Hello,

I just tried to boot 3.7 and it ends in an APIC panic. I tried to use 
the recommended "apic=debug", but that does not change anything in the 
output, at least not in the visible part. The last known kernel to boot 
was 3.5. If it matters I can try to boot 3.6.

Also, the recommended "noapic" option makes it boot a little bit 
further, but then ahci does not work properly and fails to detect hard 
disks.

Attached is a photo from the failure and dmesg with 3.4.7.


Cheers,
BErnd