On Mon, 26 Apr 2004 21:58:05 +0900, OGAWA Hirofumi  
<hirofumi@mail.parknet.co.jp> wrote:

> "Mirko Caserta" <mirko@mcaserta.com> writes:
>
>> eth0: Transmit timeout, status 0c 0005 c07f media 10.
>
> This problem looks like miss configuration of level/edge-triggerd, or
> IRQ-routing problem.
>
> The attached script may clarify the problem. Also "lspci -vvvxxx" and
> output of dmesg would be useful.

I have attached a tarball with output from dmesg, lspci -vvvxxx, cat  
/proc/interrupts and your dump_pirq.pl utility.

Please note that before booting the 2.6.6-rc2-mm2 kernel I got into the  
BIOS and disabled "Assign IRQ for USB" which is why lspci and dmesg show  
irq 0 assigned to the USB chips.

Besides that change in the BIOS, everything is just the same between the  
reboots, apart from the card not properly working in 2.6.6-rc2-mm2 :/

Anyway, it doesn't look like an irq problem to me. It looks more like a  
wrong detection of the TX triggering level in the driver.

Thanks again, Mirko.