From: pd <pdickson@att.net>
To: Steven Walter <srwalter@yahoo.com>
Cc: linux-kernel@vger.kernel.org
Subject: Re: PCI modem doesn't work after 2.4.2->2.4.10 upgrade
Date: Sat, 13 Oct 2001 23:21:58 -0400 [thread overview]
Message-ID: <p04320401b7eeb405a4a8@[12.79.180.246]> (raw)
In-Reply-To: <20011013190658.A32535@hapablap.dyn.dhs.org>
In-Reply-To: <01101319043002.01369@gabrielle.pdickson.newboston.nh.us> <20011013190658.A32535@hapablap.dyn.dhs.org>
>Unlike 2.4.2, 2.4.10 can automatically detect and configure PCI modems.
>That's why its already in use to setserial. The kernel has already
>found your modem, and assigned it ttyS4 (0-3 are reserved for the
>standard COM1-4). Theoretically, then, all you have to do is relink
>/dev/modem to /dev/ttyS4, and you should be set.
That is exactly what it turned out to be. Tnx. Works fine now.
>If you had read through 'dmesg', and the problem if what I suspect it
>is, you would have seen this pretty obviously.
I looked in dmesg and there it was, now that I know what to look for.
I also found a "redundant entry in serial pci_table" message and will
be sending the requested message off to serial-pci-info@lists.sourceforge.net.
--
-pd
next prev parent reply other threads:[~2001-10-14 3:37 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-10-13 23:04 pd
2001-10-14 0:06 ` Steven Walter
2001-10-14 3:21 ` pd [this message]
2001-10-14 4:31 ` William Park
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='p04320401b7eeb405a4a8@[12.79.180.246]' \
--to=pdickson@att.net \
--cc=linux-kernel@vger.kernel.org \
--cc=srwalter@yahoo.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®