[78/83] USB: spcp8x5: fix device initialisation at open

[Ben Hutchings <ben@decadent.org.uk>]

3.2.47-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Johan Hovold <jhovold@gmail.com>

commit 5e4211f1c47560c36a8b3d4544dfd866dcf7ccd0 upstream.

Do not use uninitialised termios data to determine when to configure the
device at open.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.2: tty_struct::termios is a pointer, not a struct]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/usb/serial/spcp8x5.c |   10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)

--- a/drivers/usb/serial/spcp8x5.c
+++ b/drivers/usb/serial/spcp8x5.c
@@ -338,7 +338,6 @@ static void spcp8x5_set_termios(struct t
 	struct spcp8x5_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
 	unsigned int cflag = tty->termios->c_cflag;
-	unsigned int old_cflag = old_termios->c_cflag;
 	unsigned short uartdata;
 	unsigned char buf[2] = {0, 0};
 	int baud;
@@ -347,15 +346,15 @@ static void spcp8x5_set_termios(struct t
 
 
 	/* check that they really want us to change something */
-	if (!tty_termios_hw_change(tty->termios, old_termios))
+	if (old_termios && !tty_termios_hw_change(tty->termios, old_termios))
 		return;
 
 	/* set DTR/RTS active */
 	spin_lock_irqsave(&priv->lock, flags);
 	control = priv->line_control;
-	if ((old_cflag & CBAUD) == B0) {
+	if (old_termios && (old_termios->c_cflag & CBAUD) == B0) {
 		priv->line_control |= MCR_DTR;
-		if (!(old_cflag & CRTSCTS))
+		if (!(old_termios->c_cflag & CRTSCTS))
 			priv->line_control |= MCR_RTS;
 	}
 	if (control != priv->line_control) {
@@ -445,7 +444,6 @@ static void spcp8x5_set_termios(struct t
  * status of the device. */
 static int spcp8x5_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
-	struct ktermios tmp_termios;
 	struct usb_serial *serial = port->serial;
 	struct spcp8x5_private *priv = usb_get_serial_port_data(port);
 	int ret;
@@ -468,7 +466,7 @@ static int spcp8x5_open(struct tty_struc
 
 	/* Setup termios */
 	if (tty)
-		spcp8x5_set_termios(tty, port, &tmp_termios);
+		spcp8x5_set_termios(tty, port, NULL);
 
 	spcp8x5_get_msr(serial->dev, &status, priv->type);