From: Oleksandr Natalenko <pfactum@gmail.com>
To: linux-kernel@vger.kernel.org
Subject: Re: [PATCH]RIFS-V3-Test For 3.4.x kernel.
Date: Sun, 08 Jul 2012 12:21:05 +0300 [thread overview]
Message-ID: <jtbje0$iiv$1@dough.gmane.org> (raw)
In-Reply-To: <CANQmPXjXt4KsYix5syDrRo_qt3DD7tMtHpdNa3Sh-fWhi53Lnw@mail.gmail.com>
The funniest thing is that desktop users started to use systemd (e.g. in
Fedora) which means they cannot even boot without cgroups. Note that :).
08.07.12 06:37, Chen написав(ла):
> I haven't made any support for Cgroup yet. After I finished
> translating the scheduler in modular form it will support Cgroup
> naturally since the modular scheduler support Cgroup.
>
> Anyway it is for desktop users and I don't think I have to support
> Cgroup in short term.
>
> I am going to post the graphical benchmark between RIFS-V3-Test and
> CFS. On my box, The latency of CFS is 8 times of RIFS
> averagely.However I am not using my computer right now so I can't post
> my benchmark now.
>
>
> On Sun, Jul 8, 2012 at 6:01 AM, Oleksandr Natalenko <pfactum@gmail.com> wrote:
>> Could you please make some chart to visually compare latencies with CFS?
>>
>> Also, has RIFS got cgroups support?
>>
>> 07.07.12 23:58, Chen написав(ла):
>>> 1. Benchmark:
>>> [admin@localhost ~]$ latt -c255 sleep 10
>>>
>>> Parameters: min_wait=100ms, max_wait=500ms, clients=255
>>> Entries logged: 1020
>>>
>>> Wakeup averages
>>> -------------------------------------
>>> Max 106549 usec
>>> Avg 1446 usec
>>> Stdev 6182 usec
>>> Stdev mean 194 usec
>>>
>>> Work averages
>>> -------------------------------------
>>> Max 2793229 usec
>>> Avg 2189141 usec
>>> Stdev 351389 usec
>>> Stdev mean 11002 usec
>>> [admin@localhost ~]$ latt -c128 sleep 10
>>>
>>> Parameters: min_wait=100ms, max_wait=500ms, clients=128
>>> Entries logged: 768
>>>
>>> Wakeup averages
>>> -------------------------------------
>>> Max 70824 usec
>>> Avg 1761 usec
>>> Stdev 5074 usec
>>> Stdev mean 183 usec
>>>
>>> Work averages
>>> -------------------------------------
>>> Max 1464295 usec
>>> Avg 1163262 usec
>>> Stdev 210801 usec
>>> Stdev mean 7607 usec
>>> [admin@localhost ~]$ latt -c64 sleep 10
>>>
>>> Parameters: min_wait=100ms, max_wait=500ms, clients=64
>>> Entries logged: 640
>>>
>>> Wakeup averages
>>> -------------------------------------
>>> Max 53780 usec
>>> Avg 1375 usec
>>> Stdev 4772 usec
>>> Stdev mean 189 usec
>>>
>>> Work averages
>>> -------------------------------------
>>> Max 797045 usec
>>> Avg 596825 usec
>>> Stdev 111695 usec
>>> Stdev mean 4415 usec
>>> [admin@localhost ~]$ latt -c32 sleep 10
>>>
>>> Parameters: min_wait=100ms, max_wait=500ms, clients=32
>>> Entries logged: 480
>>>
>>> Wakeup averages
>>> -------------------------------------
>>> Max 86032 usec
>>> Avg 2147 usec
>>> Stdev 7659 usec
>>> Stdev mean 350 usec
>>>
>>> Work averages
>>> -------------------------------------
>>> Max 374303 usec
>>> Avg 309004 usec
>>> Stdev 43155 usec
>>> Stdev mean 1970 usec
>>> [admin@localhost ~]$ latt -c16 sleep 10
>>>
>>> Parameters: min_wait=100ms, max_wait=500ms, clients=16
>>> Entries logged: 320
>>>
>>> Wakeup averages
>>> -------------------------------------
>>> Max 41166 usec
>>> Avg 1150 usec
>>> Stdev 4706 usec
>>> Stdev mean 263 usec
>>>
>>> Work averages
>>> -------------------------------------
>>> Max 178917 usec
>>> Avg 155367 usec
>>> Stdev 16074 usec
>>> Stdev mean 899 usec
>>> [admin@localhost ~]$ latt -c8 sleep 10
>>>
>>> Parameters: min_wait=100ms, max_wait=500ms, clients=8
>>> Entries logged: 184
>>>
>>> Wakeup averages
>>> -------------------------------------
>>> Max 20256 usec
>>> Avg 585 usec
>>> Stdev 2306 usec
>>> Stdev mean 170 usec
>>>
>>> Work averages
>>> -------------------------------------
>>> Max 88262 usec
>>> Avg 75957 usec
>>> Stdev 7102 usec
>>> Stdev mean 524 usec
>>> [admin@localhost ~]$ latt -c4 sleep 10
>>>
>>> Parameters: min_wait=100ms, max_wait=500ms, clients=4
>>> Entries logged: 104
>>>
>>> Wakeup averages
>>> -------------------------------------
>>> Max 7950 usec
>>> Avg 663 usec
>>> Stdev 1719 usec
>>> Stdev mean 169 usec
>>>
>>> Work averages
>>> -------------------------------------
>>> Max 50647 usec
>>> Avg 38685 usec
>>> Stdev 4053 usec
>>> Stdev mean 397 usec
>>> [admin@localhost ~]$ latt -c2 sleep 10
>>>
>>> Parameters: min_wait=100ms, max_wait=500ms, clients=2
>>> Entries logged: 54
>>>
>>> Wakeup averages
>>> -------------------------------------
>>> Max 33 usec
>>> Avg 9 usec
>>> Stdev 5 usec
>>> Stdev mean 1 usec
>>>
>>> Work averages
>>> -------------------------------------
>>> Max 21700 usec
>>> Avg 20590 usec
>>> Stdev 258 usec
>>> Stdev mean 35 usec
>>> [admin@localhost ~]$ latt -c1 sleep 10
>>>
>>> Parameters: min_wait=100ms, max_wait=500ms, clients=1
>>> Entries logged: 27
>>>
>>> Wakeup averages
>>> -------------------------------------
>>> Max 22 usec
>>> Avg 9 usec
>>> Stdev 3 usec
>>> Stdev mean 1 usec
>>>
>>> Work averages
>>> -------------------------------------
>>> Max 20614 usec
>>> Avg 20162 usec
>>> Stdev 125 usec
>>> Stdev mean 24 usec
>>>
>>>
>>>
>>> RIFS-V3 is the new name of RIFS-ES. It looks like CFS. but with RIFS,
>>> the latency is much lower.
>>>
>>
>>
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>> Please read the FAQ at http://www.tux.org/lkml/
next prev parent reply other threads:[~2012-07-08 9:21 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-07 20:58 Chen
2012-07-07 22:01 ` Oleksandr Natalenko
2012-07-08 3:37 ` Chen
2012-07-08 9:21 ` Oleksandr Natalenko [this message]
2012-07-08 12:16 ` Chen
2012-07-08 12:23 ` richard -rw- weinberger
[not found] ` <CANQmPXiMhahyT5BQAaw5tSX9fzJUp6mqjHz7FgEy=9nLqy2-9A@mail.gmail.com>
2012-07-08 13:32 ` Chen
2012-07-08 14:14 ` Oleksandr Natalenko
2012-07-09 12:37 ` Hillf Danton
2012-07-09 13:07 ` richard -rw- weinberger
2012-07-09 13:18 ` Hillf Danton
2012-07-09 15:52 ` Jan Ceuleers
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='jtbje0$iiv$1@dough.gmane.org' \
--to=pfactum@gmail.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome