP0C0F:06': device_add
[ 0.064460] bus: 'acpi': add device PNP0C0F:06
[ 0.064468] PM: Adding info for acpi:PNP0C0F:06
[ 0.064817] device: 'PNP0C0F:07': device_add
[ 0.064825] bus: 'acpi': add device PNP0C0F:07
[ 0.064833] PM: Adding info for acpi:PNP0C0F:07
[ 0.064934] device: 'PNP0C01:00': device_add
[ 0.064942] bus: 'acpi': add device PNP0C01:00
[ 0.064949] PM: Adding info for acpi:PNP0C01:00
[ 0.065208] device: 'PNP0C0D:00': device_add
[ 0.065208] bus: 'acpi': add device PNP0C0D:00
[ 0.065208] PM: Adding info for acpi:PNP0C0D:00
[ 0.066081] device: 'PNP0C0E:00': device_add
[ 0.066090] bus: 'acpi': add device PNP0C0E:00
[ 0.066098] PM: Adding info for acpi:PNP0C0E:00
[ 0.066222] device: 'PNP0A03:00': device_add
[ 0.066229] bus: 'acpi': add device PNP0A03:00
[ 0.066237] PM: Adding info for acpi:PNP0A03:00
[ 0.066345] device: 'device:00': device_add
[ 0.066351] bus: 'acpi': add device device:00
[ 0.066362] PM: Adding info for acpi:device:00
[ 0.066460] device: 'PNP0C02:00': device_add
[ 0.066467] bus: 'acpi': add device PNP0C02:00
[ 0.066475] PM: Adding info for acpi:PNP0C02:00
[ 0.066581] device: 'PNP0000:00': device_add
[ 0.066587] bus: 'acpi': add device PNP0000:00
[ 0.066595] PM: Adding info for acpi:PNP0000:00
[ 0.066688] device: 'PNP0100:00': device_add
[ 0.066694] bus: 'acpi': add device PNP0100:00
[ 0.066702] PM: Adding info for acpi:PNP0100:00
[ 0.066796] device: 'PNP0200:00': device_add
[ 0.066802] bus: 'acpi': add device PNP0200:00
[ 0.066810] PM: Adding info for acpi:PNP0200:00
[ 0.066911] device: 'PNP0800:00': device_add
[ 0.066920] bus: 'acpi': add device PNP0800:00
[ 0.066928] PM: Adding info for acpi:PNP0800:00
[ 0.067044] device: 'PNP0C04:00': device_add
[ 0.067051] bus: 'acpi': add device PNP0C04:00
[ 0.067059] PM: Adding info for acpi:PNP0C04:00
[ 0.067155] device: 'PNP0B00:00': device_add
[ 0.067162] bus: 'acpi': add device PNP0B00:00
[ 0.067170] PM: Adding info for acpi:PNP0B00:00
[ 0.067263] device: 'PNP0303:00': device_add
[ 0.067269] bus: 'acpi': add device PNP0303:00
[ 0.067278] PM: Adding info for acpi:PNP0303:00
[ 0.067377] device: 'IBM0057:00': device_add
[ 0.067384] bus: 'acpi': add device IBM0057:00
[ 0.067393] PM: Adding info for acpi:IBM0057:00
[ 0.068101] device: 'PNP0501:00': device_add
[ 0.068110] bus: 'acpi': add device PNP0501:00
[ 0.068119] PM: Adding info for acpi:PNP0501:00
[ 0.068390] device: 'PNP0400:00': device_add
[ 0.068398] bus: 'acpi': add device PNP0400:00
[ 0.068407] PM: Adding info for acpi:PNP0400:00
[ 0.068694] device: 'IBM0071:00': device_add
[ 0.068701] bus: 'acpi': add device IBM0071:00
[ 0.068710] PM: Adding info for acpi:IBM0071:00
[ 0.068842] device: 'PNP0C09:00': device_add
[ 0.068849] bus: 'acpi': add device PNP0C09:00
[ 0.068858] PM: Adding info for acpi:PNP0C09:00
[ 0.068973] device: 'LNXPOWER:00': device_add
[ 0.068980] bus: 'acpi': add device LNXPOWER:00
[ 0.069012] PM: Adding info for acpi:LNXPOWER:00
[ 0.069127] device: 'PNP0C0A:00': device_add
[ 0.069127] bus: 'acpi': add device PNP0C0A:00
[ 0.069127] PM: Adding info for acpi:PNP0C0A:00
[ 0.069210] device: 'ACPI0003:00': device_add
[ 0.069217] bus: 'acpi': add device ACPI0003:00
[ 0.069226] PM: Adding info for acpi:ACPI0003:00
[ 0.070139] device: 'IBM0068:00': device_add
[ 0.070146] bus: 'acpi': add device IBM0068:00
[ 0.070155] PM: Adding info for acpi:IBM0068:00
[ 0.070306] device: 'device:01': device_add
[ 0.070313] bus: 'acpi': add device device:01
[ 0.070321] PM: Adding info for acpi:device:01
[ 0.070441] device: 'LNXVIDEO:00': device_add
[ 0.070447] bus: 'acpi': add device LNXVIDEO:00
[ 0.070455] PM: Adding info for acpi:LNXVIDEO:00
[ 0.070550] device: 'device:02': device_add
[ 0.070557] bus: 'acpi': add device device:02
[ 0.070565] PM: Adding info for acpi:device:02
[ 0.070655] device: 'device:03': device_add
[ 0.070661] bus: 'acpi': add device device:03
[ 0.070670] PM: Adding info for acpi:device:03
[ 0.070762] device: 'device:04': device_add
[ 0.070769] bus: 'acpi': add device device:04
[ 0.070778] PM: Adding info for acpi:device:04
[ 0.070868] device: 'device:05': device_add
[ 0.070875] bus: 'acpi': add device device:05
[ 0.070883] PM: Adding info for acpi:device:05
[ 0.071021] device: 'device:06': device_add
[ 0.071028] bus: 'acpi': add device device:06
[ 0.071036] PM: Adding info for acpi:device:06
[ 0.071132] device: 'device:07': device_add
[ 0.071139] bus: 'acpi': add device device:07
[ 0.071148] PM: Adding info for acpi:device:07
[ 0.071249] device: 'device:08': device_add
[ 0.071256] bus: 'acpi': add device device:08
[ 0.071265] PM: Adding info for acpi:device:08
[ 0.071692] device: 'device:09': device_add
[ 0.071700] bus: 'acpi': add device device:09
[ 0.071710] PM: Adding info for acpi:device:09
[ 0.071831] device: 'device:0a': device_add
[ 0.071838] bus: 'acpi': add device device:0a
[ 0.071849] PM: Adding info for acpi:device:0a
[ 0.071943] device: 'device:0b': device_add
[ 0.071950] bus: 'acpi': add device device:0b
[ 0.071959] PM: Adding info for acpi:device:0b
[ 0.072096] device: 'device:0c': device_add
[ 0.072103] bus: 'acpi': add device device:0c
[ 0.072113] PM: Adding info for acpi:device:0c
[ 0.073117] device: 'device:0d': device_add
[ 0.073127] bus: 'acpi': add device device:0d
[ 0.073138] PM: Adding info for acpi:device:0d
[ 0.073246] device: 'device:0e': device_add
[ 0.073252] bus: 'acpi': add device device:0e
[ 0.073262] PM: Adding info for acpi:device:0e
[ 0.073709] device: 'device:0f': device_add
[ 0.073718] bus: 'acpi': add device device:0f
[ 0.073727] PM: Adding info for acpi:device:0f
[ 0.073924] device: 'device:10': device_add
[ 0.073931] bus: 'acpi': add device device:10
[ 0.073941] PM: Adding info for acpi:device:10
[ 0.074124] device: 'device:11': device_add
[ 0.074133] bus: 'acpi': add device device:11
[ 0.074143] PM: Adding info for acpi:device:11
[ 0.074403] device: 'LNXTHERM:00': device_add
[ 0.074411] bus: 'acpi': add device LNXTHERM:00
[ 0.074420] PM: Adding info for acpi:LNXTHERM:00
[ 0.074490] device: 'LNXTHERM:01': device_add
[ 0.074497] bus: 'acpi': add device LNXTHERM:01
[ 0.074508] PM: Adding info for acpi:LNXTHERM:01
[ 0.074613] device: 'LNXPWRBN:00': device_add
[ 0.074620] bus: 'acpi': add device LNXPWRBN:00
[ 0.074629] PM: Adding info for acpi:LNXPWRBN:00
[ 0.074683] bus: 'acpi': add driver ec
[ 0.074703] bus: 'acpi': driver_probe_device: matched device PNP0C09:00 with driver ec
[ 0.074708] bus: 'acpi': really_probe: probing driver ec with device PNP0C09:00
[ 0.074802] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 0.074808] driver: 'PNP0C09:00': driver_bound: bound to device 'ec'
[ 0.074813] bus: 'acpi': really_probe: bound device PNP0C09:00 to driver ec
[ 0.074874] bus: 'acpi': add driver power
[ 0.074886] bus: 'acpi': driver_probe_device: matched device LNXPOWER:00 with driver power
[ 0.074891] bus: 'acpi': really_probe: probing driver power with device LNXPOWER:00
[ 0.075107] ACPI: Power Resource [PUBS] (on)
[ 0.075112] driver: 'LNXPOWER:00': driver_bound: bound to device 'power'
[ 0.075116] bus: 'acpi': really_probe: bound device LNXPOWER:00 to driver power
[ 0.075345] Registering platform device 'dock.0'. Parent at platform
[ 0.075350] device: 'dock.0': device_add
[ 0.075357] bus: 'platform': add device dock.0
[ 0.075366] PM: Adding info for platform:dock.0
[ 0.076217] Registering platform device 'dock.1'. Parent at platform
[ 0.076217] device: 'dock.1': device_add
[ 0.076217] bus: 'platform': add device dock.1
[ 0.076217] PM: Adding info for platform:dock.1
[ 0.077577] Registering platform device 'dock.2'. Parent at platform
[ 0.077582] device: 'dock.2': device_add
[ 0.077590] bus: 'platform': add device dock.2
[ 0.077599] PM: Adding info for platform:dock.2
[ 0.078140] ACPI: ACPI Dock Station Driver: 3 docks/bays found
[ 0.078147] bus: 'acpi': add driver pci_root
[ 0.078161] bus: 'acpi': driver_probe_device: matched device PNP0A03:00 with driver pci_root
[ 0.078166] bus: 'acpi': really_probe: probing driver pci_root with device PNP0A03:00
[ 0.078206] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.078215] device: 'pci0000:00': device_add
[ 0.078231] PM: Adding info for No Bus:pci0000:00
[ 0.078238] device: '0000:00': device_add
[ 0.078255] PM: Adding info for No Bus:0000:00
[ 0.078339] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xe0000000-0xe3ffffff]
[ 0.078506] pci 0000:00:1d.0: reg 20 io port: [0x1800-0x181f]
[ 0.078581] pci 0000:00:1d.1: reg 20 io port: [0x1820-0x183f]
[ 0.078653] pci 0000:00:1d.2: reg 20 io port: [0x1840-0x185f]
[ 0.078794] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
[ 0.078801] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH4 GPIO
[ 0.078838] pci 0000:00:1f.1: reg 10 io port: [0x1f0-0x1f7]
[ 0.078849] pci 0000:00:1f.1: reg 14 io port: [0x3f4-0x3f7]
[ 0.078860] pci 0000:00:1f.1: reg 18 io port: [0x170-0x177]
[ 0.078870] pci 0000:00:1f.1: reg 1c io port: [0x374-0x377]
[ 0.078881] pci 0000:00:1f.1: reg 20 io port: [0x1860-0x186f]
[ 0.078892] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff]
[ 0.078961] pci 0000:00:1f.3: reg 20 io port: [0x1880-0x189f]
[ 0.079032] pci 0000:00:1f.5: reg 10 io port: [0x1c00-0x1cff]
[ 0.079043] pci 0000:00:1f.5: reg 14 io port: [0x18c0-0x18ff]
[ 0.079110] pci 0000:00:1f.6: reg 10 io port: [0x2400-0x24ff]
[ 0.079121] pci 0000:00:1f.6: reg 14 io port: [0x2000-0x207f]
[ 0.079210] pci 0000:01:00.0: reg 10 32bit mmio pref: [0xe8000000-0xefffffff]
[ 0.079219] pci 0000:01:00.0: reg 14 io port: [0x3000-0x30ff]
[ 0.079229] pci 0000:01:00.0: reg 18 32bit mmio: [0xd0100000-0xd010ffff]
[ 0.079251] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
[ 0.079278] pci 0000:01:00.0: supports D1 D2
[ 0.079328] pci 0000:00:01.0: bridge io port: [0x3000-0x3fff]
[ 0.079334] pci 0000:00:01.0: bridge 32bit mmio: [0xd0100000-0xd01fffff]
[ 0.079341] pci 0000:00:01.0: bridge 32bit mmio pref: [0xe8000000-0xefffffff]
[ 0.079391] pci 0000:02:00.0: reg 10 32bit mmio: [0x50000000-0x50000fff]
[ 0.079417] pci 0000:02:00.0: supports D1 D2
[ 0.079421] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.079429] pci 0000:02:00.0: PME# disabled
[ 0.079475] pci 0000:02:00.1: reg 10 32bit mmio: [0x51000000-0x51000fff]
[ 0.079501] pci 0000:02:00.1: supports D1 D2
[ 0.079505] pci 0000:02:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.079512] pci 0000:02:00.1: PME# disabled
[ 0.079574] pci 0000:02:08.0: reg 10 32bit mmio: [0xd0200000-0xd0200fff]
[ 0.079585] pci 0000:02:08.0: reg 14 io port: [0x8000-0x803f]
[ 0.079636] pci 0000:02:08.0: supports D1 D2
[ 0.079640] pci 0000:02:08.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.079647] pci 0000:02:08.0: PME# disabled
[ 0.079690] pci 0000:00:1e.0: transparent bridge
[ 0.079697] pci 0000:00:1e.0: bridge io port: [0x4000-0x8fff]
[ 0.079705] pci 0000:00:1e.0: bridge 32bit mmio: [0xd0200000-0xdfffffff]
[ 0.079713] pci 0000:00:1e.0: bridge 32bit mmio pref: [0xf0000000-0xf7ffffff]
[ 0.079768] pci_bus 0000:00: on NUMA node 0
[ 0.079778] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.079854] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 0.079898] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 0.080053] device: '0000:00:00.0': device_add
[ 0.080218] bus: 'pci': add device 0000:00:00.0
[ 0.080240] PM: Adding info for pci:0000:00:00.0
[ 0.080308] device: '0000:00:01.0': device_add
[ 0.080476] bus: 'pci': add device 0000:00:01.0
[ 0.080496] PM: Adding info for pci:0000:00:01.0
[ 0.080548] device: '0000:00:1d.0': device_add
[ 0.080714] bus: 'pci': add device 0000:00:1d.0
[ 0.080740] PM: Adding info for pci:0000:00:1d.0
[ 0.080791] device: '0000:00:1d.1': device_add
[ 0.080959] bus: 'pci': add device 0000:00:1d.1
[ 0.080998] PM: Adding info for pci:0000:00:1d.1
[ 0.081052] device: '0000:00:1d.2': device_add
[ 0.081221] bus: 'pci': add device 0000:00:1d.2
[ 0.081242] PM: Adding info for pci:0000:00:1d.2
[ 0.081294] device: '0000:00:1e.0': device_add
[ 0.081463] bus: 'pci': add device 0000:00:1e.0
[ 0.081487] PM: Adding info for pci:0000:00:1e.0
[ 0.081538] device: '0000:00:1f.0': device_add
[ 0.081707] bus: 'pci': add device 0000:00:1f.0
[ 0.081732] PM: Adding info for pci:0000:00:1f.0
[ 0.081784] device: '0000:00:1f.1': device_add
[ 0.081953] bus: 'pci': add device 0000:00:1f.1
[ 0.081977] PM: Adding info for pci:0000:00:1f.1
[ 0.082049] device: '0000:00:1f.3': device_add
[ 0.082214] bus: 'pci': add device 0000:00:1f.3
[ 0.082239] PM: Adding info for pci:0000:00:1f.3
[ 0.082288] device: '0000:00:1f.5': device_add
[ 0.082451] bus: 'pci': add device 0000:00:1f.5
[ 0.082476] PM: Adding info for pci:0000:00:1f.5
[ 0.082525] device: '0000:00:1f.6': device_add
[ 0.082692] bus: 'pci': add device 0000:00:1f.6
[ 0.082718] PM: Adding info for pci:0000:00:1f.6
[ 0.082768] device: '0000:01:00.0': device_add
[ 0.082807] bus: 'pci': add device 0000:01:00.0
[ 0.082834] PM: Adding info for pci:0000:01:00.0
[ 0.082886] device: '0000:01': device_add
[ 0.082902] PM: Adding info for No Bus:0000:01
[ 0.082950] device: '0000:02:00.0': device_add
[ 0.083525] bus: 'pci': add device 0000:02:00.0
[ 0.083548] PM: Adding info for pci:0000:02:00.0
[ 0.083609] device: '0000:02:00.1': device_add
[ 0.084173] bus: 'pci': add device 0000:02:00.1
[ 0.084197] PM: Adding info for pci:0000:02:00.1
[ 0.084256] device: '0000:02:08.0': device_add
[ 0.084769] bus: 'pci': add device 0000:02:08.0
[ 0.084794] PM: Adding info for pci:0000:02:08.0
[ 0.084853] device: '0000:03': device_add
[ 0.084869] PM: Adding info for No Bus:0000:03
[ 0.084917] device: '0000:07': device_add
[ 0.084931] PM: Adding info for No Bus:0000:07
[ 0.084978] device: '0000:02': device_add
[ 0.085008] PM: Adding info for No Bus:0000:02
[ 0.085057] driver: 'PNP0A03:00': driver_bound: bound to device 'pci_root'
[ 0.085063] bus: 'acpi': really_probe: bound device PNP0A03:00 to driver pci_root
[ 0.085129] bus: 'acpi': add driver pci_link
[ 0.085141] bus: 'acpi': driver_probe_device: matched device PNP0C0F:00 with driver pci_link
[ 0.085146] bus: 'acpi': really_probe: probing driver pci_link with device PNP0C0F:00
[ 0.085365] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.085453] driver: 'PNP0C0F:00': driver_bound: bound to device 'pci_link'
[ 0.085459] bus: 'acpi': really_probe: bound device PNP0C0F:00 to driver pci_link
[ 0.085465] bus: 'acpi': driver_probe_device: matched device PNP0C0F:01 with driver pci_link
[ 0.085470] bus: 'acpi': really_probe: probing driver pci_link with device PNP0C0F:01
[ 0.085665] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.085751] driver: 'PNP0C0F:01': driver_bound: bound to device 'pci_link'
[ 0.085756] bus: 'acpi': really_probe: bound device PNP0C0F:01 to driver pci_link
[ 0.085762] bus: 'acpi': driver_probe_device: matched device PNP0C0F:02 with driver pci_link
[ 0.085767] bus: 'acpi': really_probe: probing driver pci_link with device PNP0C0F:02
[ 0.085959] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.086075] driver: 'PNP0C0F:02': driver_bound: bound to device 'pci_link'
[ 0.086080] bus: 'acpi': really_probe: bound device PNP0C0F:02 to driver pci_link
[ 0.086087] bus: 'acpi': driver_probe_device: matched device PNP0C0F:03 with driver pci_link
[ 0.086091] bus: 'acpi': really_probe: probing driver pci_link with device PNP0C0F:03
[ 0.086285] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.086371] driver: 'PNP0C0F:03': driver_bound: bound to device 'pci_link'
[ 0.086376] bus: 'acpi': really_probe: bound device PNP0C0F:03 to driver pci_link
[ 0.086382] bus: 'acpi': driver_probe_device: matched device PNP0C0F:04 with driver pci_link
[ 0.086387] bus: 'acpi': really_probe: probing driver pci_link with device PNP0C0F:04
[ 0.086578] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.086664] driver: 'PNP0C0F:04': driver_bound: bound to device 'pci_link'
[ 0.086669] bus: 'acpi': really_probe: bound device PNP0C0F:04 to driver pci_link
[ 0.086675] bus: 'acpi': driver_probe_device: matched device PNP0C0F:05 with driver pci_link
[ 0.086680] bus: 'acpi': really_probe: probing driver pci_link with device PNP0C0F:05
[ 0.086844] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.086931] driver: 'PNP0C0F:05': driver_bound: bound to device 'pci_link'
[ 0.086936] bus: 'acpi': really_probe: bound device PNP0C0F:05 to driver pci_link
[ 0.086942] bus: 'acpi': driver_probe_device: matched device PNP0C0F:06 with driver pci_link
[ 0.086947] bus: 'acpi': really_probe: probing driver pci_link with device PNP0C0F:06
[ 0.087119] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.087207] driver: 'PNP0C0F:06': driver_bound: bound to device 'pci_link'
[ 0.087212] bus: 'acpi': really_probe: bound device PNP0C0F:06 to driver pci_link
[ 0.087218] bus: 'acpi': driver_probe_device: matched device PNP0C0F:07 with driver pci_link
[ 0.087223] bus: 'acpi': really_probe: probing driver pci_link with device PNP0C0F:07
[ 0.087386] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.087474] driver: 'PNP0C0F:07': driver_bound: bound to device 'pci_link'
[ 0.087479] bus: 'acpi': really_probe: bound device PNP0C0F:07 to driver pci_link
[ 0.087599] bus: 'pnp': registered
[ 0.087611] device class 'misc': registering
[ 0.087669] device: 'vga_arbiter': device_add
[ 0.087688] PM: Adding info for No Bus:vga_arbiter
[ 0.087753] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.087760] vgaarb: loaded
[ 0.087903] device class 'scsi_host': registering
[ 0.088037] bus: 'scsi': registered
[ 0.088041] device class 'scsi_device': registering
[ 0.088097] SCSI subsystem initialized
[ 0.088102] device class 'pcmcia_socket': registering
[ 0.088197] bus: 'serio': registered
[ 0.088224] device class 'input': registering
[ 0.088284] device class 'rtc': registering
[ 0.088331] device class 'power_supply': registering
[ 0.088382] device class 'hwmon': registering
[ 0.088429] device class 'thermal': registering
[ 0.088474] device class 'leds': registering
[ 0.088569] bus: 'ac97': registered
[ 0.088573] PCI: Using ACPI for IRQ routing
[ 0.088851] device class 'net': registering
[ 0.088912] device: 'lo': device_add
[ 0.088972] PM: Adding info for No Bus:lo
[ 0.089097] Switching to clocksource tsc
[ 0.091003] pnp: PnP ACPI init
[ 0.091015] device: 'pnp0': device_add
[ 0.091037] PM: Adding info for No Bus:pnp0
[ 0.091044] ACPI: bus type pnp registered
[ 0.092787] device: '00:00': device_add
[ 0.092824] bus: 'pnp': add device 00:00
[ 0.092840] PM: Adding info for pnp:00:00
[ 0.093036] device: '00:01': device_add
[ 0.093085] bus: 'pnp': add device 00:01
[ 0.093097] PM: Adding info for pnp:00:01
[ 0.093265] device: '00:02': device_add
[ 0.093286] bus: 'pnp': add device 00:02
[ 0.093298] PM: Adding info for pnp:00:02
[ 0.093382] device: '00:03': device_add
[ 0.093403] bus: 'pnp': add device 00:03
[ 0.093413] PM: Adding info for pnp:00:03
[ 0.093483] device: '00:04': device_add
[ 0.093503] bus: 'pnp': add device 00:04
[ 0.093514] PM: Adding info for pnp:00:04
[ 0.093589] device: '00:05': device_add
[ 0.093611] bus: 'pnp': add device 00:05
[ 0.093622] PM: Adding info for pnp:00:05
[ 0.093692] device: '00:06': device_add
[ 0.093715] bus: 'pnp': add device 00:06
[ 0.093727] PM: Adding info for pnp:00:06
[ 0.093798] device: '00:07': device_add
[ 0.093820] bus: 'pnp': add device 00:07
[ 0.093832] PM: Adding info for pnp:00:07
[ 0.093931] device: '00:08': device_add
[ 0.093954] bus: 'pnp': add device 00:08
[ 0.093968] PM: Adding info for pnp:00:08
[ 0.094403] device: '00:09': device_add
[ 0.094429] bus: 'pnp': add device 00:09
[ 0.094441] PM: Adding info for pnp:00:09
[ 0.094699] device: '00:0a': device_add
[ 0.094723] bus: 'pnp': add device 00:0a
[ 0.094736] PM: Adding info for pnp:00:0a
[ 0.095076] device: '00:0b': device_add
[ 0.095104] bus: 'pnp': add device 00:0b
[ 0.095117] PM: Adding info for pnp:00:0b
[ 0.096510] pnp: PnP ACPI: found 12 devices
[ 0.096514] ACPI: ACPI bus type pnp unregistered
[ 0.096521] PnPBIOS: Disabled by ACPI PNP
[ 0.096526] bus: 'pnp': add driver system
[ 0.096538] bus: 'pnp': driver_probe_device: matched device 00:00 with driver system
[ 0.096544] bus: 'pnp': really_probe: probing driver system with device 00:00
[ 0.096557] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 0.096564] system 00:00: iomem range 0xc0000-0xc3fff could not be reserved
[ 0.096570] system 00:00: iomem range 0xc4000-0xc7fff could not be reserved
[ 0.096576] system 00:00: iomem range 0xc8000-0xcbfff could not be reserved
[ 0.096582] system 00:00: iomem range 0xcc000-0xcffff could not be reserved
[ 0.096588] system 00:00: iomem range 0xd0000-0xd3fff could not be reserved
[ 0.096594] system 00:00: iomem range 0xdc000-0xdffff could not be reserved
[ 0.096600] system 00:00: iomem range 0xe0000-0xe3fff could not be reserved
[ 0.096606] system 00:00: iomem range 0xe4000-0xe7fff could not be reserved
[ 0.096612] system 00:00: iomem range 0xe8000-0xebfff could not be reserved
[ 0.096618] system 00:00: iomem range 0xec000-0xeffff could not be reserved
[ 0.096624] system 00:00: iomem range 0xf0000-0xfffff could not be reserved
[ 0.096630] system 00:00: iomem range 0x100000-0x3fffffff could not be reserved
[ 0.096637] system 00:00: iomem range 0xfec00000-0xffffffff could not be reserved
[ 0.096641] driver: '00:00': driver_bound: bound to device 'system'
[ 0.096646] bus: 'pnp': really_probe: bound device 00:00 to driver system
[ 0.096653] bus: 'pnp': driver_probe_device: matched device 00:02 with driver system
[ 0.096657] bus: 'pnp': really_probe: probing driver system with device 00:02
[ 0.096670] system 00:02: ioport range 0x1000-0x107f has been reserved
[ 0.096677] system 00:02: ioport range 0x1180-0x11bf has been reserved
[ 0.096682] system 00:02: ioport range 0x15e0-0x15ef has been reserved
[ 0.096688] system 00:02: ioport range 0x1600-0x167f has been reserved
[ 0.096693] driver: '00:02': driver_bound: bound to device 'system'
[ 0.096697] bus: 'pnp': really_probe: bound device 00:02 to driver system
[ 0.096771] device class 'mem': registering
[ 0.096823] device: 'mem': device_add
[ 0.096844] PM: Adding info for No Bus:mem
[ 0.096918] device: 'kmem': device_add
[ 0.096933] PM: Adding info for No Bus:kmem
[ 0.096978] device: 'null': device_add
[ 0.096992] PM: Adding info for No Bus:null
[ 0.097038] device: 'port': device_add
[ 0.097053] PM: Adding info for No Bus:port
[ 0.097098] device: 'zero': device_add
[ 0.097115] PM: Adding info for No Bus:zero
[ 0.097162] device: 'full': device_add
[ 0.097176] PM: Adding info for No Bus:full
[ 0.097222] device: 'random': device_add
[ 0.097236] PM: Adding info for No Bus:random
[ 0.097284] device: 'urandom': device_add
[ 0.097297] PM: Adding info for No Bus:urandom
[ 0.097347] device: 'kmsg': device_add
[ 0.097361] PM: Adding info for No Bus:kmsg
[ 0.097406] device class 'firmware': registering
[ 0.132042] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.132048] pci 0000:00:01.0: IO window: 0x3000-0x3fff
[ 0.132055] pci 0000:00:01.0: MEM window: 0xd0100000-0xd01fffff
[ 0.132062] pci 0000:00:01.0: PREFETCH window: 0xe8000000-0xefffffff
[ 0.132076] pci 0000:02:00.0: CardBus bridge, secondary bus 0000:03
[ 0.132081] pci 0000:02:00.0: IO window: 0x004000-0x0040ff
[ 0.132088] pci 0000:02:00.0: IO window: 0x004400-0x0044ff
[ 0.132095] pci 0000:02:00.0: PREFETCH window: 0xf0000000-0xf3ffffff
[ 0.132103] pci 0000:02:00.0: MEM window: 0xd4000000-0xd7ffffff
[ 0.132110] pci 0000:02:00.1: CardBus bridge, secondary bus 0000:07
[ 0.132114] pci 0000:02:00.1: IO window: 0x004800-0x0048ff
[ 0.132121] pci 0000:02:00.1: IO window: 0x004c00-0x004cff
[ 0.132128] pci 0000:02:00.1: PREFETCH window: 0xf4000000-0xf7ffffff
[ 0.132136] pci 0000:02:00.1: MEM window: 0xd8000000-0xdbffffff
[ 0.132143] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
[ 0.132149] pci 0000:00:1e.0: IO window: 0x4000-0x8fff
[ 0.132157] pci 0000:00:1e.0: MEM window: 0xd0200000-0xdfffffff
[ 0.132165] pci 0000:00:1e.0: PREFETCH window: 0xf0000000-0xf7ffffff
[ 0.132189] pci 0000:00:1e.0: setting latency timer to 64
[ 0.132706] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[ 0.132712] PCI: setting IRQ 11 as level-triggered
[ 0.132721] pci 0000:02:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 0.133231] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[ 0.133239] pci 0000:02:00.1: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 0.133252] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.133258] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.133263] pci_bus 0000:01: resource 0 io: [0x3000-0x3fff]
[ 0.133268] pci_bus 0000:01: resource 1 mem: [0xd0100000-0xd01fffff]
[ 0.133274] pci_bus 0000:01: resource 2 pref mem [0xe8000000-0xefffffff]
[ 0.133279] pci_bus 0000:02: resource 0 io: [0x4000-0x8fff]
[ 0.133284] pci_bus 0000:02: resource 1 mem: [0xd0200000-0xdfffffff]
[ 0.133289] pci_bus 0000:02: resource 2 pref mem [0xf0000000-0xf7ffffff]
[ 0.133294] pci_bus 0000:02: resource 3 io: [0x00-0xffff]
[ 0.133299] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
[ 0.133304] pci_bus 0000:03: resource 0 io: [0x4000-0x40ff]
[ 0.133309] pci_bus 0000:03: resource 1 io: [0x4400-0x44ff]
[ 0.133314] pci_bus 0000:03: resource 2 pref mem [0xf0000000-0xf3ffffff]
[ 0.133319] pci_bus 0000:03: resource 3 mem: [0xd4000000-0xd7ffffff]
[ 0.133325] pci_bus 0000:07: resource 0 io: [0x4800-0x48ff]
[ 0.133329] pci_bus 0000:07: resource 1 io: [0x4c00-0x4cff]
[ 0.133335] pci_bus 0000:07: resource 2 pref mem [0xf4000000-0xf7ffffff]
[ 0.133340] pci_bus 0000:07: resource 3 mem: [0xd8000000-0xdbffffff]
[ 0.133428] NET: Registered protocol family 2
[ 0.133590] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.134259] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.135771] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.136264] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.136269] TCP reno registered
[ 0.136482] NET: Registered protocol family 1
[ 0.136582] pci 0000:01:00.0: Boot video device
[ 0.136627] pci 0000:02:08.0: Firmware left e100 interrupts enabled; disabling
[ 0.136727] Trying to unpack rootfs image as initramfs...
[ 0.938974] Freeing initrd memory: 13973k freed
[ 0.966467] Registering sysdev class 'i8259'
[ 0.966731] Registering sys device of class 'i8259'
[ 0.966740] Registering sys device 'i82590'
[ 0.966790] Simple Boot Flag at 0x35 set to 0x1
[ 0.966796] Registering sysdev class 'i8237'
[ 0.966842] Registering sys device of class 'i8237'
[ 0.966849] Registering sys device 'i82370'
[ 0.966904] Registering sysdev class 'machinecheck'
[ 0.966960] Registering sys device of class 'machinecheck'
[ 0.966968] Registering sys device 'machinecheck0'
[ 0.967031] device: 'mcelog': device_add
[ 0.967060] PM: Adding info for No Bus:mcelog
[ 0.967126] device class 'msr': registering
[ 0.967188] device: 'msr0': device_add
[ 0.967207] PM: Adding info for No Bus:msr0
[ 0.967259] device class 'cpuid': registering
[ 0.967310] device: 'cpu0': device_add
[ 0.967329] PM: Adding info for No Bus:cpu0
[ 0.967379] Registering sysdev class 'ioapic'
[ 0.967429] Registering platform device 'pcspkr'. Parent at platform
[ 0.967433] device: 'pcspkr': device_add
[ 0.967443] bus: 'platform': add device pcspkr
[ 0.967453] PM: Adding info for platform:pcspkr
[ 0.967504] Registering platform device 'microcode'. Parent at platform
[ 0.967508] device: 'microcode': device_add
[ 0.967515] bus: 'platform': add device microcode
[ 0.967523] PM: Adding info for platform:microcode
[ 0.967577] microcode: CPU0 sig=0xf27, pf=0x8, revision=0x26
[ 0.967584] device: 'microcode': device_add
[ 0.967598] PM: Adding info for No Bus:microcode
[ 0.967668] Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.967883] Registering sysdev class 'timekeeping'
[ 0.967935] Registering sys device of class 'timekeeping'
[ 0.967942] Registering sys device 'timekeeping0'
[ 0.967985] Registering sysdev class 'clocksource'
[ 0.968032] Registering sys device of class 'clocksource'
[ 0.968039] Registering sys device 'clocksource0'
[ 0.968110] device: 'snapshot': device_add
[ 0.968126] PM: Adding info for No Bus:snapshot
[ 0.968233] audit: initializing netlink socket (disabled)
[ 0.968264] type=2000 audit(1258968991.967:1): initialized
[ 0.968766] fuse init (API version 7.13)
[ 0.968787] device: 'fuse': device_add
[ 0.968807] PM: Adding info for No Bus:fuse
[ 0.968935] msgmni has been set to 1764
[ 0.969255] alg: No test for stdrng (krng)
[ 0.969286] device class 'bsg': registering
[ 0.969350] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.969356] io scheduler noop registered
[ 0.969361] io scheduler anticipatory registered
[ 0.969364] io scheduler deadline registered
[ 0.969380] io scheduler cfq registered (default)
[ 0.969449] device: 'fbcon': device_add
[ 0.969467] PM: Adding info for No Bus:fbcon
[ 0.969527] Registering sysdev class 'irqrouter'
[ 0.969573] Registering sys device of class 'irqrouter'
[ 0.969581] Registering sys device 'irqrouter0'
[ 0.969860] device: 'pnp1': device_add
[ 0.969873] PM: Adding info for No Bus:pnp1
[ 0.969878] isapnp: Scanning for PnP cards...
[ 1.325938] isapnp: No Plug & Play device found
[ 1.325970] device: 'tty': device_add
[ 1.325991] PM: Adding info for No Bus:tty
[ 1.326063] device: 'console': device_add
[ 1.326077] PM: Adding info for No Bus:console
[ 1.326127] device: 'tty0': device_add
[ 1.326142] PM: Adding info for No Bus:tty0
[ 1.326190] device class 'vc': registering
[ 1.326241] device: 'vcs': device_add
[ 1.326258] PM: Adding info for No Bus:vcs
[ 1.326307] device: 'vcsa': device_add
[ 1.326321] PM: Adding info for No Bus:vcsa
[ 1.326370] device: 'vcs1': device_add
[ 1.326384] PM: Adding info for No Bus:vcs1
[ 1.326434] device: 'vcsa1': device_add
[ 1.326449] PM: Adding info for No Bus:vcsa1
[ 1.326500] device: 'tty1': device_add
[ 1.326515] PM: Adding info for No Bus:tty1
[ 1.326563] device: 'tty2': device_add
[ 1.326577] PM: Adding info for No Bus:tty2
[ 1.326626] device: 'tty3': device_add
[ 1.326644] PM: Adding info for No Bus:tty3
[ 1.326691] device: 'tty4': device_add
[ 1.326706] PM: Adding info for No Bus:tty4
[ 1.326757] device: 'tty5': device_add
[ 1.326772] PM: Adding info for No Bus:tty5
[ 1.326822] device: 'tty6': device_add
[ 1.326836] PM: Adding info for No Bus:tty6
[ 1.326884] device: 'tty7': device_add
[ 1.326899] PM: Adding info for No Bus:tty7
[ 1.326949] device: 'tty8': device_add
[ 1.326964] PM: Adding info for No Bus:tty8
[ 1.327056] device: 'tty9': device_add
[ 1.327072] PM: Adding info for No Bus:tty9
[ 1.327121] device: 'tty10': device_add
[ 1.327136] PM: Adding info for No Bus:tty10
[ 1.327183] device: 'tty11': device_add
[ 1.327199] PM: Adding info for No Bus:tty11
[ 1.327246] device: 'tty12': device_add
[ 1.327262] PM: Adding info for No Bus:tty12
[ 1.327309] device: 'tty13': device_add
[ 1.327324] PM: Adding info for No Bus:tty13
[ 1.327372] device: 'tty14': device_add
[ 1.327390] PM: Adding info for No Bus:tty14
[ 1.327437] device: 'tty15': device_add
[ 1.327454] PM: Adding info for No Bus:tty15
[ 1.327501] device: 'tty16': device_add
[ 1.327517] PM: Adding info for No Bus:tty16
[ 1.327564] device: 'tty17': device_add
[ 1.327583] PM: Adding info for No Bus:tty17
[ 1.327633] device: 'tty18': device_add
[ 1.327649] PM: Adding info for No Bus:tty18
[ 1.327698] device: 'tty19': device_add
[ 1.327715] PM: Adding info for No Bus:tty19
[ 1.327764] device: 'tty20': device_add
[ 1.327786] PM: Adding info for No Bus:tty20
[ 1.327834] device: 'tty21': device_add
[ 1.327853] PM: Adding info for No Bus:tty21
[ 1.327903] device: 'tty22': device_add
[ 1.327921] PM: Adding info for No Bus:tty22
[ 1.327969] device: 'tty23': device_add
[ 1.327986] PM: Adding info for No Bus:tty23
[ 1.328178] device: 'tty24': device_add
[ 1.328200] PM: Adding info for No Bus:tty24
[ 1.328248] device: 'tty25': device_add
[ 1.328266] PM: Adding info for No Bus:tty25
[ 1.328312] device: 'tty26': device_add
[ 1.328330] PM: Adding info for No Bus:tty26
[ 1.328377] device: 'tty27': device_add
[ 1.328394] PM: Adding info for No Bus:tty27
[ 1.328440] device: 'tty28': device_add
[ 1.328458] PM: Adding info for No Bus:tty28
[ 1.328506] device: 'tty29': device_add
[ 1.328525] PM: Adding info for No Bus:tty29
[ 1.328571] device: 'tty30': device_add
[ 1.328591] PM: Adding info for No Bus:tty30
[ 1.328637] device: 'tty31': device_add
[ 1.328655] PM: Adding info for No Bus:tty31
[ 1.328702] device: 'tty32': device_add
[ 1.328721] PM: Adding info for No Bus:tty32
[ 1.328767] device: 'tty33': device_add
[ 1.328786] PM: Adding info for No Bus:tty33
[ 1.328834] device: 'tty34': device_add
[ 1.328853] PM: Adding info for No Bus:tty34
[ 1.328900] device: 'tty35': device_add
[ 1.328921] PM: Adding info for No Bus:tty35
[ 1.328968] device: 'tty36': device_add
[ 1.328989] PM: Adding info for No Bus:tty36
[ 1.329059] device: 'tty37': device_add
[ 1.329079] PM: Adding info for No Bus:tty37
[ 1.329126] device: 'tty38': device_add
[ 1.329145] PM: Adding info for No Bus:tty38
[ 1.329193] device: 'tty39': device_add
[ 1.329213] PM: Adding info for No Bus:tty39
[ 1.329260] device: 'tty40': device_add
[ 1.329279] PM: Adding info for No Bus:tty40
[ 1.329327] device: 'tty41': device_add
[ 1.329347] PM: Adding info for No Bus:tty41
[ 1.329394] device: 'tty42': device_add
[ 1.329414] PM: Adding info for No Bus:tty42
[ 1.329461] device: 'tty43': device_add
[ 1.329481] PM: Adding info for No Bus:tty43
[ 1.329528] device: 'tty44': device_add
[ 1.329549] PM: Adding info for No Bus:tty44
[ 1.329596] device: 'tty45': device_add
[ 1.329619] PM: Adding info for No Bus:tty45
[ 1.329668] device: 'tty46': device_add
[ 1.329688] PM: Adding info for No Bus:tty46
[ 1.329736] device: 'tty47': device_add
[ 1.329756] PM: Adding info for No Bus:tty47
[ 1.329803] device: 'tty48': device_add
[ 1.329824] PM: Adding info for No Bus:tty48
[ 1.329871] device: 'tty49': device_add
[ 1.329892] PM: Adding info for No Bus:tty49
[ 1.329939] device: 'tty50': device_add
[ 1.329960] PM: Adding info for No Bus:tty50
[ 1.330128] device: 'tty51': device_add
[ 1.330153] PM: Adding info for No Bus:tty51
[ 1.330204] device: 'tty52': device_add
[ 1.330226] PM: Adding info for No Bus:tty52
[ 1.330271] device: 'tty53': device_add
[ 1.330293] PM: Adding info for No Bus:tty53
[ 1.330339] device: 'tty54': device_add
[ 1.330361] PM: Adding info for No Bus:tty54
[ 1.330407] device: 'tty55': device_add
[ 1.330429] PM: Adding info for No Bus:tty55
[ 1.330475] device: 'tty56': device_add
[ 1.330500] PM: Adding info for No Bus:tty56
[ 1.330546] device: 'tty57': device_add
[ 1.330569] PM: Adding info for No Bus:tty57
[ 1.330615] device: 'tty58': device_add
[ 1.330637] PM: Adding info for No Bus:tty58
[ 1.330690] device: 'tty59': device_add
[ 1.330713] PM: Adding info for No Bus:tty59
[ 1.330760] device: 'tty60': device_add
[ 1.330783] PM: Adding info for No Bus:tty60
[ 1.330829] device: 'tty61': device_add
[ 1.330852] PM: Adding info for No Bus:tty61
[ 1.330898] device: 'tty62': device_add
[ 1.330921] PM: Adding info for No Bus:tty62
[ 1.330967] device: 'tty63': device_add
[ 1.330992] PM: Adding info for No Bus:tty63
[ 1.331167] device: 'ptmx': device_add
[ 1.331190] PM: Adding info for No Bus:ptmx
[ 1.331259] bus: 'virtio': add driver virtio_console
[ 1.331316] device: 'hpet': device_add
[ 1.331336] PM: Adding info for No Bus:hpet
[ 1.331397] bus: 'acpi': add driver hpet
[ 1.331489] device: 'nvram': device_add
[ 1.331507] PM: Adding info for No Bus:nvram
[ 1.331558] Non-volatile memory driver v1.3
[ 1.331562] Linux agpgart interface v0.103
[ 1.331568] bus: 'pci': add driver agpgart-intel
[ 1.331578] bus: 'pci': driver_probe_device: matched device 0000:00:00.0 with driver agpgart-intel
[ 1.331584] bus: 'pci': really_probe: probing driver agpgart-intel with device 0000:00:00.0
[ 1.331604] agpgart-intel 0000:00:00.0: Intel 845G Chipset
[ 1.335611] device: 'agpgart': device_add
[ 1.335662] PM: Adding info for No Bus:agpgart
[ 1.335780] agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xe0000000
[ 1.335787] driver: '0000:00:00.0': driver_bound: bound to device 'agpgart-intel'
[ 1.335793] bus: 'pci': really_probe: bound device 0000:00:00.0 to driver agpgart-intel
[ 1.335864] bus: 'platform': add driver ipmi
[ 1.335916] ipmi message handler version 39.2
[ 1.335935] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.335954] Registering platform device 'serial8250'. Parent at platform
[ 1.335958] device: 'serial8250': device_add
[ 1.335967] bus: 'platform': add device serial8250
[ 1.335978] PM: Adding info for platform:serial8250
[ 1.336137] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
[ 1.336147] device: 'ttyS0': device_add
[ 1.336186] PM: Adding info for No Bus:ttyS0
[ 1.336245] device: 'ttyS1': device_add
[ 1.336268] PM: Adding info for No Bus:ttyS1
[ 1.336325] device: 'ttyS2': device_add
[ 1.336349] PM: Adding info for No Bus:ttyS2
[ 1.336405] device: 'ttyS3': device_add
[ 1.336428] PM: Adding info for No Bus:ttyS3
[ 1.336475] bus: 'platform': add driver serial8250
[ 1.336486] bus: 'platform': driver_probe_device: matched device serial8250 with driver serial8250
[ 1.336491] bus: 'platform': really_probe: probing driver serial8250 with device serial8250
[ 1.336499] driver: 'serial8250': driver_bound: bound to device 'serial8250'
[ 1.336503] bus: 'platform': really_probe: bound device serial8250 to driver serial8250
[ 1.336553] bus: 'pnp': add driver serial
[ 1.336719] bus: 'pnp': driver_probe_device: matched device 00:09 with driver serial
[ 1.336725] bus: 'pnp': really_probe: probing driver serial with device 00:09
[ 1.336758] device: 'ttyS0': device_unregister
[ 1.336762] PM: Removing info for No Bus:ttyS0
[ 1.336832] device: 'ttyS0': device_create_release
[ 1.336897] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
[ 1.336905] device: 'ttyS0': device_add
[ 1.336929] PM: Adding info for No Bus:ttyS0
[ 1.336977] driver: '00:09': driver_bound: bound to device 'serial'
[ 1.336982] bus: 'pnp': really_probe: bound device 00:09 to driver serial
[ 1.337104] bus: 'pci': add driver serial
[ 1.337129] bus: 'pci': driver_probe_device: matched device 0000:00:1f.6 with driver serial
[ 1.337134] bus: 'pci': really_probe: probing driver serial with device 0000:00:1f.6
[ 1.337162] serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 1.337173] serial 0000:00:1f.6: PCI INT B disabled
[ 1.337287] bus: 'isa': registered
[ 1.337293] device: 'isa': device_add
[ 1.337306] PM: Adding info for No Bus:isa
[ 1.337371] device: 'ram0': device_add
[ 1.337401] PM: Adding info for No Bus:ram0
[ 1.337486] device: '1:0': device_add
[ 1.337501] PM: Adding info for No Bus:1:0
[ 1.337564] device: 'ram1': device_add
[ 1.337587] PM: Adding info for No Bus:ram1
[ 1.337665] device: '1:1': device_add
[ 1.337678] PM: Adding info for No Bus:1:1
[ 1.337730] device: 'ram2': device_add
[ 1.337751] PM: Adding info for No Bus:ram2
[ 1.337830] device: '1:2': device_add
[ 1.337845] PM: Adding info for No Bus:1:2
[ 1.337901] device: 'ram3': device_add
[ 1.337922] PM: Adding info for No Bus:ram3
[ 1.337999] device: '1:3': device_add
[ 1.338062] PM: Adding info for No Bus:1:3
[ 1.338127] device: 'ram4': device_add
[ 1.338150] PM: Adding info for No Bus:ram4
[ 1.338228] device: '1:4': device_add
[ 1.338241] PM: Adding info for No Bus:1:4
[ 1.338292] device: 'ram5': device_add
[ 1.338314] PM: Adding info for No Bus:ram5
[ 1.338390] device: '1:5': device_add
[ 1.338404] PM: Adding info for No Bus:1:5
[ 1.338455] device: 'ram6': device_add
[ 1.338479] PM: Adding info for No Bus:ram6
[ 1.338557] device: '1:6': device_add
[ 1.338570] PM: Adding info for No Bus:1:6
[ 1.338621] device: 'ram7': device_add
[ 1.338643] PM: Adding info for No Bus:ram7
[ 1.338721] device: '1:7': device_add
[ 1.338742] PM: Adding info for No Bus:1:7
[ 1.338794] device: 'ram8': device_add
[ 1.338817] PM: Adding info for No Bus:ram8
[ 1.338893] device: '1:8': device_add
[ 1.338907] PM: Adding info for No Bus:1:8
[ 1.338961] device: 'ram9': device_add
[ 1.338985] PM: Adding info for No Bus:ram9
[ 1.339113] device: '1:9': device_add
[ 1.339127] PM: Adding info for No Bus:1:9
[ 1.339178] device: 'ram10': device_add
[ 1.339206] PM: Adding info for No Bus:ram10
[ 1.339283] device: '1:10': device_add
[ 1.339297] PM: Adding info for No Bus:1:10
[ 1.339355] device: 'ram11': device_add
[ 1.339380] PM: Adding info for No Bus:ram11
[ 1.339456] device: '1:11': device_add
[ 1.339469] PM: Adding info for No Bus:1:11
[ 1.339519] device: 'ram12': device_add
[ 1.339543] PM: Adding info for No Bus:ram12
[ 1.339623] device: '1:12': device_add
[ 1.339637] PM: Adding info for No Bus:1:12
[ 1.339688] device: 'ram13': device_add
[ 1.339711] PM: Adding info for No Bus:ram13
[ 1.339786] device: '1:13': device_add
[ 1.339800] PM: Adding info for No Bus:1:13
[ 1.339850] device: 'ram14': device_add
[ 1.339874] PM: Adding info for No Bus:ram14
[ 1.339953] device: '1:14': device_add
[ 1.339967] PM: Adding info for No Bus:1:14
[ 1.340140] device: 'ram15': device_add
[ 1.340164] PM: Adding info for No Bus:ram15
[ 1.340244] device: '1:15': device_add
[ 1.340260] PM: Adding info for No Bus:1:15
[ 1.340309] brd: module loaded
[ 1.340351] device: 'loop0': device_add
[ 1.340375] PM: Adding info for No Bus:loop0
[ 1.340457] device: '7:0': device_add
[ 1.340471] PM: Adding info for No Bus:7:0
[ 1.340527] device: 'loop1': device_add
[ 1.340551] PM: Adding info for No Bus:loop1
[ 1.340630] device: '7:1': device_add
[ 1.340643] PM: Adding info for No Bus:7:1
[ 1.340694] device: 'loop2': device_add
[ 1.340716] PM: Adding info for No Bus:loop2
[ 1.340794] device: '7:2': device_add
[ 1.340808] PM: Adding info for No Bus:7:2
[ 1.340859] device: 'loop3': device_add
[ 1.340882] PM: Adding info for No Bus:loop3
[ 1.340961] device: '7:3': device_add
[ 1.340975] PM: Adding info for No Bus:7:3
[ 1.341048] device: 'loop4': device_add
[ 1.341071] PM: Adding info for No Bus:loop4
[ 1.341146] device: '7:4': device_add
[ 1.341160] PM: Adding info for No Bus:7:4
[ 1.341212] device: 'loop5': device_add
[ 1.341238] PM: Adding info for No Bus:loop5
[ 1.341314] device: '7:5': device_add
[ 1.341328] PM: Adding info for No Bus:7:5
[ 1.341379] device: 'loop6': device_add
[ 1.341404] PM: Adding info for No Bus:loop6
[ 1.341482] device: '7:6': device_add
[ 1.341497] PM: Adding info for No Bus:7:6
[ 1.341548] device: 'loop7': device_add
[ 1.341572] PM: Adding info for No Bus:loop7
[ 1.341647] device: '7:7': device_add
[ 1.341663] PM: Adding info for No Bus:7:7
[ 1.341724] loop: module loaded
[ 1.341730] Uniform Multi-Platform E-IDE driver
[ 1.341789] bus: 'ide': registered
[ 1.341793] device class 'ide_port': registering
[ 1.341888] piix 0000:00:1f.1: IDE controller (0x8086:0x248a rev 0x02)
[ 1.341904] pci 0000:00:1f.1: enabling device (0005 -> 0007)
[ 1.342521] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[ 1.342531] pci 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 1.342570] piix 0000:00:1f.1: not 100% native mode: will probe irqs later
[ 1.342582] ide0: BM-DMA at 0x1860-0x1867
[ 1.342596] ide1: BM-DMA at 0x1868-0x186f
[ 1.342607] Probing IDE interface ide0...
[ 1.606192] hda: IC25N040ATCS04-0, ATA DISK drive
[ 2.218016] device: 'ide0': device_add
[ 2.218037] PM: Adding info for No Bus:ide0
[ 2.218044] device: 'ide0': device_add
[ 2.218061] PM: Adding info for No Bus:ide0
[ 2.218163] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 2.218379] hda: UDMA/100 mode selected
[ 2.218597] Probing IDE interface ide1...
[ 2.737012] device: 'ide1': device_add
[ 2.737023] PM: Adding info for No Bus:ide1
[ 2.737028] device: 'ide1': device_add
[ 2.737042] PM: Adding info for No Bus:ide1
[ 2.737117] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 2.765152] ide1 at 0x170-0x177,0x376 on irq 15
[ 2.765221] device: '0.0': device_add
[ 2.765231] bus: 'ide': add device 0.0
[ 2.765247] PM: Adding info for ide:0.0
[ 2.765361] bus: 'pci': add driver PIIX_IDE
[ 2.765374] bus: 'pci': driver_probe_device: matched device 0000:00:1f.1 with driver PIIX_IDE
[ 2.765380] bus: 'pci': really_probe: probing driver PIIX_IDE with device 0000:00:1f.1
[ 2.765389] driver: '0000:00:1f.1': driver_bound: bound to device 'PIIX_IDE'
[ 2.765394] bus: 'pci': really_probe: bound device 0000:00:1f.1 to driver PIIX_IDE
[ 2.765452] ide-gd driver 1.18
[ 2.765457] bus: 'ide': add driver ide-gd
[ 2.765464] bus: 'ide': driver_probe_device: matched device 0.0 with driver ide-gd
[ 2.765469] bus: 'ide': really_probe: probing driver ide-gd with device 0.0
[ 2.765482] device: '0.0': device_add
[ 2.765491] PM: Adding info for No Bus:0.0
[ 2.765504] hda: max request size: 128KiB
[ 2.765888] hda: 78140160 sectors (40007 MB) w/1768KiB Cache, CHS=65535/16/63
[ 2.765896] hda: cache flushes not supported
[ 2.765902] device: 'hda': device_add
[ 2.765942] PM: Adding info for No Bus:hda
[ 2.765986] hda: hda1 hda2 < hda5 >
[ 2.799810] device: 'hda1': device_add
[ 2.799844] PM: Adding info for No Bus:hda1
[ 2.799854] device: 'hda2': device_add
[ 2.799880] PM: Adding info for No Bus:hda2
[ 2.799889] device: 'hda5': device_add
[ 2.799915] PM: Adding info for No Bus:hda5
[ 2.800198] device: '3:0': device_add
[ 2.800226] PM: Adding info for No Bus:3:0
[ 2.800287] driver: '0.0': driver_bound: bound to device 'ide-gd'
[ 2.800293] bus: 'ide': really_probe: bound device 0.0 to driver ide-gd
[ 2.800353] device class 'scsi_disk': registering
[ 2.800408] bus: 'scsi': add driver sd
[ 2.800494] device class 'scsi_generic': registering
[ 2.800545] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 2.800549] e100: Copyright(c) 1999-2006 Intel Corporation
[ 2.800555] bus: 'pci': add driver e100
[ 2.800572] bus: 'pci': driver_probe_device: matched device 0000:02:08.0 with driver e100
[ 2.800577] bus: 'pci': really_probe: probing driver e100 with device 0000:02:08.0
[ 2.801148] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
[ 2.801157] e100 0000:02:08.0: PCI INT A -> Link[LNKE] -> GSI 11 (level, low) -> IRQ 11
[ 2.826365] e100 0000:02:08.0: PME# disabled
[ 2.826385] device: 'eth0': device_add
[ 2.826453] PM: Adding info for No Bus:eth0
[ 2.826831] e100: eth0: e100_probe: addr 0xd0200000, irq 11, MAC addr 00:09:6b:02:c2:8a
[ 2.826837] driver: '0000:02:08.0': driver_bound: bound to device 'e100'
[ 2.826843] bus: 'pci': really_probe: bound device 0000:02:08.0 to driver e100
[ 2.826923] bus: 'pci': add driver yenta_cardbus
[ 2.826939] bus: 'pci': driver_probe_device: matched device 0000:02:00.0 with driver yenta_cardbus
[ 2.826944] bus: 'pci': really_probe: probing driver yenta_cardbus with device 0000:02:00.0
[ 2.826968] yenta_cardbus 0000:02:00.0: CardBus bridge found [1014:0512]
[ 2.826990] yenta_cardbus 0000:02:00.0: Using INTVAL to route CSC interrupts to PCI
[ 2.826995] yenta_cardbus 0000:02:00.0: Routing CardBus interrupts to PCI
[ 2.827050] yenta_cardbus 0000:02:00.0: TI: mfunc 0x01d21022, devctl 0x64
[ 3.050672] yenta_cardbus 0000:02:00.0: ISA IRQ mask 0x04f8, PCI irq 11
[ 3.050678] yenta_cardbus 0000:02:00.0: Socket status: 30000006
[ 3.050689] yenta_cardbus 0000:02:00.0: pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff
[ 3.050695] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x4000-0x8fff: clean.
[ 3.052383] yenta_cardbus 0000:02:00.0: pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xdfffffff
[ 3.052390] yenta_cardbus 0000:02:00.0: pcmcia: parent PCI bridge Memory window: 0xf0000000 - 0xf7ffffff
[ 3.052512] device: 'pcmcia_socket0': device_add
[ 3.052531] PM: Adding info for No Bus:pcmcia_socket0
[ 3.052618] driver: '0000:02:00.0': driver_bound: bound to device 'yenta_cardbus'
[ 3.052624] bus: 'pci': really_probe: bound device 0000:02:00.0 to driver yenta_cardbus
[ 3.052631] bus: 'pci': driver_probe_device: matched device 0000:02:00.1 with driver yenta_cardbus
[ 3.052636] bus: 'pci': really_probe: probing driver yenta_cardbus with device 0000:02:00.1
[ 3.052655] yenta_cardbus 0000:02:00.1: CardBus bridge found [1014:0512]
[ 3.052675] yenta_cardbus 0000:02:00.1: Using INTVAL to route CSC interrupts to PCI
[ 3.052679] yenta_cardbus 0000:02:00.1: Routing CardBus interrupts to PCI
[ 3.052687] yenta_cardbus 0000:02:00.1: TI: mfunc 0x01d21022, devctl 0x64
[ 3.275672] yenta_cardbus 0000:02:00.1: ISA IRQ mask 0x04f8, PCI irq 11
[ 3.275678] yenta_cardbus 0000:02:00.1: Socket status: 30000020
[ 3.275685] yenta_cardbus 0000:02:00.1: pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff
[ 3.275691] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x4000-0x8fff: clean.
[ 3.277318] yenta_cardbus 0000:02:00.1: pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xdfffffff
[ 3.277324] yenta_cardbus 0000:02:00.1: pcmcia: parent PCI bridge Memory window: 0xf0000000 - 0xf7ffffff
[ 3.277427] device: 'pcmcia_socket1': device_add
[ 3.277449] PM: Adding info for No Bus:pcmcia_socket1
[ 3.277528] driver: '0000:02:00.1': driver_bound: bound to device 'yenta_cardbus'
[ 3.277534] bus: 'pci': really_probe: bound device 0000:02:00.1 to driver yenta_cardbus
[ 3.277606] bus: 'pnp': add driver i8042 kbd
[ 3.277621] bus: 'pnp': driver_probe_device: matched device 00:07 with driver i8042 kbd
[ 3.277626] bus: 'pnp': really_probe: probing driver i8042 kbd with device 00:07
[ 3.277637] driver: '00:07': driver_bound: bound to device 'i8042 kbd'
[ 3.277641] bus: 'pnp': really_probe: bound device 00:07 to driver i8042 kbd
[ 3.277693] bus: 'pnp': add driver i8042 aux
[ 3.277714] bus: 'pnp': driver_probe_device: matched device 00:08 with driver i8042 aux
[ 3.277719] bus: 'pnp': really_probe: probing driver i8042 aux with device 00:08
[ 3.277729] driver: '00:08': driver_bound: bound to device 'i8042 aux'
[ 3.277734] bus: 'pnp': really_probe: bound device 00:08 to driver i8042 aux
[ 3.277787] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 3.277822] Registering platform device 'i8042'. Parent at platform
[ 3.277827] device: 'i8042': device_add
[ 3.277837] bus: 'platform': add device i8042
[ 3.277850] PM: Adding info for platform:i8042
[ 3.277899] bus: 'platform': add driver i8042
[ 3.277911] bus: 'platform': driver_probe_device: matched device i8042 with driver i8042
[ 3.277916] bus: 'platform': really_probe: probing driver i8042 with device i8042
[ 3.283556] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.283565] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.283571] driver: 'i8042': driver_bound: bound to device 'i8042'
[ 3.283575] bus: 'platform': really_probe: bound device i8042 to driver i8042
[ 3.283594] device: 'serio0': device_add
[ 3.283601] bus: 'serio': add device serio0
[ 3.283613] PM: Adding info for serio:serio0
[ 3.283682] device: 'mice': device_add
[ 3.283729] PM: Adding info for No Bus:mice
[ 3.283788] device: 'serio1': device_add
[ 3.283795] bus: 'serio': add device serio1
[ 3.283806] PM: Adding info for serio:serio1
[ 3.283859] device: 'psaux': device_add
[ 3.283880] PM: Adding info for No Bus:psaux
[ 3.283952] mice: PS/2 mouse device common for all mice
[ 3.283964] bus: 'serio': add driver atkbd
[ 3.284059] bus: 'serio': driver_probe_device: matched device serio0 with driver atkbd
[ 3.284065] bus: 'serio': really_probe: probing driver atkbd with device serio0
[ 3.284103] bus: 'serio': add driver psmouse
[ 3.284166] Driver 'rtc_cmos' needs updating - please use bus_type methods
[ 3.284171] bus: 'pnp': add driver rtc_cmos
[ 3.284184] bus: 'pnp': driver_probe_device: matched device 00:06 with driver rtc_cmos
[ 3.284189] bus: 'pnp': really_probe: probing driver rtc_cmos with device 00:06
[ 3.284213] rtc_cmos 00:06: RTC can wake from S4
[ 3.284225] device: 'rtc0': device_add
[ 3.284257] PM: Adding info for No Bus:rtc0
[ 3.284325] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 3.284351] rtc0: alarms up to one month, y3k, 114 bytes nvram
[ 3.284356] driver: '00:06': driver_bound: bound to device 'rtc_cmos'
[ 3.284360] bus: 'pnp': really_probe: bound device 00:06 to driver rtc_cmos
[ 3.284415] bus: 'pci': add driver i801_smbus
[ 3.284430] bus: 'pci': driver_probe_device: matched device 0000:00:1f.3 with driver i801_smbus
[ 3.284435] bus: 'pci': really_probe: probing driver i801_smbus with device 0000:00:1f.3
[ 3.284460] i801_smbus 0000:00:1f.3: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 3.284496] device: 'i2c-0': device_add
[ 3.284507] bus: 'i2c': add device i2c-0
[ 3.284515] PM: Adding info for i2c:i2c-0
[ 3.284573] driver: '0000:00:1f.3': driver_bound: bound to device 'i801_smbus'
[ 3.284579] bus: 'pci': really_probe: bound device 0000:00:1f.3 to driver i801_smbus
[ 3.284637] Linux video capture interface: v2.00
[ 3.284643] device class 'video4linux': registering
[ 3.284732] cpuidle: using governor ladder
[ 3.284736] cpuidle: using governor menu
[ 3.284743] device class 'sound': registering
[ 3.284823] Advanced Linux Sound Architecture Driver Version 1.0.21.
[ 3.284834] device: 'timer': device_add
[ 3.284867] PM: Adding info for No Bus:timer
[ 3.284951] bus: 'pci': add driver Intel ICH
[ 3.284965] bus: 'pci': driver_probe_device: matched device 0000:00:1f.5 with driver Intel ICH
[ 3.284970] bus: 'pci': really_probe: probing driver Intel ICH with device 0000:00:1f.5
[ 3.284996] Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 3.285056] Intel ICH 0000:00:1f.5: setting latency timer to 64
[ 3.286713] device: 'input0': device_add
[ 3.286746] PM: Adding info for No Bus:input0
[ 3.286871] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 3.286885] device: 'event0': device_add
[ 3.286911] PM: Adding info for No Bus:event0
[ 3.286961] driver: 'serio0': driver_bound: bound to device 'atkbd'
[ 3.286967] bus: 'serio': really_probe: bound device serio0 to driver atkbd
[ 3.286973] bus: 'serio': driver_probe_device: matched device serio1 with driver atkbd
[ 3.286978] bus: 'serio': really_probe: probing driver atkbd with device serio1
[ 3.292326] bus: 'serio': driver_probe_device: matched device serio1 with driver psmouse
[ 3.292331] bus: 'serio': really_probe: probing driver psmouse with device serio1
[ 3.696020] intel8x0_measure_ac97_clock: measured 50091 usecs (2408 samples)
[ 3.696025] intel8x0: clocking to 48000
[ 3.696033] device: 'card0': device_add
[ 3.696053] PM: Adding info for No Bus:card0
[ 3.696146] device: 'pcmC0D1c': device_add
[ 3.696180] PM: Adding info for No Bus:pcmC0D1c
[ 3.696241] device: 'pcmC0D0p': device_add
[ 3.696262] PM: Adding info for No Bus:pcmC0D0p
[ 3.696321] device: 'pcmC0D0c': device_add
[ 3.696340] PM: Adding info for No Bus:pcmC0D0c
[ 3.696400] device: '0-0:AD1881A': device_add
[ 3.696408] bus: 'ac97': add device 0-0:AD1881A
[ 3.696417] PM: Adding info for ac97:0-0:AD1881A
[ 3.696466] device: 'controlC0': device_add
[ 3.696485] PM: Adding info for No Bus:controlC0
[ 3.696549] driver: '0000:00:1f.5': driver_bound: bound to device 'Intel ICH'
[ 3.696555] bus: 'pci': really_probe: bound device 0000:00:1f.5 to driver Intel ICH
[ 3.696627] ALSA device list:
[ 3.696631] #0: Intel 82801CA-ICH3 with AD1881A at irq 11
[ 3.697325] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 3.697347] arp_tables: (C) 2002 David S. Miller
[ 3.697370] TCP cubic registered
[ 3.697373] TCP westwood registered
[ 3.697422] NET: Registered protocol family 10
[ 3.698201] lo: Disabled Privacy Extensions
[ 3.699310] Mobile IPv6
[ 3.699326] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 3.699342] NET: Registered protocol family 17
[ 3.699373] Using IPI Shortcut mode
[ 3.699396] device: 'cpu_dma_latency': device_add
[ 3.699437] PM: Adding info for No Bus:cpu_dma_latency
[ 3.699534] device: 'network_latency': device_add
[ 3.699553] PM: Adding info for No Bus:network_latency
[ 3.699605] device: 'network_throughput': device_add
[ 3.699624] PM: Adding info for No Bus:network_throughput
[ 3.699901] registered taskstats version 1
[ 3.700248] rtc_cmos 00:06: setting system clock to 2009-11-23 09:36:35 UTC (1258968995)
[ 3.700323] Freeing unused kernel memory: 444k freed
[ 3.701062] Write protecting the kernel text: 2988k
[ 3.701101] Write protecting the kernel read-only data: 1132k
[ 3.811915] bus: 'acpi': add driver fan
[ 3.817607] bus: 'acpi': add driver thermal
[ 3.817653] bus: 'acpi': driver_probe_device: matched device LNXTHERM:00 with driver thermal
[ 3.817659] bus: 'acpi': really_probe: probing driver thermal with device LNXTHERM:00
[ 3.817688] bus: 'acpi': driver_probe_device: matched device LNXTHERM:01 with driver thermal
[ 3.817694] bus: 'acpi': really_probe: probing driver thermal with device LNXTHERM:01
[ 3.818465] device: 'thermal_zone0': device_add
[ 3.818490] PM: Adding info for No Bus:thermal_zone0
[ 3.818591] device: 'hwmon0': device_add
[ 3.818605] PM: Adding info for No Bus:hwmon0
[ 3.819139] thermal LNXTHERM:01: registered as thermal_zone0
[ 3.819154] ACPI: Thermal Zone [THM0] (54 C)
[ 3.819162] driver: 'LNXTHERM:01': driver_bound: bound to device 'thermal'
[ 3.819167] bus: 'acpi': really_probe: bound device LNXTHERM:01 to driver thermal
[ 3.915757] pcmcia_socket pcmcia_socket1: pccard: CardBus card inserted into slot 1
[ 3.915813] pci 0000:07:00.0: reg 10 32bit mmio: [0x000000-0x00ffff]
[ 3.915918] device: '0000:07:00.0': device_add
[ 3.915943] bus: 'pci': add device 0000:07:00.0
[ 3.915974] PM: Adding info for pci:0000:07:00.0
[ 3.963982] device: 'eth0': device_rename: renaming to 'eth1'
[ 3.990411] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x2c6ab1, caps: 0x884793/0x0
[ 3.990422] serio: Synaptics pass-through port at isa0060/serio1/input0
[ 4.044064] device: 'input1': device_add
[ 4.044123] PM: Adding info for No Bus:input1
[ 4.044211] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input1
[ 4.044227] device: 'mouse0': device_add
[ 4.044274] PM: Adding info for No Bus:mouse0
[ 4.044296] device: 'event1': device_add
[ 4.044315] PM: Adding info for No Bus:event1
[ 4.048119] driver: 'serio1': driver_bound: bound to device 'psmouse'
[ 4.048129] bus: 'serio': really_probe: bound device serio1 to driver psmouse
[ 4.048141] device: 'serio2': device_add
[ 4.048161] bus: 'serio': add device serio2
[ 4.048177] PM: Adding info for serio:serio2
[ 4.048208] bus: 'serio': driver_probe_device: matched device serio2 with driver psmouse
[ 4.048213] bus: 'serio': really_probe: probing driver psmouse with device serio2
[ 4.261856] bus: 'usb': registered
[ 4.261869] bus: 'usb': add driver usbfs
[ 4.261898] usbcore: registered new interface driver usbfs
[ 4.261906] device class 'usb_device': registering
[ 4.261953] bus: 'usb': add driver hub
[ 4.261975] usbcore: registered new interface driver hub
[ 4.262682] bus: 'usb': add driver usb
[ 4.262719] usbcore: registered new device driver usb
[ 4.272725] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.272737] bus: 'pci': add driver ehci_hcd
[ 4.281333] uhci_hcd: USB Universal Host Controller Interface driver
[ 4.281385] bus: 'pci': add driver uhci_hcd
[ 4.281402] bus: 'pci': driver_probe_device: matched device 0000:00:1d.0 with driver uhci_hcd
[ 4.281408] bus: 'pci': really_probe: probing driver uhci_hcd with device 0000:00:1d.0
[ 4.283484] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 4.283505] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 4.283523] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 4.283529] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 4.283581] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 4.283621] uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001800
[ 4.283696] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.283701] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.283706] usb usb1: Product: UHCI Host Controller
[ 4.283710] usb usb1: Manufacturer: Linux 2.6.32-rc8 uhci_hcd
[ 4.283714] usb usb1: SerialNumber: 0000:00:1d.0
[ 4.283719] device: 'usb1': device_add
[ 4.283793] bus: 'usb': add device usb1
[ 4.283804] PM: Adding info for usb:usb1
[ 4.283858] bus: 'usb': driver_probe_device: matched device usb1 with driver usb
[ 4.283863] bus: 'usb': really_probe: probing driver usb with device usb1
[ 4.283874] usb usb1: configuration #1 chosen from 1 choice
[ 4.283886] device: '1-0:1.0': device_add
[ 4.283901] bus: 'usb': add device 1-0:1.0
[ 4.283911] PM: Adding info for usb:1-0:1.0
[ 4.283937] bus: 'usb': driver_probe_device: matched device 1-0:1.0 with driver hub
[ 4.283942] bus: 'usb': really_probe: probing driver hub with device 1-0:1.0
[ 4.283951] hub 1-0:1.0: USB hub found
[ 4.283968] hub 1-0:1.0: 2 ports detected
[ 4.283982] driver: '1-0:1.0': driver_bound: bound to device 'hub'
[ 4.283987] bus: 'usb': really_probe: bound device 1-0:1.0 to driver hub
[ 4.283996] device: 'ep_81': device_add
[ 4.284058] PM: Adding info for No Bus:ep_81
[ 4.284068] device: 'usbdev1.1': device_add
[ 4.284085] PM: Adding info for No Bus:usbdev1.1
[ 4.284109] driver: 'usb1': driver_bound: bound to device 'usb'
[ 4.284114] bus: 'usb': really_probe: bound device usb1 to driver usb
[ 4.284121] device: 'ep_00': device_add
[ 4.284142] PM: Adding info for No Bus:ep_00
[ 4.284159] driver: '0000:00:1d.0': driver_bound: bound to device 'uhci_hcd'
[ 4.284165] bus: 'pci': really_probe: bound device 0000:00:1d.0 to driver uhci_hcd
[ 4.284172] bus: 'pci': driver_probe_device: matched device 0000:00:1d.1 with driver uhci_hcd
[ 4.284177] bus: 'pci': really_probe: probing driver uhci_hcd with device 0000:00:1d.1
[ 4.285164] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[ 4.285653] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 4.285662] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 4.285678] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 4.285684] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 4.285716] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 4.285755] uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001820
[ 4.285818] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.285824] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.285829] usb usb2: Product: UHCI Host Controller
[ 4.285834] usb usb2: Manufacturer: Linux 2.6.32-rc8 uhci_hcd
[ 4.285838] usb usb2: SerialNumber: 0000:00:1d.1
[ 4.285843] device: 'usb2': device_add
[ 4.285910] bus: 'usb': add device usb2
[ 4.285921] PM: Adding info for usb:usb2
[ 4.285971] bus: 'usb': driver_probe_device: matched device usb2 with driver usb
[ 4.285976] bus: 'usb': really_probe: probing driver usb with device usb2
[ 4.285987] usb usb2: configuration #1 chosen from 1 choice
[ 4.286000] device: '2-0:1.0': device_add
[ 4.286037] bus: 'usb': add device 2-0:1.0
[ 4.286048] PM: Adding info for usb:2-0:1.0
[ 4.286073] bus: 'usb': driver_probe_device: matched device 2-0:1.0 with driver hub
[ 4.286078] bus: 'usb': really_probe: probing driver hub with device 2-0:1.0
[ 4.286087] hub 2-0:1.0: USB hub found
[ 4.286100] hub 2-0:1.0: 2 ports detected
[ 4.286113] driver: '2-0:1.0': driver_bound: bound to device 'hub'
[ 4.286118] bus: 'usb': really_probe: bound device 2-0:1.0 to driver hub
[ 4.286126] device: 'ep_81': device_add
[ 4.286145] PM: Adding info for No Bus:ep_81
[ 4.286153] device: 'usbdev2.1': device_add
[ 4.286170] PM: Adding info for No Bus:usbdev2.1
[ 4.286192] driver: 'usb2': driver_bound: bound to device 'usb'
[ 4.286197] bus: 'usb': really_probe: bound device usb2 to driver usb
[ 4.286204] device: 'ep_00': device_add
[ 4.286220] PM: Adding info for No Bus:ep_00
[ 4.286234] driver: '0000:00:1d.1': driver_bound: bound to device 'uhci_hcd'
[ 4.286241] bus: 'pci': really_probe: bound device 0000:00:1d.1 to driver uhci_hcd
[ 4.286248] bus: 'pci': driver_probe_device: matched device 0000:00:1d.2 with driver uhci_hcd
[ 4.286252] bus: 'pci': really_probe: probing driver uhci_hcd with device 0000:00:1d.2
[ 4.286273] uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 4.286285] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 4.286290] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 4.286306] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 4.286339] uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001840
[ 4.286387] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.286393] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.286398] usb usb3: Product: UHCI Host Controller
[ 4.286402] usb usb3: Manufacturer: Linux 2.6.32-rc8 uhci_hcd
[ 4.286405] usb usb3: SerialNumber: 0000:00:1d.2
[ 4.286409] device: 'usb3': device_add
[ 4.286456] bus: 'usb': add device usb3
[ 4.286465] PM: Adding info for usb:usb3
[ 4.286502] bus: 'usb': driver_probe_device: matched device usb3 with driver usb
[ 4.286507] bus: 'usb': really_probe: probing driver usb with device usb3
[ 4.286516] usb usb3: configuration #1 chosen from 1 choice
[ 4.286526] device: '3-0:1.0': device_add
[ 4.286545] bus: 'usb': add device 3-0:1.0
[ 4.286553] PM: Adding info for usb:3-0:1.0
[ 4.286577] bus: 'usb': driver_probe_device: matched device 3-0:1.0 with driver hub
[ 4.286582] bus: 'usb': really_probe: probing driver hub with device 3-0:1.0
[ 4.286589] hub 3-0:1.0: USB hub found
[ 4.286601] hub 3-0:1.0: 2 ports detected
[ 4.286611] driver: '3-0:1.0': driver_bound: bound to device 'hub'
[ 4.286615] bus: 'usb': really_probe: bound device 3-0:1.0 to driver hub
[ 4.286622] device: 'ep_81': device_add
[ 4.286638] PM: Adding info for No Bus:ep_81
[ 4.286645] device: 'usbdev3.1': device_add
[ 4.286662] PM: Adding info for No Bus:usbdev3.1
[ 4.286683] driver: 'usb3': driver_bound: bound to device 'usb'
[ 4.286688] bus: 'usb': really_probe: bound device usb3 to driver usb
[ 4.286696] device: 'ep_00': device_add
[ 4.286712] PM: Adding info for No Bus:ep_00
[ 4.286726] driver: '0000:00:1d.2': driver_bound: bound to device 'uhci_hcd'
[ 4.286731] bus: 'pci': really_probe: bound device 0000:00:1d.2 to driver uhci_hcd
[ 9.260996] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 9.472453] device: 'input2': device_add
[ 9.472509] PM: Adding info for No Bus:input2
[ 9.472595] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input2
[ 9.472611] device: 'mouse1': device_add
[ 9.472665] PM: Adding info for No Bus:mouse1
[ 9.472690] device: 'event2': device_add
[ 9.472710] PM: Adding info for No Bus:event2
[ 9.545798] driver: 'serio2': driver_bound: bound to device 'psmouse'
[ 9.545808] bus: 'serio': really_probe: bound device serio2 to driver psmouse
[ 9.575237] PM: Starting manual resume from disk
[ 9.649368] kjournald starting. Commit interval 5 seconds
[ 9.649386] EXT3-fs: mounted filesystem with ordered data mode.
[ 13.678339] udev: starting version 147
[ 14.460025] bus: 'acpi': add driver button
[ 14.460051] bus: 'acpi': driver_probe_device: matched device PNP0C0D:00 with driver button
[ 14.460058] bus: 'acpi': really_probe: probing driver button with device PNP0C0D:00
[ 14.460081] device: 'input3': device_add
[ 14.460125] PM: Adding info for No Bus:input3
[ 14.460194] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
[ 14.460208] device: 'event3': device_add
[ 14.460256] PM: Adding info for No Bus:event3
[ 14.463189] device class 'video_output': registering
[ 14.465940] ACPI: Lid Switch [LID]
[ 14.465955] driver: 'PNP0C0D:00': driver_bound: bound to device 'button'
[ 14.465961] bus: 'acpi': really_probe: bound device PNP0C0D:00 to driver button
[ 14.465970] bus: 'acpi': driver_probe_device: matched device PNP0C0E:00 with driver button
[ 14.465975] bus: 'acpi': really_probe: probing driver button with device PNP0C0E:00
[ 14.466043] device: 'input4': device_add
[ 14.466090] PM: Adding info for No Bus:input4
[ 14.466168] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4
[ 14.466183] device: 'event4': device_add
[ 14.466233] PM: Adding info for No Bus:event4
[ 14.466255] ACPI: Sleep Button [SLPB]
[ 14.466263] driver: 'PNP0C0E:00': driver_bound: bound to device 'button'
[ 14.466267] bus: 'acpi': really_probe: bound device PNP0C0E:00 to driver button
[ 14.466302] bus: 'acpi': driver_probe_device: matched device LNXPWRBN:00 with driver button
[ 14.466307] bus: 'acpi': really_probe: probing driver button with device LNXPWRBN:00
[ 14.466326] device: 'input5': device_add
[ 14.466360] PM: Adding info for No Bus:input5
[ 14.466422] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 14.466432] device: 'event5': device_add
[ 14.466454] PM: Adding info for No Bus:event5
[ 14.466471] ACPI: Power Button [PWRF]
[ 14.466481] driver: 'LNXPWRBN:00': driver_bound: bound to device 'button'
[ 14.466485] bus: 'acpi': really_probe: bound device LNXPWRBN:00 to driver button
[ 14.955211] bus: 'pci': add driver Intel ICH Modem
[ 14.955234] bus: 'pci': driver_probe_device: matched device 0000:00:1f.6 with driver Intel ICH Modem
[ 14.955240] bus: 'pci': really_probe: probing driver Intel ICH Modem with device 0000:00:1f.6
[ 14.955284] Intel ICH Modem 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 14.955311] Intel ICH Modem 0000:00:1f.6: setting latency timer to 64
[ 14.963390] device: 'card1': device_add
[ 14.963429] PM: Adding info for No Bus:card1
[ 14.963470] device: 'pcmC1D0p': device_add
[ 14.963522] PM: Adding info for No Bus:pcmC1D0p
[ 14.963553] device: 'pcmC1D0c': device_add
[ 14.963576] PM: Adding info for No Bus:pcmC1D0c
[ 14.963602] device: '1-1:Si3036,8': device_add
[ 14.963611] bus: 'ac97': add device 1-1:Si3036,8
[ 14.963621] PM: Adding info for ac97:1-1:Si3036,8
[ 14.963639] device: 'controlC1': device_add
[ 14.963659] PM: Adding info for No Bus:controlC1
[ 14.963690] driver: '0000:00:1f.6': driver_bound: bound to device 'Intel ICH Modem'
[ 14.963698] bus: 'pci': really_probe: bound device 0000:00:1f.6 to driver Intel ICH Modem
[ 15.506356] bus: 'acpi': add driver battery
[ 15.506400] bus: 'acpi': driver_probe_device: matched device PNP0C0A:00 with driver battery
[ 15.506406] bus: 'acpi': really_probe: probing driver battery with device PNP0C0A:00
[ 15.513568] ACPI Warning for \_SB_.PCI0.LPC_.EC__.BAT0._BIF: Converted Buffer to expected String at index 9 (20090903/nsrepair-132)
[ 15.513580] ACPI Warning for \_SB_.PCI0.LPC_.EC__.BAT0._BIF: Converted Buffer to expected String at index 10 (20090903/nsrepair-132)
[ 15.513590] ACPI Warning for \_SB_.PCI0.LPC_.EC__.BAT0._BIF: Converted Buffer to expected String at index 11 (20090903/nsrepair-132)
[ 15.513600] ACPI Warning for \_SB_.PCI0.LPC_.EC__.BAT0._BIF: Converted Buffer to expected String at index 12 (20090903/nsrepair-132)
[ 15.514604] device: 'BAT0': device_add
[ 15.514632] PM: Adding info for No Bus:BAT0
[ 15.516187] ACPI: Battery Slot [BAT0] (battery present)
[ 15.516197] driver: 'PNP0C0A:00': driver_bound: bound to device 'battery'
[ 15.516203] bus: 'acpi': really_probe: bound device PNP0C0A:00 to driver battery
[ 16.415760] bus: 'acpi': add driver processor
[ 16.415779] bus: 'acpi': driver_probe_device: matched device LNXCPU:00 with driver processor
[ 16.415785] bus: 'acpi': really_probe: probing driver processor with device LNXCPU:00
[ 16.415850] Marking TSC unstable due to TSC halts in idle
[ 16.415962] device: 'cooling_device0': device_add
[ 16.415981] PM: Adding info for No Bus:cooling_device0
[ 16.416031] processor LNXCPU:00: registered as cooling_device0
[ 16.416041] driver: 'LNXCPU:00': driver_bound: bound to device 'processor'
[ 16.416046] bus: 'acpi': really_probe: bound device LNXCPU:00 to driver processor
[ 16.418353] bus: 'acpi': add driver ac
[ 16.418388] bus: 'acpi': driver_probe_device: matched device ACPI0003:00 with driver ac
[ 16.418394] bus: 'acpi': really_probe: probing driver ac with device ACPI0003:00
[ 16.425317] device: 'AC': device_add
[ 16.425353] PM: Adding info for No Bus:AC
[ 16.425401] ACPI: AC Adapter [AC] (on-line)
[ 16.425411] driver: 'ACPI0003:00': driver_bound: bound to device 'ac'
[ 16.425416] bus: 'acpi': really_probe: bound device ACPI0003:00 to driver ac
[ 16.426065] Switching to clocksource acpi_pm
[ 16.935582] device class 'ieee80211': registering
[ 16.935673] Registering platform device 'regulatory.0'. Parent at platform
[ 16.935679] device: 'regulatory.0': device_add
[ 16.935694] bus: 'platform': add device regulatory.0
[ 16.935708] PM: Adding info for platform:regulatory.0
[ 16.935727] cfg80211: Using static regulatory domain info
[ 16.935731] cfg80211: Regulatory domain: US
[ 16.935734] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 16.935740] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 16.935745] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 16.935750] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 16.935756] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 16.935761] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 16.935766] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 16.936499] cfg80211: Calling CRDA for country: US
[ 17.087765] bus: 'acpi': add driver video
[ 17.087802] bus: 'acpi': driver_probe_device: matched device LNXVIDEO:00 with driver video
[ 17.087808] bus: 'acpi': really_probe: probing driver video with device LNXVIDEO:00
[ 17.090537] device: 'acpi_video0': device_add
[ 17.090577] PM: Adding info for No Bus:acpi_video0
[ 17.090633] device: 'acpi_video1': device_add
[ 17.090650] PM: Adding info for No Bus:acpi_video1
[ 17.090686] device: 'acpi_video2': device_add
[ 17.090699] PM: Adding info for No Bus:acpi_video2
[ 17.090734] device: 'acpi_video3': device_add
[ 17.090747] PM: Adding info for No Bus:acpi_video3
[ 17.092218] device: 'input6': device_add
[ 17.092278] PM: Adding info for No Bus:input6
[ 17.092363] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:01/LNXVIDEO:00/input/input6
[ 17.092382] device: 'event6': device_add
[ 17.092435] PM: Adding info for No Bus:event6
[ 17.092455] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 17.092465] driver: 'LNXVIDEO:00': driver_bound: bound to device 'video'
[ 17.092471] bus: 'acpi': really_probe: bound device LNXVIDEO:00 to driver video
[ 17.671231] NET: Registered protocol family 23
[ 17.820611] bus: 'pcmcia': registered
[ 17.979444] bus: 'platform': add driver nsc-ircc
[ 17.979479] bus: 'pnp': add driver nsc-ircc
[ 17.979499] bus: 'pnp': driver_probe_device: matched device 00:0b with driver nsc-ircc
[ 17.979504] bus: 'pnp': really_probe: probing driver nsc-ircc with device 00:0b
[ 17.983853] nsc-ircc 00:0b: activated
[ 17.983864] driver: '00:0b': driver_bound: bound to device 'nsc-ircc'
[ 17.983871] bus: 'pnp': really_probe: bound device 00:0b to driver nsc-ircc
[ 17.984094] nsc-ircc, chip->init
[ 17.984107] nsc-ircc, Found chip at base=0x02e
[ 17.984135] nsc-ircc, driver loaded (Dag Brattli)
[ 17.984199] device: 'irda0': device_add
[ 17.984269] PM: Adding info for No Bus:irda0
[ 17.985289] IrDA: Registered device irda0
[ 17.985294] nsc-ircc, Using dongle: IBM31T1100 or Temic TFDS6000/TFDS6500
[ 17.985309] Registering platform device 'nsc-ircc.0'. Parent at platform
[ 17.985314] device: 'nsc-ircc.0': device_add
[ 17.985330] bus: 'platform': add device nsc-ircc.0
[ 17.985344] PM: Adding info for platform:nsc-ircc.0
[ 17.985363] bus: 'platform': driver_probe_device: matched device nsc-ircc.0 with driver nsc-ircc
[ 17.985368] bus: 'platform': really_probe: probing driver nsc-ircc with device nsc-ircc.0
[ 17.985377] driver: 'nsc-ircc.0': driver_bound: bound to device 'nsc-ircc'
[ 17.985381] bus: 'platform': really_probe: bound device nsc-ircc.0 to driver nsc-ircc
[ 18.005479] intel_rng: FWH not detected
[ 18.050223] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
[ 18.051567] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 18.052141] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[ 18.052619] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[ 18.053327] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 19.111330] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af: clean.
[ 19.112642] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 19.114860] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff: clean.
[ 19.115392] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7: clean.
[ 19.116122] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean.
[ 19.510403] bus: 'pci': add driver ath5k
[ 19.510429] bus: 'pci': driver_probe_device: matched device 0000:07:00.0 with driver ath5k
[ 19.510435] bus: 'pci': really_probe: probing driver ath5k with device 0000:07:00.0
[ 19.510462] ath5k 0000:07:00.0: enabling device (0000 -> 0002)
[ 19.510482] ath5k 0000:07:00.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 19.510566] ath5k 0000:07:00.0: registered as 'phy0'
[ 19.620368] ath: EEPROM regdomain: 0x80d0
[ 19.620372] ath: EEPROM indicates we should expect a country code
[ 19.620377] ath: doing EEPROM country->regdmn map search
[ 19.620380] ath: country maps to regdmn code: 0x37
[ 19.620384] ath: Country alpha2 being used: DK
[ 19.620387] ath: Regpair used: 0x37
[ 19.620399] device: 'phy0': device_add
[ 19.620426] PM: Adding info for No Bus:phy0
[ 19.694402] phy0: Selected rate control algorithm 'minstrel'
[ 19.694431] device: 'wlan0': device_add
[ 19.694517] PM: Adding info for No Bus:wlan0
[ 19.695662] ath5k phy0: Atheros AR2414 chip found (MAC: 0x79, PHY: 0x45)
[ 19.695669] driver: '0000:07:00.0': driver_bound: bound to device 'ath5k'
[ 19.695676] bus: 'pci': really_probe: bound device 0000:07:00.0 to driver ath5k
[ 19.696169] cfg80211: Calling CRDA for country: DK
[ 19.709881] device: 'wlan0': device_rename: renaming to 'wlan1'
[ 19.711143] udev: renamed network interface wlan0 to wlan1
[ 20.988337] device: 'vcs2': device_add
[ 20.988407] PM: Adding info for No Bus:vcs2
[ 20.988445] device: 'vcsa2': device_add
[ 20.988466] PM: Adding info for No Bus:vcsa2
[ 20.991706] device: 'vcs3': device_add
[ 20.991776] PM: Adding info for No Bus:vcs3
[ 20.991818] device: 'vcsa3': device_add
[ 20.991839] PM: Adding info for No Bus:vcsa3
[ 20.994949] device: 'vcs4': device_add
[ 20.995080] PM: Adding info for No Bus:vcs4
[ 20.995117] device: 'vcsa4': device_add
[ 20.995137] PM: Adding info for No Bus:vcsa4
[ 20.998262] device: 'vcs5': device_add
[ 20.998341] PM: Adding info for No Bus:vcs5
[ 20.998378] device: 'vcsa5': device_add
[ 20.998398] PM: Adding info for No Bus:vcsa5
[ 21.001453] device: 'vcs6': device_add
[ 21.001525] PM: Adding info for No Bus:vcs6
[ 21.001564] device: 'vcsa6': device_add
[ 21.001585] PM: Adding info for No Bus:vcsa6
[ 23.448161] Adding 1646620k swap on /dev/hda5. Priority:-1 extents:1 across:1646620k
[ 23.802466] EXT3 FS on hda1, internal journal
[ 25.041156] bus: 'usb': add driver uvcvideo
[ 25.041199] usbcore: registered new interface driver uvcvideo
[ 25.041204] USB Video Class driver (v0.1.0)
[ 25.150785] device: 'mixer': device_add
[ 25.150856] PM: Adding info for No Bus:mixer
[ 25.151544] device: 'mixer1': device_add
[ 25.151569] PM: Adding info for No Bus:mixer1
[ 25.718907] device class 'drm': registering
[ 25.718977] [drm] Initialized drm 1.1.0 20060810
[ 26.011632] device: 'ttm': device_add
[ 26.011661] PM: Adding info for No Bus:ttm
[ 27.181189] pci 0000:01:00.0: power state changed by ACPI to D0
[ 27.181210] pci 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 27.181544] device: 'card0': device_add
[ 27.181615] PM: Adding info for No Bus:card0
[ 27.181687] [drm] Initialized radeon 1.31.0 20080528 for 0000:01:00.0 on minor 0
[ 56.809894] Bluetooth: Core ver 2.15
[ 56.815362] device class 'bluetooth': registering
[ 56.815419] NET: Registered protocol family 31
[ 56.815425] Bluetooth: HCI device and connection manager initialized
[ 56.815432] Bluetooth: HCI socket layer initialized
[ 56.856961] Bluetooth: L2CAP ver 2.14
[ 56.856968] Bluetooth: L2CAP socket layer initialized
[ 57.185780] Bluetooth: RFCOMM TTY layer initialized
[ 57.185794] Bluetooth: RFCOMM socket layer initialized
[ 57.185801] Bluetooth: RFCOMM ver 1.11
[ 57.373446] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 57.373455] Bluetooth: BNEP filters: protocol multicast
[ 57.958208] Bridge firewalling registered
[ 57.973217] device: 'pan0': device_add
[ 57.973333] PM: Adding info for No Bus:pan0
[ 58.145266] Bluetooth: SCO (Voice Link) ver 0.6
[ 58.145273] Bluetooth: SCO socket layer initialized
[ 61.908302] CPUFREQ: Per core ondemand sysfs interface is deprecated - up_threshold
[ 61.912881] CPUFREQ: Per core ondemand sysfs interface is deprecated - ignore_nice_load
[ 66.471687] device: 'vcs7': device_add
[ 66.471776] PM: Adding info for No Bus:vcs7
[ 66.471820] device: 'vcsa7': device_add
[ 66.471854] PM: Adding info for No Bus:vcsa7
[ 69.507911] agpgart-intel 0000:00:00.0: AGP 2.0 bridge
[ 69.507946] agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode
[ 69.507987] pci 0000:01:00.0: putting AGP V2 device into 4x mode
[ 69.822767] [drm] Setting GART location based on new memory map
[ 69.822790] Registering platform device 'radeon_cp.0'. Parent at platform
[ 69.822800] device: 'radeon_cp.0': device_add
[ 69.822829] bus: 'platform': add device radeon_cp.0
[ 69.822851] PM: Adding info for platform:radeon_cp.0
[ 69.822896] [drm] Loading R100 Microcode
[ 69.822904] platform radeon_cp.0: firmware: requesting radeon/R100_cp.bin
[ 69.822917] device: 'radeon_cp.0': device_add
[ 69.822944] PM: Adding info for No Bus:radeon_cp.0
[ 69.884652] device: 'radeon_cp.0': device_unregister
[ 69.884662] PM: Removing info for No Bus:radeon_cp.0
[ 69.884753] PM: Removing info for platform:radeon_cp.0
[ 69.884780] bus: 'platform': remove device radeon_cp.0
[ 69.884877] [drm] writeback test succeeded in 1 usecs
[ 544.304748] agpgart-intel 0000:00:00.0: AGP 2.0 bridge
[ 544.304785] agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode
[ 544.304826] pci 0000:01:00.0: putting AGP V2 device into 4x mode
[ 594.194849] compiz[4045]: segfault at b6d14350 ip b6d14350 sp bfec987c error 4 in libxcb-glx.so.0.0.0[b6e8b000+10000]
[ 600.683623] gnome-panel[4046]: segfault at 4 ip b6f5407e sp bfe9a080 error 4 in libcairo.so.2.10800.8[b6f44000+75000]
[ 1747.471990] device: 'vcs8': device_add
[ 1747.472119] PM: Adding info for No Bus:vcs8
[ 1747.472172] device: 'vcsa8': device_add
[ 1747.472208] PM: Adding info for No Bus:vcsa8
[ 1747.506596] Syncing filesystems ... done.
[ 1747.510981] Freezing user space processes ... (elapsed 0.00 seconds) done.
[ 1747.513302] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 1747.513567] PM: Preallocating image memory... done (allocated 114468 pages)
[ 1748.029361] PM: Allocated 457872 kbytes in 0.51 seconds (897.78 MB/s)
[ 1748.029368] Suspending console(s) (use no_console_suspend to debug)
[ 1748.029414] platform dock.0: preparing freeze
[ 1748.029421] platform dock.1: preparing freeze
[ 1748.029427] platform dock.2: preparing freeze
[ 1748.029435] agpgart-intel 0000:00:00.0: preparing freeze
[ 1748.029442] pci 0000:00:01.0: preparing freeze
[ 1748.029449] uhci_hcd 0000:00:1d.0: preparing freeze
[ 1748.029456] uhci_hcd 0000:00:1d.1: preparing freeze
[ 1748.029462] uhci_hcd 0000:00:1d.2: preparing freeze
[ 1748.029468] pci 0000:00:1e.0: preparing freeze
[ 1748.029475] pci 0000:00:1f.0: preparing freeze
[ 1748.029481] PIIX_IDE 0000:00:1f.1: preparing freeze
[ 1748.029488] i801_smbus 0000:00:1f.3: preparing freeze
[ 1748.029495] Intel ICH 0000:00:1f.5: preparing freeze
[ 1748.029502] Intel ICH Modem 0000:00:1f.6: preparing freeze
[ 1748.029508] pci 0000:01:00.0: preparing freeze
[ 1748.029515] yenta_cardbus 0000:02:00.0: preparing freeze
[ 1748.029522] yenta_cardbus 0000:02:00.1: preparing freeze
[ 1748.029529] e100 0000:02:08.0: preparing freeze
[ 1748.029552] platform pcspkr: preparing freeze
[ 1748.029558] platform microcode: preparing freeze
[ 1748.029597] serial8250 serial8250: preparing freeze
[ 1748.029636] i8042 i8042: preparing freeze
[ 1748.029656] ath5k 0000:07:00.0: preparing freeze
[ 1748.029666] usb usb1: preparing type freeze
[ 1748.029675] usb usb2: preparing type freeze
[ 1748.029684] usb usb3: preparing type freeze
[ 1748.029701] platform regulatory.0: preparing freeze
[ 1748.029713] nsc-ircc nsc-ircc.0: preparing freeze
[ 1748.029736] drm card0: legacy class freeze
[ 1748.029744] drm ttm: legacy class freeze
[ 1748.029755] ieee80211 phy0: legacy class freeze
[ 1748.029773] nsc-ircc nsc-ircc.0: freeze
[ 1748.029782] input input6: type freeze
[ 1748.029789] platform regulatory.0: freeze
[ 1748.029796] ac97 1-1:Si3036,8: legacy freeze
[ 1748.029804] input input5: type freeze
[ 1748.029810] input input4: type freeze
[ 1748.029816] input input3: type freeze
[ 1748.029823] input input2: type freeze
[ 1748.029829] usb usb3: type freeze
[ 1748.029837] usb usb2: type freeze
[ 1748.029844] usb usb1: type freeze
[ 1748.029850] psmouse serio2: freeze
[ 1748.029856] input input1: type freeze
[ 1748.029862] ath5k 0000:07:00.0: freeze
[ 1748.029931] ath5k 0000:07:00.0: PCI INT A disabled
[ 1748.040141] ac97 0-0:AD1881A: legacy freeze
[ 1748.040149] input input0: type freeze
[ 1748.040155] i2c i2c-0: legacy freeze
[ 1748.040161] rtc rtc0: legacy class freeze
[ 1748.040187] psmouse serio1: freeze
[ 1748.040193] atkbd serio0: freeze
[ 1748.040198] i8042 i8042: freeze
[ 1748.040207] ide-gd 0.0: legacy freeze
[ 1748.040957] serial8250 serial8250: freeze
[ 1748.040996] platform microcode: freeze
[ 1748.041020] platform pcspkr: freeze
[ 1748.041030] nsc-ircc 00:0b: legacy freeze
[ 1748.041384] nsc-ircc 00:0b: disabled
[ 1748.041498] pnp 00:0a: legacy freeze
[ 1748.041505] serial 00:09: legacy freeze
[ 1748.041867] serial 00:09: disabled
[ 1748.041983] i8042 aux 00:08: legacy freeze
[ 1748.041994] i8042 kbd 00:07: legacy freeze
[ 1748.042020] rtc_cmos 00:06: legacy freeze
[ 1748.042034] pnp 00:05: legacy freeze
[ 1748.042039] pnp 00:04: legacy freeze
[ 1748.042044] pnp 00:03: legacy freeze
[ 1748.042050] system 00:02: legacy freeze
[ 1748.042058] pnp 00:01: legacy freeze
[ 1748.042063] system 00:00: legacy freeze
[ 1748.042075] e100 0000:02:08.0: freeze
[ 1748.042128] e100 0000:02:08.0: PCI INT A disabled
[ 1748.042138] e100 0000:02:08.0: PME# enabled
[ 1748.042153] pci 0000:00:1e.0: wake-up capability enabled by ACPI
[ 1748.053140] yenta_cardbus 0000:02:00.1: freeze
[ 1748.053147] yenta_cardbus 0000:02:00.0: freeze
[ 1748.053153] pci 0000:01:00.0: freeze
[ 1748.053162] pci 0000:01:00.0: PCI INT A disabled
[ 1748.053169] Intel ICH Modem 0000:00:1f.6: freeze
[ 1748.053313] Intel ICH Modem 0000:00:1f.6: PCI INT B disabled
[ 1748.053353] Intel ICH 0000:00:1f.5: freeze
[ 1748.053538] Intel ICH 0000:00:1f.5: PCI INT B disabled
[ 1748.053576] i801_smbus 0000:00:1f.3: freeze
[ 1748.053617] PIIX_IDE 0000:00:1f.1: freeze
[ 1748.053658] PIIX_IDE 0000:00:1f.1: PCI INT A disabled
[ 1748.053666] pci 0000:00:1f.0: freeze
[ 1748.053672] pci 0000:00:1e.0: freeze
[ 1748.053677] uhci_hcd 0000:00:1d.2: freeze
[ 1748.053684] uhci_hcd 0000:00:1d.1: freeze
[ 1748.053690] uhci_hcd 0000:00:1d.0: freeze
[ 1748.053696] pci 0000:00:01.0: freeze
[ 1748.053702] agpgart-intel 0000:00:00.0: freeze
[ 1748.053709] platform dock.2: freeze
[ 1748.053714] platform dock.1: freeze
[ 1748.053720] platform dock.0: freeze
[ 1748.053726] button LNXPWRBN:00: legacy freeze
[ 1748.053733] thermal LNXTHERM:01: legacy freeze
[ 1748.053739] acpi LNXTHERM:00: legacy freeze
[ 1748.053745] acpi device:11: legacy freeze
[ 1748.053750] acpi device:10: legacy freeze
[ 1748.053756] acpi device:0f: legacy freeze
[ 1748.053762] acpi device:0e: legacy freeze
[ 1748.053768] acpi device:0d: legacy freeze
[ 1748.053773] acpi device:0c: legacy freeze
[ 1748.053779] acpi device:0b: legacy freeze
[ 1748.053785] acpi device:0a: legacy freeze
[ 1748.053790] acpi device:09: legacy freeze
[ 1748.053796] acpi device:08: legacy freeze
[ 1748.053802] acpi device:07: legacy freeze
[ 1748.053808] acpi device:06: legacy freeze
[ 1748.053813] acpi device:05: legacy freeze
[ 1748.053819] acpi device:04: legacy freeze
[ 1748.053825] acpi device:03: legacy freeze
[ 1748.053831] acpi device:02: legacy freeze
[ 1748.053837] video LNXVIDEO:00: legacy freeze
[ 1748.053842] acpi device:01: legacy freeze
[ 1748.053848] acpi IBM0068:00: legacy freeze
[ 1748.053855] ac ACPI0003:00: legacy freeze
[ 1748.053861] battery PNP0C0A:00: legacy freeze
[ 1748.053867] power LNXPOWER:00: legacy freeze
[ 1748.053873] ec PNP0C09:00: legacy freeze
[ 1748.053884] acpi IBM0071:00: legacy freeze
[ 1748.053889] acpi PNP0400:00: legacy freeze
[ 1748.053895] acpi PNP0501:00: legacy freeze
[ 1748.053901] acpi IBM0057:00: legacy freeze
[ 1748.053907] acpi PNP0303:00: legacy freeze
[ 1748.053912] acpi PNP0B00:00: legacy freeze
[ 1748.053918] acpi PNP0C04:00: legacy freeze
[ 1748.053924] acpi PNP0800:00: legacy freeze
[ 1748.053930] acpi PNP0200:00: legacy freeze
[ 1748.053935] acpi PNP0100:00: legacy freeze
[ 1748.053941] acpi PNP0000:00: legacy freeze
[ 1748.053947] acpi PNP0C02:00: legacy freeze
[ 1748.053953] acpi device:00: legacy freeze
[ 1748.053958] pci_root PNP0A03:00: legacy freeze
[ 1748.053964] button PNP0C0E:00: legacy freeze
[ 1748.053970] button PNP0C0D:00: legacy freeze
[ 1748.053976] acpi PNP0C01:00: legacy freeze
[ 1748.053982] pci_link PNP0C0F:07: legacy freeze
[ 1748.053988] pci_link PNP0C0F:06: legacy freeze
[ 1748.053994] pci_link PNP0C0F:05: legacy freeze
[ 1748.054000] pci_link PNP0C0F:04: legacy freeze
[ 1748.054021] pci_link PNP0C0F:03: legacy freeze
[ 1748.054027] pci_link PNP0C0F:02: legacy freeze
[ 1748.054033] pci_link PNP0C0F:01: legacy freeze
[ 1748.054039] pci_link PNP0C0F:00: legacy freeze
[ 1748.054045] acpi LNXSYBUS:00: legacy freeze
[ 1748.054051] processor LNXCPU:00: legacy freeze
[ 1748.054059] acpi LNXSYSTM:00: legacy freeze
[ 1748.054118] nsc-ircc nsc-ircc.0: LATE freeze
[ 1748.054126] platform regulatory.0: LATE freeze
[ 1748.054137] psmouse serio2: LATE freeze
[ 1748.054143] ath5k 0000:07:00.0: LATE freeze
[ 1748.054151] psmouse serio1: LATE freeze
[ 1748.054156] atkbd serio0: LATE freeze
[ 1748.054161] i8042 i8042: LATE freeze
[ 1748.054172] serial8250 serial8250: LATE freeze
[ 1748.054184] platform microcode: LATE freeze
[ 1748.054189] platform pcspkr: LATE freeze
[ 1748.054196] e100 0000:02:08.0: LATE freeze
[ 1748.054202] yenta_cardbus 0000:02:00.1: LATE freeze
[ 1748.054278] yenta_cardbus 0000:02:00.0: LATE freeze
[ 1748.054358] pci 0000:01:00.0: LATE freeze
[ 1748.054401] Intel ICH Modem 0000:00:1f.6: LATE freeze
[ 1748.054407] Intel ICH 0000:00:1f.5: LATE freeze
[ 1748.054412] i801_smbus 0000:00:1f.3: LATE freeze
[ 1748.054418] PIIX_IDE 0000:00:1f.1: LATE freeze
[ 1748.054423] pci 0000:00:1f.0: LATE freeze
[ 1748.054458] pci 0000:00:1e.0: LATE freeze
[ 1748.054493] uhci_hcd 0000:00:1d.2: LATE freeze
[ 1748.054528] uhci_hcd 0000:00:1d.1: LATE freeze
[ 1748.054563] uhci_hcd 0000:00:1d.0: LATE freeze
[ 1748.054599] pci 0000:00:01.0: LATE freeze
[ 1748.054623] agpgart-intel 0000:00:00.0: LATE freeze
[ 1748.054659] platform dock.2: LATE freeze
[ 1748.054664] platform dock.1: LATE freeze
[ 1748.054669] platform dock.0: LATE freeze
[ 1748.054782] ACPI: Preparing to enter system sleep state S4
[ 1748.102139] PM: Saving platform NVS memory
[ 1748.106665] Checking wake-up interrupts
[ 1748.106683] Suspending System Devices
[ 1748.106689] Suspending type 'irqrouter':
[ 1748.106693] irqrouter0
[ 1748.106698] Suspending type 'clocksource':
[ 1748.106702] clocksource0
[ 1748.106706] Suspending type 'timekeeping':
[ 1748.106710] timekeeping0
[ 1748.106745] Suspending type 'ioapic':
[ 1748.106749] Suspending type 'machinecheck':
[ 1748.106753] machinecheck0
[ 1748.106763] Suspending type 'i8237':
[ 1748.106768] i82370
[ 1748.106772] Suspending type 'i8259':
[ 1748.106776] i82590
[ 1748.106782] Suspending type 'lapic':
[ 1748.106785] lapic0
[ 1748.106797] Suspending type 'cpu':
[ 1748.106801] cpu0
[ 1748.106814] PM: Creating hibernation image:
[ 1748.107008] PM: Need to copy 109606 pages
[ 1748.107008] PM: Restoring platform NVS memory
[ 1748.107008] Resuming System Devices
[ 1748.107008] Resuming type 'cpu':
[ 1748.107008] cpu0
[ 1748.107008] Resuming type 'lapic':
[ 1748.107008] lapic0
[ 1748.107008] Resuming type 'i8259':
[ 1748.107008] i82590
[ 1748.107008] Resuming type 'i8237':
[ 1748.107008] i82370
[ 1748.107008] Resuming type 'machinecheck':
[ 1748.107008] machinecheck0
[ 1748.107008] CPU0: Thermal LVT vector (0xfa) already installed
[ 1748.107008] Resuming type 'ioapic':
[ 1748.107008] Resuming type 'timekeeping':
[ 1748.107008] timekeeping0
[ 1748.107008] Resuming type 'clocksource':
[ 1748.107008] clocksource0
[ 1748.107008] Resuming type 'irqrouter':
[ 1748.107008] irqrouter0
[ 1748.110683] ------------[ cut here ]------------
[ 1748.110702] WARNING: at drivers/base/sys.c:353 __sysdev_resume+0x44/0xb0()
[ 1748.110708] Hardware name: 2366DG3
[ 1748.110717] Interrupts enabled after irqrouter_resume+0x0/0x43
[ 1748.110722] Modules linked in: sco bridge stp llc bnep rfcomm l2cap bluetooth speedstep_lib cpufreq_stats cpufreq_powersave binfmt_misc radeon ttm drm_kms_helper drm i2c_algo_bit cfbcopyarea cfbimgblt cfbfillrect snd_mixer_oss uvcvideo acpi_cpufreq arc4 ecb ath5k mac80211 ath nsc_ircc pcmcia rng_core irda video cfg80211 ac processor battery snd_intel8x0m output button uhci_hcd ehci_hcd usbcore thermal fan [last unloaded: scsi_wait_scan]
[ 1748.110801] Pid: 4424, comm: s2disk Not tainted 2.6.32-rc8 #2
[ 1748.110807] Call Trace:
[ 1748.110823] [<c012b300>] warn_slowpath_common+0x65/0x95
[ 1748.110832] [<c012b36e>] warn_slowpath_fmt+0x29/0x2c
[ 1748.110842] [<c02d42e6>] __sysdev_resume+0x44/0xb0
[ 1748.110851] [<c0288e7e>] ? irqrouter_resume+0x0/0x43
[ 1748.110860] [<c02d43d5>] sysdev_resume+0x83/0xbb
[ 1748.110871] [<c0153646>] create_image+0xaf/0xec
[ 1748.110880] [<c01536cf>] hibernation_snapshot+0x4c/0xb3
[ 1748.110890] [<c0155d40>] snapshot_ioctl+0x219/0x4ca
[ 1748.110902] [<c01a4bcc>] ? fsnotify_modify+0x62/0x6d
[ 1748.110911] [<c0155b27>] ? snapshot_ioctl+0x0/0x4ca
[ 1748.110922] [<c01af2d6>] vfs_ioctl+0x1e/0x56
[ 1748.110931] [<c01af8ef>] do_vfs_ioctl+0x2e7/0x310
[ 1748.110940] [<c01af95d>] sys_ioctl+0x45/0x5f
[ 1748.110951] [<c01033db>] sysenter_do_call+0x12/0x28
[ 1748.110958] ---[ end trace 3f6e46eae7590267 ]---
[ 1748.111038] ACPI: Waking up from system sleep state S4
[ 1748.189174] platform dock.0: EARLY restore
[ 1748.189183] platform dock.1: EARLY restore
[ 1748.189189] platform dock.2: EARLY restore
[ 1748.189195] agpgart-intel 0000:00:00.0: EARLY restore
[ 1748.189240] pci 0000:00:01.0: EARLY restore
[ 1748.189268] uhci_hcd 0000:00:1d.0: EARLY restore
[ 1748.191109] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 1748.191151] uhci_hcd 0000:00:1d.1: EARLY restore
[ 1748.193108] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[ 1748.193150] uhci_hcd 0000:00:1d.2: EARLY restore
[ 1748.193189] pci 0000:00:1e.0: EARLY restore
[ 1748.193228] pci 0000:00:1f.0: EARLY restore
[ 1748.193267] PIIX_IDE 0000:00:1f.1: EARLY restore
[ 1748.193304] PIIX_IDE 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2800003, writing 0x2800007)
[ 1748.193318] i801_smbus 0000:00:1f.3: EARLY restore
[ 1748.193356] Intel ICH 0000:00:1f.5: EARLY restore
[ 1748.193394] Intel ICH Modem 0000:00:1f.6: EARLY restore
[ 1748.193433] pci 0000:01:00.0: EARLY restore
[ 1748.193470] pci 0000:01:00.0: restoring config space at offset 0x1 (was 0x2b00387, writing 0x2b00383)
[ 1748.193489] yenta_cardbus 0000:02:00.0: EARLY restore
[ 1748.193654] yenta_cardbus 0000:02:00.1: EARLY restore
[ 1748.193673] yenta_cardbus 0000:02:00.1: restoring config space at offset 0xf (was 0x540020b, writing 0x500020b)
[ 1748.896037] e100 0000:02:08.0: EARLY restore
[ 1748.907049] e100 0000:02:08.0: restoring config space at offset 0xf (was 0x38080100, writing 0x3808010b)
[ 1748.907078] e100 0000:02:08.0: restoring config space at offset 0x3 (was 0x0, writing 0x4208)
[ 1748.907091] e100 0000:02:08.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900117)
[ 1748.907115] platform pcspkr: EARLY restore
[ 1748.907121] platform microcode: EARLY restore
[ 1748.907140] serial8250 serial8250: EARLY restore
[ 1748.907158] i8042 i8042: EARLY restore
[ 1748.907164] atkbd serio0: EARLY restore
[ 1748.907169] psmouse serio1: EARLY restore
[ 1748.907178] ath5k 0000:07:00.0: EARLY restore
[ 1748.907198] ath5k 0000:07:00.0: restoring config space at offset 0xf (was 0x1c0a0100, writing 0x1c0a010b)
[ 1748.907229] ath5k 0000:07:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xd8000000)
[ 1748.907240] ath5k 0000:07:00.0: restoring config space at offset 0x3 (was 0x0, writing 0xa820)
[ 1748.907254] ath5k 0000:07:00.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900006)
[ 1748.907274] psmouse serio2: EARLY restore
[ 1748.907286] platform regulatory.0: EARLY restore
[ 1748.907294] nsc-ircc nsc-ircc.0: EARLY restore
[ 1748.987965] acpi LNXSYSTM:00: legacy restore
[ 1748.987975] processor LNXCPU:00: legacy restore
[ 1748.987993] acpi LNXSYBUS:00: legacy restore
[ 1748.987999] pci_link PNP0C0F:00: legacy restore
[ 1748.988024] pci_link PNP0C0F:01: legacy restore
[ 1748.988031] pci_link PNP0C0F:02: legacy restore
[ 1748.988037] pci_link PNP0C0F:03: legacy restore
[ 1748.988043] pci_link PNP0C0F:04: legacy restore
[ 1748.988050] pci_link PNP0C0F:05: legacy restore
[ 1748.988056] pci_link PNP0C0F:06: legacy restore
[ 1748.988062] pci_link PNP0C0F:07: legacy restore
[ 1748.988069] acpi PNP0C01:00: legacy restore
[ 1748.988076] button PNP0C0D:00: legacy restore
[ 1748.990134] button PNP0C0E:00: legacy restore
[ 1748.990142] pci_root PNP0A03:00: legacy restore
[ 1748.990151] acpi device:00: legacy restore
[ 1748.990158] acpi PNP0C02:00: legacy restore
[ 1748.990164] acpi PNP0000:00: legacy restore
[ 1748.990170] acpi PNP0100:00: legacy restore
[ 1748.990176] acpi PNP0200:00: legacy restore
[ 1748.990182] acpi PNP0800:00: legacy restore
[ 1748.990188] acpi PNP0C04:00: legacy restore
[ 1748.990194] acpi PNP0B00:00: legacy restore
[ 1748.990200] acpi PNP0303:00: legacy restore
[ 1748.990206] acpi IBM0057:00: legacy restore
[ 1748.990213] acpi PNP0501:00: legacy restore
[ 1748.990219] acpi PNP0400:00: legacy restore
[ 1748.990225] acpi IBM0071:00: legacy restore
[ 1748.990231] ec PNP0C09:00: legacy restore
[ 1748.990244] power LNXPOWER:00: legacy restore
[ 1748.990670] battery PNP0C0A:00: legacy restore
[ 1749.007399] ac ACPI0003:00: legacy restore
[ 1749.007779] acpi IBM0068:00: legacy restore
[ 1749.007786] acpi device:01: legacy restore
[ 1749.007792] video LNXVIDEO:00: legacy restore
[ 1749.007801] acpi device:02: legacy restore
[ 1749.007807] acpi device:03: legacy restore
[ 1749.007812] acpi device:04: legacy restore
[ 1749.007818] acpi device:05: legacy restore
[ 1749.007824] acpi device:06: legacy restore
[ 1749.007829] acpi device:07: legacy restore
[ 1749.007835] acpi device:08: legacy restore
[ 1749.007841] acpi device:09: legacy restore
[ 1749.007846] acpi device:0a: legacy restore
[ 1749.007852] acpi device:0b: legacy restore
[ 1749.007857] acpi device:0c: legacy restore
[ 1749.007863] acpi device:0d: legacy restore
[ 1749.007869] acpi device:0e: legacy restore
[ 1749.007874] acpi device:0f: legacy restore
[ 1749.007880] acpi device:10: legacy restore
[ 1749.007885] acpi device:11: legacy restore
[ 1749.007891] acpi LNXTHERM:00: legacy restore
[ 1749.007898] thermal LNXTHERM:01: legacy restore
[ 1749.008585] button LNXPWRBN:00: legacy restore
[ 1749.008593] platform dock.0: restore
[ 1749.008600] platform dock.1: restore
[ 1749.008605] platform dock.2: restore
[ 1749.008614] agpgart-intel 0000:00:00.0: restore
[ 1749.008652] pm_op(): pci_pm_restore+0x0/0x7e returns -16
[ 1749.008659] PM: Device 0000:00:00.0 failed to restore: error -16
[ 1749.008666] pci 0000:00:01.0: restore
[ 1749.008682] uhci_hcd 0000:00:1d.0: restore
[ 1749.008694] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1749.008735] usb usb1: root hub lost power or was reset
[ 1749.008755] uhci_hcd 0000:00:1d.1: restore
[ 1749.008766] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1749.008804] usb usb2: root hub lost power or was reset
[ 1749.008822] uhci_hcd 0000:00:1d.2: restore
[ 1749.008832] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1749.008870] usb usb3: root hub lost power or was reset
[ 1749.008887] pci 0000:00:1e.0: restore
[ 1749.008899] pci 0000:00:1e.0: setting latency timer to 64
[ 1749.008907] pci 0000:00:1f.0: restore
[ 1749.008914] PIIX_IDE 0000:00:1f.1: restore
[ 1749.008933] PIIX_IDE 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 1749.008944] PIIX_IDE 0000:00:1f.1: setting latency timer to 64
[ 1749.008957] i801_smbus 0000:00:1f.3: restore
[ 1749.008964] Intel ICH 0000:00:1f.5: restore
[ 1749.008978] Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 1749.008991] Intel ICH 0000:00:1f.5: setting latency timer to 64
[ 1749.113497] Intel ICH Modem 0000:00:1f.6: restore
[ 1749.113514] Intel ICH Modem 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 1749.113526] Intel ICH Modem 0000:00:1f.6: setting latency timer to 64
[ 1749.114120] pci 0000:01:00.0: restore
[ 1749.114134] pci 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 1749.114147] yenta_cardbus 0000:02:00.0: restore
[ 1749.246133] yenta_cardbus 0000:02:00.1: restore
[ 1749.246142] e100 0000:02:08.0: restore
[ 1749.246164] pci 0000:00:1e.0: wake-up capability disabled by ACPI
[ 1749.246173] e100 0000:02:08.0: PME# disabled
[ 1749.246185] system 00:00: legacy restore
[ 1749.246194] pnp 00:01: legacy restore
[ 1749.246199] system 00:02: legacy restore
[ 1749.246206] pnp 00:03: legacy restore
[ 1749.246211] pnp 00:04: legacy restore
[ 1749.246217] pnp 00:05: legacy restore
[ 1749.246223] rtc_cmos 00:06: legacy restore
[ 1749.246231] i8042 kbd 00:07: legacy restore
[ 1749.246237] i8042 aux 00:08: legacy restore
[ 1749.246246] serial 00:09: legacy restore
[ 1749.247327] serial 00:09: activated
[ 1749.247346] pnp 00:0a: legacy restore
[ 1749.247352] nsc-ircc 00:0b: legacy restore
[ 1749.248745] nsc-ircc 00:0b: activated
[ 1749.248759] platform pcspkr: restore
[ 1749.248765] platform microcode: restore
[ 1749.248806] serial8250 serial8250: restore
[ 1749.248846] ide-gd 0.0: legacy restore
[ 1749.253093] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 1749.258148] hda: UDMA/100 mode selected
[ 1749.259077] i8042 i8042: restore
[ 1749.260985] atkbd serio0: restore
[ 1749.260995] psmouse serio1: restore
[ 1749.261016] rtc rtc0: legacy class restore
[ 1749.261049] i2c i2c-0: legacy restore
[ 1749.261057] input input0: type restore
[ 1749.261074] ac97 0-0:AD1881A: legacy restore
[ 1749.261085] ath5k 0000:07:00.0: restore
[ 1749.261108] ath5k 0000:07:00.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 1749.261119] input input1: type restore
[ 1749.261127] psmouse serio2: restore
[ 1749.261134] usb usb1: type restore
[ 1749.261143] usb usb2: type restore
[ 1749.261150] usb usb3: type restore
[ 1749.261158] input input2: type restore
[ 1749.261166] input input3: type restore
[ 1749.261173] input input4: type restore
[ 1749.261179] input input5: type restore
[ 1749.261187] ac97 1-1:Si3036,8: legacy restore
[ 1749.261195] platform regulatory.0: restore
[ 1749.261204] input input6: type restore
[ 1749.261212] nsc-ircc nsc-ircc.0: restore
[ 1749.261283] ieee80211 phy0: legacy class restore
[ 1749.261314] drm ttm: legacy class restore
[ 1749.261321] drm card0: legacy class restore
[ 1749.261370] nsc-ircc nsc-ircc.0: completing restore
[ 1749.261379] platform regulatory.0: completing restore
[ 1749.261392] usb usb3: completing type restore
[ 1749.261399] usb usb2: completing type restore
[ 1749.261406] usb usb1: completing type restore
[ 1749.261413] ath5k 0000:07:00.0: completing restore
[ 1749.261426] i8042 i8042: completing restore
[ 1749.261458] serial8250 serial8250: completing restore
[ 1749.261491] platform microcode: completing restore
[ 1749.261497] platform pcspkr: completing restore
[ 1749.261516] e100 0000:02:08.0: completing restore
[ 1749.261522] yenta_cardbus 0000:02:00.1: completing restore
[ 1749.261528] yenta_cardbus 0000:02:00.0: completing restore
[ 1749.261535] pci 0000:01:00.0: completing restore
[ 1749.261541] Intel ICH Modem 0000:00:1f.6: completing restore
[ 1749.261548] Intel ICH 0000:00:1f.5: completing restore
[ 1749.261554] i801_smbus 0000:00:1f.3: completing restore
[ 1749.261560] PIIX_IDE 0000:00:1f.1: completing restore
[ 1749.261566] pci 0000:00:1f.0: completing restore
[ 1749.261572] pci 0000:00:1e.0: completing restore
[ 1749.261578] uhci_hcd 0000:00:1d.2: completing restore
[ 1749.261585] uhci_hcd 0000:00:1d.1: completing restore
[ 1749.261591] uhci_hcd 0000:00:1d.0: completing restore
[ 1749.261597] pci 0000:00:01.0: completing restore
[ 1749.261602] agpgart-intel 0000:00:00.0: completing restore
[ 1749.261610] platform dock.2: completing restore
[ 1749.261615] platform dock.1: completing restore
[ 1749.261621] platform dock.0: completing restore
[ 1749.276071] Restarting tasks ... done.
reply other threads:[~2009-11-23 13:23 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ffd8902a0911230523n18c052bfse21e61cc903bec73@mail.gmail.com \
--to=cornogle@googlemail.com \
--cc=dri-devel@lists.sf.net \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®