mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: ebiederm@xmission.com (Eric W. Biederman)
To: "Adam Litke" <aglitke@gmail.com>
Cc: "Adam Litke" <agl@us.ibm.com>, "dean gaudet" <dean@arctic.org>,
	"William Lee Irwin III" <wli@holomorphy.com>,
	linux-kernel@vger.kernel.org, ak@suse.de, clameter@sgi.com
Subject: Re: [shm][hugetlb] Fix get_policy for stacked shared memory files
Date: Tue, 12 Jun 2007 12:22:08 -0600	[thread overview]
Message-ID: <m18xapowxb.fsf@ebiederm.dsl.xmission.com> (raw)
In-Reply-To: <a0a62dfc0706120732y5347431eyf11e9d57965f17f0@mail.gmail.com> (Adam Litke's message of "Tue, 12 Jun 2007 09:32:59 -0500")

"Adam Litke" <aglitke@gmail.com> writes:

> On 6/12/07, Eric W. Biederman <ebiederm@xmission.com> wrote:
>> Adam Litke <agl@us.ibm.com> writes:
>>
>> > Here's another breakage as a result of shared memory stacked files :(
>> >
>> > The NUMA policy for a VMA is determined by checking the following (in the
> order
>> > given):

Where that doesn't appear to be what the current code does.
If there is a VMA it doesn't appear that we check task->mempolicy.

>> > 1) vma->vm_ops->get_policy() (if defined)
>> > 2) vma->vm_policy (if defined)
>> > 3) task->mempolicy (if defined)
>> > 4) Fall back to default_policy
>> >
>> > By switching to stacked files for shared memory, get_policy() is now always
> set
>> > to shm_get_policy which is a wrapper function.  This causes us to stop at
> step
>> > 1, which yields NULL for hugetlb instead of task->mempolicy which was the
>> > previous (and correct) result.
>> >
>> > This patch modifies the shm_get_policy() wrapper to maintain steps 1-3 for
> the
>> > wrapped vm_ops.  Andi and Christoph, does this look right to you?
>>
>> I'm confused.
>>
>> I agree that the behavior you describe is correct.
>> However I only see two code paths were get_policy is called and
>> both of them take a NULL result and change it to task->mempolicy:
>
> The coffee hasn't quite absorbed yet, but don't those two code paths
> take a NULL result from get_policy() and turn it into default_policy,
> not task->mempolicy?

True, a NULL is turned into default_policy.  However the basic
confusion remains.   I don't see how we ever return task->mempolicy
on those paths if we have a vma, and those appear to be the only
call sites of get_policy.

>> From mm/mempolicy.c
>>
>> > long do_get_mempolicy(int *policy, nodemask_t *nmask,
>> >                       unsigned long addr, unsigned long flags)
>> > {
>> >       int err;
>> >       struct mm_struct *mm = current->mm;
>> >       struct vm_area_struct *vma = NULL;
>> >       struct mempolicy *pol = current->mempolicy;
>> >
>> >       cpuset_update_task_memory_state();
>> >       if (flags & ~(unsigned long)(MPOL_F_NODE|MPOL_F_ADDR))
>> >               return -EINVAL;
>> >       if (flags & MPOL_F_ADDR) {
>> >               down_read(&mm->mmap_sem);
>> >               vma = find_vma_intersection(mm, addr, addr+1);
>> >               if (!vma) {
>> >                       up_read(&mm->mmap_sem);
>> >                       return -EFAULT;
>> >               }
>> >               if (vma->vm_ops && vma->vm_ops->get_policy)
>> >                       pol = vma->vm_ops->get_policy(vma, addr);
>> >               else
>> >                       pol = vma->vm_policy;
>> >       } else if (addr)
>> >               return -EINVAL;
>> >
>> >       if (!pol)
>> >               pol = &default_policy;
>>
>>
>>
>> > /* Return effective policy for a VMA */
>> > static struct mempolicy * get_vma_policy(struct task_struct *task,
>> >               struct vm_area_struct *vma, unsigned long addr)
>> > {
>> >       struct mempolicy *pol = task->mempolicy;
>> >
>> >       if (vma) {
>> >               if (vma->vm_ops && vma->vm_ops->get_policy)
>> >                       pol = vma->vm_ops->get_policy(vma, addr);
>> >               else if (vma->vm_policy &&
>> >                               vma->vm_policy->policy != MPOL_DEFAULT)
>> >                       pol = vma->vm_policy;
>> >       }
>> >       if (!pol)
>> >               pol = &default_policy;
>> >       return pol;
>> > }
>>
>>
>> Does this perhaps need to be:
>> > Signed-off-by: Adam Litke <agl@us.ibm.com>
>> >
>> > diff --git a/ipc/shm.c b/ipc/shm.c
>> > index 4fefbad..8d2672d 100644
>> > --- a/ipc/shm.c
>> > +++ b/ipc/shm.c
>> > @@ -254,8 +254,10 @@ struct mempolicy *shm_get_policy(struct vm_area_struct
>> > *vma, unsigned long addr)
>>
>> +       pol = NULL;
>> >
>> >       if (sfd->vm_ops->get_policy)
>> >               pol = sfd->vm_ops->get_policy(vma, addr);
>> > -     else
>> > +     else if (vma->vm_policy && vma->vm_policy->policy != MPOL_DEFAULT)
>> >               pol = vma->vm_policy;
>> >       return pol;
>> >  }
>> >  #endif
>
> afaict this would provide no way for pol to be set to task->mempolicy
> for hugetlb per my comment above.

Being dense I don't see a way for us to have ever returned task->mempolicy.

So perhaps something else changed.  Or something was made more
consistent and another bug was revealed.

I don't truly see the bug in shm_get_policy.  I can see why it would
not have the expected affect but that is different.

Eric

      reply	other threads:[~2007-06-12 18:23 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-05-16  5:41 2.6.21 numa policy and huge pages not working dean gaudet
2007-05-16  6:12 ` William Lee Irwin III
2007-06-09 18:06   ` dean gaudet
2007-06-10  4:10   ` dean gaudet
2007-06-10  4:51     ` William Lee Irwin III
2007-06-11 16:23     ` Adam Litke
2007-06-11 21:34     ` [shm][hugetlb] Fix get_policy for stacked shared memory files Adam Litke
2007-06-12  3:36       ` dean gaudet
2007-06-12  3:51       ` William Lee Irwin III
2007-06-12  4:30       ` Andrew Morton
2007-06-12  4:48         ` William Lee Irwin III
2007-06-12 10:20         ` Andi Kleen
2007-06-12  6:20       ` Eric W. Biederman
2007-06-12  6:58         ` William Lee Irwin III
2007-06-12 14:32         ` Adam Litke
2007-06-12 18:22           ` Eric W. Biederman [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=m18xapowxb.fsf@ebiederm.dsl.xmission.com \
    --to=ebiederm@xmission.com \
    --cc=agl@us.ibm.com \
    --cc=aglitke@gmail.com \
    --cc=ak@suse.de \
    --cc=clameter@sgi.com \
    --cc=dean@arctic.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=wli@holomorphy.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome