From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S264320AbTLYQjO (ORCPT ); Thu, 25 Dec 2003 11:39:14 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S264322AbTLYQjO (ORCPT ); Thu, 25 Dec 2003 11:39:14 -0500 Received: from fmx2.freemail.hu ([195.228.242.222]:5239 "HELO fmx2.freemail.hu") by vger.kernel.org with SMTP id S264320AbTLYQjK convert rfc822-to-8bit (ORCPT ); Thu, 25 Dec 2003 11:39:10 -0500 Date: Thu, 25 Dec 2003 17:39:08 +0100 (CET) From: Max Payne <"max..payne"@freemail.hu> Subject: Re: IDE performance drop between 2.4.23 and 2.6.0 To: jfontain@free.fr cc: linux-kernel@vger.kernel.org Message-ID: X-Originating-IP: [81.182.116.211] X-HTTP-User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.6b) Gecko/20031208 MIME-Version: 1.0 Content-Type: TEXT/PLAIN; CHARSET=ISO-8859-2 Content-Transfer-Encoding: 8BIT Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Hi! IO scheduler issue? Please try repeating your tests with 'elevator=deadline' at boot. 2003-12-23, k keltezéssel Jean-Luc Fontaine ezt írta: > Using hdparm -Tt /dev/hdb: > > on 2.4: > Timing buffer-cache reads: 168 MB in 2.01 seconds = 83.58 MB/sec > Timing buffered disk reads: 44 MB in 3.12 seconds = 14.10 MB/sec > on 2.6: > Timing buffer-cache reads: 172 MB in 2.02 seconds = 84.95 MB/sec > Timing buffered disk reads: 34 MB in 3.08 seconds = 11.04 MB/sec > > Note the big drop of of 3 MB/sec on disk reads. > > dmesg (edited) gives: > > on 2.4: > VP_IDE: VIA vt82c586b (rev 41) IDE UDMA33 controller on pci00:07.1 > hdb: IC35L040AVVN07-0, ATA DISK drive > hdb: 80418240 sectors (41174 MB) w/1863KiB Cache, CHS=79780/16/63, > UDMA(33) > on 2.6: > VP_IDE: VIA vt82c586b (rev 41) IDE UDMA33 controller on pci0000:00:07.1 > hdb: IC35L040AVVN07-0, ATA DISK drive > hdb: 80418240 sectors (41174 MB) w/1863KiB Cache, CHS=65535/16/63, > UDMA(33) > > hdparm -i output is identical between the 2 kernels and hdparm settings > are identical as follows (except cylinders as above): > > Model=IC35L040AVVN07-0, FwRev=VA2OAG0A, SerialNo=VNP210B2RAP0TB > Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs } > RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=52 > BuffType=DualPortCache, BuffSize=1863kB, MaxMultSect=16, MultSect=16 > CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=80418240 > IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120} > PIO modes: pio0 pio1 pio2 pio3 pio4 > DMA modes: mdma0 mdma1 mdma2 > UDMA modes: udma0 udma1 *udma2 udma3 udma4 udma5 > AdvancedPM=yes: disabled (255) WriteCache=enabled > Drive conforms to: ATA/ATAPI-5 T13 1321D revision 1: > > multcount = 16 (on) > IO_support = 1 (32-bit) > unmaskirq = 1 (on) > using_dma = 1 (on) > keepsettings = 0 (off) > readonly = 0 (off) > readahead = 8 (on) > geometry = 79780/16/63, sectors = 80418240, start = 0 > > I noticed a difference in dmesg: > on 2.4: > Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 > on 2.6: > Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 > > Could that make a difference? > > Please let me know if you'd like me to run more tests, patch kernels, > ..., anything to regain the performance. > > > Many thanks in advance, > > -- > Jean-Luc Fontaine