From: Soeren Sonnenburg <kernel@nn7.de>
To: linux-kernel@vger.kernel.org
Subject: Re: pdc202xx_new + software raid0 freezes on array writes
Date: Wed, 15 Sep 2004 08:18:25 +0200 [thread overview]
Message-ID: <pan.2004.09.15.06.18.23.771355@nn7.de> (raw)
In-Reply-To: <20040914160530.GA729@evilgeek.net>
On Tue, 14 Sep 2004 16:05:30 +0000, Peter Mc Aulay wrote:
> Hi...
>
> [NOTE: Please CC replies to me personally as I'm not a list subscriber.
> Thank you.]
>
> I was wondering if anyone could help me at all with a little problem I'm
> having.
>
> I have 4 Western Digital 200GB hard disks (WDC WD2000JB) in a software
> RAID0 setup, two each connected to a Promise Ultra100TX2 (PDC20268) and
> an Ultra133TX2 (PDC20269) (pdc202XX_new driver compiled into the
> kernel). The system itself is a K6-2 450Mhz CPU on an ATX mainboard of
> unknown brand using the ALi M1541/5229 chipset (ALI15X3). It boots from
> a seperate Seagate (ST38410A) hard disk connected to the on-board
> controller.
I had the very same problems with the pdc20268 and also reported them
(that was 1-2 years ago)... I threw them away now and replaced them with
some hpt370 controllers... then also the problems went away...
However I found that using some device on the secondary controller and
accessing that one makes it freeze already...
Soeren
next prev parent reply other threads:[~2004-09-15 6:18 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-09-14 16:05 Peter Mc Aulay
2004-09-15 6:18 ` Soeren Sonnenburg [this message]
2004-09-15 16:07 ` Martin Josefsson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=pan.2004.09.15.06.18.23.771355@nn7.de \
--to=kernel@nn7.de \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome