Re: Highpoint IDE types

["Ville Syrjälä" <syrjala@sci.fi>]

On Fri, 11 Nov 2005 22:51:15 +0300, Sergei Shtylylov wrote:

> Hello.
> 
> Ville Syrjälä wrote:
>> On Tue, 08 Nov 2005 17:38:02 +0000, Alan Cox wrote:
> 
>>>Ok thanks to Sergei I can now post what I think is the complete table of
>>>HPT chip versions:
> 
>     Another correction coming in... :-)
> 
>>>        Chip                    PCI ID          Rev
>>> *      HPT366                  4 (HPT366)      0
>>> *      HPT366                  4 (HPT366)      1    
>>> *      HPT368                  4 (HPT366)      2      
>>> *      HPT370                  4 (HPT366)      3      
>>> *      HPT370A                 4 (HPT366)      4      
>>> *      HPT372                  4 (HPT366)      5     
>>> *      HPT372N                 4 (HPT366)      6     
>>> *      HPT372                  5 (HPT372)      0
>> 
>>           ^^^^^^
>> 
>> This one is called HPT372A by Highpoint's BIOS/Win drivers.
> 
>     According to Highpoint's driver code 372A has rev. ID 1...
> 
>> Also I'm not sure if it's relevant but PCI ID 5 chips use a different
>> BIOS image than PCI ID 4 chips.
>>        
>> 
>>> *      HPT372N                 5 (HPT372)      > 0     
> 
>     And 372N has rev. ID 2...

Right you are. Their opensource driver doesn't list any PCI ID 5,6 or 7
chips with revision 0. All rev 1 chips are apparently non-N models and all
rev 2 chips are N models.

-- 
Ville Syrjälä
syrjala@sci.fi
http://www.sci.fi/~syrjala/