From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S964814AbbLXPob (ORCPT ); Thu, 24 Dec 2015 10:44:31 -0500 Received: from shadbolt.e.decadent.org.uk ([88.96.1.126]:51552 "EHLO shadbolt.e.decadent.org.uk" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754382AbbLXPme (ORCPT ); Thu, 24 Dec 2015 10:42:34 -0500 Content-Type: text/plain; charset="UTF-8" Content-Disposition: inline Content-Transfer-Encoding: 8bit MIME-Version: 1.0 From: Ben Hutchings To: linux-kernel@vger.kernel.org, stable@vger.kernel.org CC: akpm@linux-foundation.org, "Jonas Jonsson" , "Johan Hovold" , "Daniele Palmas" Date: Thu, 24 Dec 2015 15:37:42 +0000 Message-ID: X-Mailer: LinuxStableQueue (scripts by bwh) Subject: [PATCH 3.2 26/77] USB: cdc_acm: Ignore Infineon Flash Loader utility In-Reply-To: X-SA-Exim-Connect-IP: 192.168.4.247 X-SA-Exim-Mail-From: ben@decadent.org.uk X-SA-Exim-Scanned: No (on shadbolt.decadent.org.uk); SAEximRunCond expanded to false Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org 3.2.75-rc1 review patch. If anyone has any objections, please let me know. ------------------ From: Jonas Jonsson commit f33a7f72e5fc033daccbb8d4753d7c5c41a4d67b upstream. Some modems, such as the Telit UE910, are using an Infineon Flash Loader utility. It has two interfaces, 2/2/0 (Abstract Modem) and 10/0/0 (CDC Data). The latter can be used as a serial interface to upgrade the firmware of the modem. However, that isn't possible when the cdc-acm driver takes control of the device. The following is an explanation of the behaviour by Daniele Palmas during discussion on linux-usb. "This is what happens when the device is turned on (without modifying the drivers): [155492.352031] usb 1-3: new high-speed USB device number 27 using ehci-pci [155492.485429] usb 1-3: config 1 interface 0 altsetting 0 endpoint 0x81 has an invalid bInterval 255, changing to 11 [155492.485436] usb 1-3: New USB device found, idVendor=058b, idProduct=0041 [155492.485439] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [155492.485952] cdc_acm 1-3:1.0: ttyACM0: USB ACM device This is the flashing device that is caught by the cdc-acm driver. Once the ttyACM appears, the application starts sending a magic string (simple write on the file descriptor) to keep the device in flashing mode. If this magic string is not properly received in a certain time interval, the modem goes on in normal operative mode: [155493.748094] usb 1-3: USB disconnect, device number 27 [155494.916025] usb 1-3: new high-speed USB device number 28 using ehci-pci [155495.059978] usb 1-3: New USB device found, idVendor=1bc7, idProduct=0021 [155495.059983] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [155495.059986] usb 1-3: Product: 6 CDC-ACM + 1 CDC-ECM [155495.059989] usb 1-3: Manufacturer: Telit [155495.059992] usb 1-3: SerialNumber: 359658044004697 [155495.138958] cdc_acm 1-3:1.0: ttyACM0: USB ACM device [155495.140832] cdc_acm 1-3:1.2: ttyACM1: USB ACM device [155495.142827] cdc_acm 1-3:1.4: ttyACM2: USB ACM device [155495.144462] cdc_acm 1-3:1.6: ttyACM3: USB ACM device [155495.145967] cdc_acm 1-3:1.8: ttyACM4: USB ACM device [155495.147588] cdc_acm 1-3:1.10: ttyACM5: USB ACM device [155495.154322] cdc_ether 1-3:1.12 wwan0: register 'cdc_ether' at usb-0000:00:1a.7-3, Mobile Broadband Network Device, 00:00:11:12:13:14 Using the cdc-acm driver, the string, though being sent in the same way than using the usb-serial-simple driver (I can confirm that the data is passing properly since I used an hw usb sniffer), does not make the device to stay in flashing mode." Signed-off-by: Jonas Jonsson Tested-by: Daniele Palmas Signed-off-by: Johan Hovold Signed-off-by: Ben Hutchings --- drivers/usb/class/cdc-acm.c | 5 +++++ 1 file changed, 5 insertions(+) --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -1666,6 +1666,11 @@ static const struct usb_device_id acm_id .driver_info = NO_DATA_INTERFACE, }, + /* Exclude Infineon Flash Loader utility */ + { USB_DEVICE(0x058b, 0x0041), + .driver_info = IGNORE_DEVICE, + }, + /* control interfaces without any protocol set */ { USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM, USB_CDC_PROTO_NONE) },