From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S267334AbUHMVGy (ORCPT ); Fri, 13 Aug 2004 17:06:54 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S267425AbUHMVGy (ORCPT ); Fri, 13 Aug 2004 17:06:54 -0400 Received: from proxy.hsp-law.de ([62.48.88.110]:16074 "EHLO gjba.hsp-law.de") by vger.kernel.org with ESMTP id S267334AbUHMVGv (ORCPT ); Fri, 13 Aug 2004 17:06:51 -0400 To: Bjorn Helgaas Subject: Re: rc4-mm1 pci-routing Cc: linux-kernel@vger.kernel.org, Ralf Gerbig References: <200408111642.59938.bjorn.helgaas@hp.com> From: Ralf Gerbig Date: 13 Aug 2004 23:06:47 +0200 Message-ID: User-Agent: Gnus/5.0808 (Gnus v5.8.8) XEmacs/21.4 (Artificial Intelligence) MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Hi Bjorn, Executive summery: Sorry for the noise. > I'm sorry, I'm completely lost. You mention an oops, but I don't > see one in the transcript you posted. Sorry I should have have explained the mess. > You originally mentioned a hang while alsa was starting up. But > the transcript you posted doesn't show a hang. Does it work when > the drivers are builtin, but hang when they are modules? Here goes: The on the first boot of rc4-mm1 the last line on the screen was about starting ALSA, so I assumed that was what broke and sent the diff of the 'boot.msg' (SuSE 9.1) with and without pci=routeirq. Then I compiled the intel8x0 driver into the kernel send the resulting boot.msg with pci=routeirq. Thereafter I hooked up a serial console and found an oops from the 'wondershaper' and other unrelated breakage. Returning to my original .config and moving the shaper to a later position in the boot process everything just worked even without pci=routeirq. That is the last trace I sent. > lspci shows some sort of ISDN card, but I don't see a driver for > it. Are you using that? Yes, startmode is manual and it works: ISDN subsystem Rev:1.1.2.3/1.1.2.3/1.1.2.2/1.1.2.3/none/1.1.2.2 loaded HiSax: LinuxDriver for passive ISDN cards HiSax: Version 3.5 (module) HiSax: Layer1 Revision 2.46.2.5 HiSax: Layer2 Revision 2.30.2.4 HiSax: TeiMgr Revision 2.20.2.3 HiSax: Layer3 Revision 2.22.2.3 HiSax: LinkLayer Revision 2.59.2.4 hisax_isac: ISAC-S/ISAC-SX ISDN driverv0.1.0 hisax_fcpcipnp: Fritz!Card PCI/PCIv2/PnP ISDN driver v0.0.1 HiSax: Card 1 Protocol EDSS1 Id=fcpcipnp0 (0) HiSax: DSS1 Rev. 2.32.2.3 HiSax: 2 channels added HiSax: MAX_WAITING_CALLS added ACPI: PCI interrupt 0000:01:07.0[A] ->GSI 19 (level, high) -> IRQ 19 hisax_fcpcipnp: found adapter Fritz!Card PCI v2 at 0000:01:07.0 Ralf -- Ralf Gerbig // P: Linus Torvalds Dr. Heinz Schaefer & Partner //-S: Buried alive in diapers //+S: Buried alive in reporters patch-2.2.4