From: Alexander Hoogerhuis <alexh@ihatent.com>
To: linux-kernel@vger.kernel.org
Subject: 2.4.20-pre5-ac1 and Intel ICH3M EIDE woes
Date: 30 Aug 2002 23:42:08 +0200 [thread overview]
Message-ID: <m3elcguiq7.fsf@lapper.ihatent.com> (raw)
I used to run 2.5.x as my laptop has the Intel ICH3M chips in it, and
on the plain 2.4.x it would fail during boot claiming "resource
collisions". In 2.4.19-ac4 or thereabouts it seemed to have been fixed
the the ac-releases, and I ran happily with 2.4 again. After seeing a
lot of IDE rearrangements lately I thought it was time for a YANK (Yet
Another New Kernel), and the ICH3M seems unhappy again about resource
collisions:
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH3M: IDE controller at PCI slot 00:1f.1
PCI: Device 00:1f.1 not available because of resource collisions
PCI: Assigned IRQ 11 for device 00:1f.1
ICH3M: Not fully BIOS configured!
ICH3M: chipset revision 2
ICH3M: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x4440-0x4447, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x4448-0x444f, BIOS settings: hdc:DMA, hdd:pio
hda: TOSHIBA MK4019GAX, ATA DISK drive
hdc: SD-R2102, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: host protected area => 1
hda: 78140160 sectors (40008 MB), CHS=5168/240/63, UDMA(100)
hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, DMA
Uniform CD-ROM driver Revision: 3.12
Partition check:
hda: hda1 hda2 hda3
However, unlike back in 2.4.18, this time I can run hdparm and get it
to run in UDMA mode (instead of the default PIO mode) and get the
performance back.
Relevant bits of the .config:
lapper:~/src/linux/linux-2.4-test$ grep IDE .config | grep -v ^# | sort
CONFIG_BLK_DEV_IDECD_BAILOUT=y
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_BLK_DEV_IDEFLOPPY=m
CONFIG_BLK_DEV_IDE_MODES=y
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_BLK_DEV_IDESCSI=y
CONFIG_BLK_DEV_IDETAPE=m
CONFIG_BLK_DEV_IDE=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_IDEDISK_STROKE=y
CONFIG_IDEDMA_AUTO=y
CONFIG_IDEDMA_PCI_AUTO=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_IDE_TASKFILE_IO=y
CONFIG_IDE_TASK_IOCTL=y
CONFIG_IDE=y
CONFIG_IEEE1394_VIDEO1394=m
lapper:~/src/linux/linux-2.4-test$
mvh,
A
--
Alexander Hoogerhuis | alexh@ihatent.com
CCNP - CCDP - MCNE - CCSE | +47 908 21 485
"You have zero privacy anyway. Get over it." --Scott McNealy
next reply other threads:[~2002-08-31 13:40 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-08-30 21:42 Alexander Hoogerhuis [this message]
2002-08-31 15:07 ` Alan Cox
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=m3elcguiq7.fsf@lapper.ihatent.com \
--to=alexh@ihatent.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®