From: Johannes Thumshirn <jthumshirn@suse.de>
To: Charles Chiou <ch1102chiou@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>,
JBottomley@parallels.com, Oliver Neukum <oneukum@suse.de>,
grace.chang@tw.promise.com, linus.chen@tw.promise.com,
victor.p@promise.com, linux-scsi@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH 3/3] scsi:stex.c Add S3/S4 support
Date: Thu, 03 Sep 2015 16:03:54 +0200 [thread overview]
Message-ID: <mqd8u8nbnw5.fsf@c203.arch.suse.de> (raw)
In-Reply-To: <55E83F66.2060300@gmail.com> (Charles Chiou's message of "Thu, 03 Sep 2015 20:39:02 +0800")
Charles Chiou <ch1102chiou@gmail.com> writes:
> From f442518879f8f41d103b684046d912eca13844e7 Mon Sep 17 00:00:00 2001
> From: Charles <charles.chiou@tw.promise.com>
> Date: Wed, 2 Sep 2015 20:54:45 +0800
> Subject: [PATCH 3/3] scsi:stex.c Add S3/S4 support
>
> Add S3/S4 support, add .suspend and .resume function in pci_driver.
> In .suspend handler, driver send S3/S4 signal to the device.
>
> V2: Remove blank lines
>
> Signed-off-by: Charles Chiou <charles.chiou@tw.promise.com>
> ---
> drivers/scsi/stex.c | 59 ++++++++++++++++++++++++++++++++++++++++++++++++++---
> 1 file changed, 56 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/scsi/stex.c b/drivers/scsi/stex.c
> index 4ef0c80..c96a86d 100644
> --- a/drivers/scsi/stex.c
> +++ b/drivers/scsi/stex.c
> @@ -166,6 +166,13 @@ enum {
>
> ST_ADDITIONAL_MEM = 0x200000,
> ST_ADDITIONAL_MEM_MIN = 0x80000,
> + PMIC_SHUTDOWN = 0x0D,
> + PMIC_REUMSE = 0x10,
> + ST_IGNORED = -1,
> + ST_S3 = 3,
> + ST_S4 = 4,
> + ST_S5 = 5,
> + ST_S6 = 6,
> };
>
> struct st_sgitem {
> @@ -1733,7 +1740,7 @@ out_disable:
> return err;
> }
>
> -static void stex_hba_stop(struct st_hba *hba)
> +static void stex_hba_stop(struct st_hba *hba, int st_sleep_mic)
> {
> struct req_msg *req;
> struct st_msg_header *msg_h;
> @@ -1749,11 +1756,18 @@ static void stex_hba_stop(struct st_hba *hba)
> } else
> memset(req, 0, hba->rq_size);
>
> - if (hba->cardtype == st_yosemite || hba->cardtype == st_yel) {
> + if ((hba->cardtype == st_yosemite || hba->cardtype == st_yel)
> + && st_sleep_mic == ST_IGNORED) {
> req->cdb[0] = MGT_CMD;
> req->cdb[1] = MGT_CMD_SIGNATURE;
> req->cdb[2] = CTLR_CONFIG_CMD;
> req->cdb[3] = CTLR_SHUTDOWN;
> + } else if (hba->cardtype == st_yel && st_sleep_mic != ST_IGNORED) {
> + req->cdb[0] = MGT_CMD;
> + req->cdb[1] = MGT_CMD_SIGNATURE;
> + req->cdb[2] = CTLR_CONFIG_CMD;
> + req->cdb[3] = PMIC_SHUTDOWN;
> + req->cdb[4] = st_sleep_mic;
> } else {
> req->cdb[0] = CONTROLLER_CMD;
> req->cdb[1] = CTLR_POWER_STATE_CHANGE;
> @@ -1773,10 +1787,12 @@ static void stex_hba_stop(struct st_hba *hba)
> while (hba->ccb[tag].req_type & PASSTHRU_REQ_TYPE) {
> if (time_after(jiffies, before + ST_INTERNAL_TIMEOUT * HZ)) {
> hba->ccb[tag].req_type = 0;
> + hba->mu_status = MU_STATE_STOP;
> return;
> }
> msleep(1);
> }
> + hba->mu_status = MU_STATE_STOP;
> }
>
> static void stex_hba_free(struct st_hba *hba)
> @@ -1816,9 +1832,44 @@ static void stex_shutdown(struct pci_dev *pdev)
> {
> struct st_hba *hba = pci_get_drvdata(pdev);
>
> - stex_hba_stop(hba);
> + if (hba->supports_pm == 0)
> + stex_hba_stop(hba, ST_IGNORED);
> + else
> + stex_hba_stop(hba, ST_S5);
> +}
> +
> +static int stex_choice_sleep_mic(pm_message_t state)
> +{
> + switch (state.event) {
> + case PM_EVENT_SUSPEND:
> + return ST_S3;
> + case PM_EVENT_FREEZE:
> + case PM_EVENT_HIBERNATE:
> + return ST_S4;
> + default:
> + return ST_S4;
> + }
> +}
> +
> +static int stex_suspend(struct pci_dev *pdev, pm_message_t state)
> +{
> + struct st_hba *hba = pci_get_drvdata(pdev);
> +
> + if (hba->cardtype == st_yel && hba->supports_pm == 1)
> + stex_hba_stop(hba, stex_choice_sleep_mic(state));
> + else
> + stex_hba_stop(hba, ST_IGNORED);
> + return 0;
> }
>
> +static int stex_resume(struct pci_dev *pdev)
> +{
> + struct st_hba *hba = pci_get_drvdata(pdev);
> +
> + hba->mu_status = MU_STATE_STARTING;
> + stex_handshake(hba);
> + return 0;
> +}
> MODULE_DEVICE_TABLE(pci, stex_pci_tbl);
>
> static struct pci_driver stex_pci_driver = {
> @@ -1827,6 +1878,8 @@ static struct pci_driver stex_pci_driver = {
> .probe = stex_probe,
> .remove = stex_remove,
> .shutdown = stex_shutdown,
> + .suspend = stex_suspend,
> + .resume = stex_resume,
> };
>
> static int __init stex_init(void)
Looks OK from my side
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
--
Johannes Thumshirn Storage
jthumshirn@suse.de +49 911 74053 689
SUSE LINUX GmbH, Maxfeldstr. 5, 90409 Nürnberg
GF: Felix Imendörffer, Jane Smithard, Graham Norton
HRB 21284 (AG Nürnberg)
Key fingerprint = EC38 9CAB C2C4 F25D 8600 D0D0 0393 969D 2D76 0850
next prev parent reply other threads:[~2015-09-03 14:03 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-03 12:39 Charles Chiou
2015-09-03 14:03 ` Johannes Thumshirn [this message]
2016-01-29 11:23 ` Charles Chiou
2016-02-04 11:22 ` [Resend PATCH " Charles Chiou
2016-02-04 11:37 ` Oliver Neukum
2016-02-22 2:38 ` Charles Chiou
-- strict thread matches above, loose matches on Subject: below --
2015-09-03 1:50 [PATCH " Charles Chiou
2015-09-03 6:52 ` Johannes Thumshirn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=mqd8u8nbnw5.fsf@c203.arch.suse.de \
--to=jthumshirn@suse.de \
--cc=JBottomley@parallels.com \
--cc=ch1102chiou@gmail.com \
--cc=grace.chang@tw.promise.com \
--cc=hch@infradead.org \
--cc=linus.chen@tw.promise.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=oneukum@suse.de \
--cc=victor.p@promise.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®