From: ebiederm@xmission.com (Eric W. Biederman)
To: Andi Kleen <ak@suse.de>
Cc: virtualization <virtualization@lists.linux-foundation.org>,
<linux-kernel@vger.kernel.org>, "H. Peter Anvin" <hpa@zytor.com>,
Dave Jones <davej@redhat.com>,
Andrew Morton <akpm@linux-foundation.org>,
Jeremy Fitzhardinge <jeremy@goop.org>
Subject: [PATCH 05/12] i386: During page table initialization always set the leaf page table entries.
Date: Mon, 30 Apr 2007 10:03:27 -0600 [thread overview]
Message-ID: <m1r6q14zow.fsf_-_@ebiederm.dsl.xmission.com> (raw)
In-Reply-To: <m1vefd4zyj.fsf_-_@ebiederm.dsl.xmission.com> (Eric W. Biederman's message of "Mon, 30 Apr 2007 09:57:40 -0600")
If we don't set the leaf page table entries it is quite possible that
will inherit and incorrect page table entry from the initial boot
page table setup in head.S. So we need to redo the effort here,
so we pick up PSE, PGE and the like.
Hypervisors like Xen require that their page tables be read-only,
which is slightly incompatible with our low identity mappings, however
I discussed this with Jeremy he has modified the Xen early set_pte
function to avoid problems in this area.
Andi I sent this once a part of the discussion on this issue so
you may already have this patch in your queue.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
---
arch/i386/mm/init.c | 52 +++++++++++++++++++-------------------------------
1 files changed, 20 insertions(+), 32 deletions(-)
diff --git a/arch/i386/mm/init.c b/arch/i386/mm/init.c
index b77a43c..dbe16f6 100644
--- a/arch/i386/mm/init.c
+++ b/arch/i386/mm/init.c
@@ -63,18 +63,18 @@ static pmd_t * __init one_md_table_init(pgd_t *pgd)
pmd_t *pmd_table;
#ifdef CONFIG_X86_PAE
- pmd_table = (pmd_t *) alloc_bootmem_low_pages(PAGE_SIZE);
-
- paravirt_alloc_pd(__pa(pmd_table) >> PAGE_SHIFT);
- set_pgd(pgd, __pgd(__pa(pmd_table) | _PAGE_PRESENT));
- pud = pud_offset(pgd, 0);
- if (pmd_table != pmd_offset(pud, 0))
- BUG();
-#else
+ if (!(pgd_val(*pgd) & _PAGE_PRESENT)) {
+ pmd_table = (pmd_t *) alloc_bootmem_low_pages(PAGE_SIZE);
+
+ paravirt_alloc_pd(__pa(pmd_table) >> PAGE_SHIFT);
+ set_pgd(pgd, __pgd(__pa(pmd_table) | _PAGE_PRESENT));
+ pud = pud_offset(pgd, 0);
+ if (pmd_table != pmd_offset(pud, 0))
+ BUG();
+ }
+#endif
pud = pud_offset(pgd, 0);
pmd_table = pmd_offset(pud, 0);
-#endif
-
return pmd_table;
}
@@ -84,7 +84,7 @@ static pmd_t * __init one_md_table_init(pgd_t *pgd)
*/
static pte_t * __init one_page_table_init(pmd_t *pmd)
{
- if (pmd_none(*pmd)) {
+ if (!(pmd_val(*pmd) & _PAGE_PRESENT)) {
pte_t *page_table = (pte_t *) alloc_bootmem_low_pages(PAGE_SIZE);
paravirt_alloc_pt(__pa(page_table) >> PAGE_SHIFT);
@@ -109,7 +109,6 @@ static pte_t * __init one_page_table_init(pmd_t *pmd)
static void __init page_table_range_init (unsigned long start, unsigned long end, pgd_t *pgd_base)
{
pgd_t *pgd;
- pud_t *pud;
pmd_t *pmd;
int pgd_idx, pmd_idx;
unsigned long vaddr;
@@ -120,13 +119,10 @@ static void __init page_table_range_init (unsigned long start, unsigned long end
pgd = pgd_base + pgd_idx;
for ( ; (pgd_idx < PTRS_PER_PGD) && (vaddr != end); pgd++, pgd_idx++) {
- if (!(pgd_val(*pgd) & _PAGE_PRESENT))
- one_md_table_init(pgd);
- pud = pud_offset(pgd, vaddr);
- pmd = pmd_offset(pud, vaddr);
+ pmd = one_md_table_init(pgd);
+ pmd = pmd + pmd_index(vaddr);
for (; (pmd_idx < PTRS_PER_PMD) && (vaddr != end); pmd++, pmd_idx++) {
- if (pmd_none(*pmd))
- one_page_table_init(pmd);
+ one_page_table_init(pmd);
vaddr += PMD_SIZE;
}
@@ -159,11 +155,7 @@ static void __init kernel_physical_mapping_init(pgd_t *pgd_base)
pfn = 0;
for (; pgd_idx < PTRS_PER_PGD; pgd++, pgd_idx++) {
- if (!(pgd_val(*pgd) & _PAGE_PRESENT))
- pmd = one_md_table_init(pgd);
- else
- pmd = pmd_offset(pud_offset(pgd, PAGE_OFFSET), PAGE_OFFSET);
-
+ pmd = one_md_table_init(pgd);
if (pfn >= max_low_pfn)
continue;
for (pmd_idx = 0; pmd_idx < PTRS_PER_PMD && pfn < max_low_pfn; pmd++, pmd_idx++) {
@@ -172,12 +164,11 @@ static void __init kernel_physical_mapping_init(pgd_t *pgd_base)
/* Map with big pages if possible, otherwise create normal page tables. */
if (cpu_has_pse) {
unsigned int address2 = (pfn + PTRS_PER_PTE - 1) * PAGE_SIZE + PAGE_OFFSET + PAGE_SIZE-1;
- if (!pmd_present(*pmd)) {
- if (is_kernel_text(address) || is_kernel_text(address2))
- set_pmd(pmd, pfn_pmd(pfn, PAGE_KERNEL_LARGE_EXEC));
- else
- set_pmd(pmd, pfn_pmd(pfn, PAGE_KERNEL_LARGE));
- }
+ if (is_kernel_text(address) || is_kernel_text(address2))
+ set_pmd(pmd, pfn_pmd(pfn, PAGE_KERNEL_LARGE_EXEC));
+ else
+ set_pmd(pmd, pfn_pmd(pfn, PAGE_KERNEL_LARGE));
+
pfn += PTRS_PER_PTE;
} else {
pte = one_page_table_init(pmd);
@@ -185,9 +176,6 @@ static void __init kernel_physical_mapping_init(pgd_t *pgd_base)
for (pte_ofs = 0;
pte_ofs < PTRS_PER_PTE && pfn < max_low_pfn;
pte++, pfn++, pte_ofs++, address += PAGE_SIZE) {
- if (pte_present(*pte))
- continue;
-
if (is_kernel_text(address))
set_pte(pte, pfn_pte(pfn, PAGE_KERNEL_EXEC));
else
--
1.5.1.1.181.g2de0
next prev parent reply other threads:[~2007-04-30 16:04 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-04-30 15:46 [PATCH 0/12] Early USB debug port and i386 boot cleanups Eric W. Biederman
2007-04-30 15:48 ` [PATCH 01/12] x86_64: Allow fixmaps to be used with the initial page table Eric W. Biederman
2007-04-30 15:49 ` [PATCH 02/12] i386 head.S: Remove unnecessary use of %ebx as the boot cpu flag Eric W. Biederman
2007-04-30 15:51 ` [PATCH 03/12] i386 head.S: Always run the full set of paging state Eric W. Biederman
2007-04-30 15:57 ` [PATCH 04/12] i386 voyager: Use modern techniques to setup and teardown low identiy mappings Eric W. Biederman
2007-04-30 16:03 ` Eric W. Biederman [this message]
2007-04-30 16:09 ` [PATCH 06/12] i386: Minimum cpu detection cleanups Eric W. Biederman
2007-04-30 16:10 ` [PATCH 07/12] i386: Add missing !X86_PAE dependincy to the 2G/2G split Eric W. Biederman
2007-04-30 16:15 ` [PATCH 08/12] i386: Convert the boot time page tables to the kernels native format Eric W. Biederman
2007-04-30 16:26 ` Andi Kleen
2007-04-30 16:42 ` Eric W. Biederman
2007-04-30 16:32 ` [PATCH 09/12] i386/x86_64: EHCI usb debug port early printk support Eric W. Biederman
2007-04-30 16:32 ` [PATCH 10/12] i386: Introduce head32.c Eric W. Biederman
2007-04-30 16:33 ` [PATCH 11/12] i386: Move setup_idt from head.S to head32.c Eric W. Biederman
2007-04-30 16:35 ` [PATCH 12/12] i386: remove cpuid checking in head.S Eric W. Biederman
2007-04-30 17:56 ` [PATCH 09/12] i386/x86_64: EHCI usb debug port early printk support Andi Kleen
2007-04-30 20:54 ` Eric W. Biederman
2007-04-30 16:16 ` [PATCH 07/12] i386: Add missing !X86_PAE dependincy to the 2G/2G split H. Peter Anvin
2007-04-30 16:39 ` Eric W. Biederman
2007-04-30 16:13 ` [PATCH 06/12] i386: Minimum cpu detection cleanups H. Peter Anvin
2007-04-30 16:19 ` Andi Kleen
2007-04-30 16:21 ` [PATCH 05/12] i386: During page table initialization always set the leaf page table entries Andi Kleen
2007-04-30 16:34 ` Jeremy Fitzhardinge
2007-04-30 17:06 ` [PATCH 04/12] i386 voyager: Use modern techniques to setup and teardown low identiy mappings James Bottomley
2007-04-30 16:23 ` [PATCH 01/12] x86_64: Allow fixmaps to be used with the initial page table Andi Kleen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=m1r6q14zow.fsf_-_@ebiederm.dsl.xmission.com \
--to=ebiederm@xmission.com \
--cc=ak@suse.de \
--cc=akpm@linux-foundation.org \
--cc=davej@redhat.com \
--cc=hpa@zytor.com \
--cc=jeremy@goop.org \
--cc=linux-kernel@vger.kernel.org \
--cc=virtualization@lists.linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®