From: Cen Zhang <zzzccc427@gmail.com>
To: marcel@holtmann.org, luiz.dentz@gmail.com
Cc: linux-bluetooth@vger.kernel.org, linux-kernel@vger.kernel.org,
baijiaju1990@gmail.com, jjzuming@gmail.com, zzzccc427@gmail.com
Subject: [PATCH v4 2/4] Bluetooth: SMP: Serialize forced BR/EDR channel changes
Date: Wed, 18 Nov 2026 12:21:36 +0800 [thread overview]
Message-ID: <pm-bluetooth-objects-candidate-0184-v11-900043ed2303656c76fe-2@gmail.com> (raw)
In-Reply-To: <pm-bluetooth-objects-candidate-0184-v11-900043ed2303656c76fe-0@gmail.com>
Debugfs disable Power-off
load smp_bredr_data
clear the same slot
release the channel
release the saved channel again
Take hdev->lock around the debugfs writer to serialize slot changes with
power-off. When HCI_UP is clear, change only the force flag and let the
next power-on register the root. Otherwise enabling the flag can leave a
listening channel that an already-down close never removes. Skip
deletion when power-off already cleared the slot.
The following registration change uses the same mutex to serialize this
writer with power-on too. The preceding publication change protects
lookups from another controller with the same address.
Oops report as below:
Oops: general protection fault, probably for non-canonical address
0xdffffc0000000001: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
Workqueue: hci1 hci_rx_work
RIP: 0010:l2cap_new_connection+0x16c/0x320
Call Trace:
<TASK>
l2cap_connect_cfm+0x46c/0xe60
hci_remote_ext_features_evt+0x67d/0xbd0
hci_event_packet+0x894/0xc70
hci_rx_work+0x367/0xf00
process_one_work+0x908/0x19c0
worker_thread+0x65c/0xe40
kthread+0x34f/0x460
ret_from_fork+0x659/0x940
ret_from_fork_asm+0x1a/0x30
</TASK>
KASAN report as below:
==================================================================
BUG: KASAN: slab-use-after-free in smp_del_chan+0xd2/0xe0
Read of size 8 at addr ffff888112a2e4a0 by task sh/493
Call Trace:
<TASK>
dump_stack_lvl+0x93/0xd0
print_report+0xce/0x630
kasan_report+0xe0/0x110
smp_del_chan+0xd2/0xe0
smp_force_bredr+0xda/0x200
force_bredr_smp_write+0xc9/0x130
full_proxy_write+0x11f/0x180
vfs_write+0x25a/0x1010
ksys_write+0x111/0x200
do_syscall_64+0x115/0x6a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
Allocated by task 493:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
__kasan_kmalloc+0xaa/0xb0
__kmalloc_cache_noprof+0x251/0x610
l2cap_chan_create+0x47/0x930
smp_add_cid+0x309/0x4f0
smp_force_bredr+0x17d/0x200
force_bredr_smp_write+0xc9/0x130
full_proxy_write+0x11f/0x180
vfs_write+0x25a/0x1010
ksys_write+0x111/0x200
do_syscall_64+0x115/0x6a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task 496:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3b/0x60
__kasan_slab_free+0x5f/0x80
kfree+0x307/0x580
l2cap_chan_put+0x273/0x3a0
smp_unregister+0x59/0xe0
hci_dev_close_sync+0x4c9/0x1150
hci_set_powered_sync+0x4a7/0x680
set_powered_sync+0xaa/0x150
hci_cmd_sync_work+0x1b3/0x450
process_one_work+0x908/0x19c0
worker_thread+0x65c/0xe40
kthread+0x34f/0x460
ret_from_fork+0x659/0x940
ret_from_fork_asm+0x1a/0x30
The buggy address belongs to the object at ffff888112a2e000
which belongs to the cache kmalloc-2k of size 2048
The buggy address is located 1184 bytes inside of
freed 2048-byte region [ffff888112a2e000, ffff888112a2e800)
==================================================================
Fixes: 300acfdec916 ("Bluetooth: Introduce force_bredr_smp debugfs option for testing")
Signed-off-by: Cen Zhang <zzzccc427@gmail.com>
---
Assisted-by: LLM
net/bluetooth/hci_debugfs.c | 2 ++
net/bluetooth/smp.c | 7 ++++++-
net/bluetooth/smp.h | 3 ++-
3 files changed, 10 insertions(+), 2 deletions(-)
diff --git a/net/bluetooth/hci_debugfs.c b/net/bluetooth/hci_debugfs.c
index cd5ef398f2382..f513731053d28 100644
--- a/net/bluetooth/hci_debugfs.c
+++ b/net/bluetooth/hci_debugfs.c
@@ -525,7 +525,9 @@ static ssize_t force_bredr_smp_write(struct file *file,
if (err)
return err;
+ hci_dev_lock(hdev);
err = smp_force_bredr(hdev, enable);
+ hci_dev_unlock(hdev);
if (err)
return err;
diff --git a/net/bluetooth/smp.c b/net/bluetooth/smp.c
index 948a847c0dc23..e605ee8d20586 100644
--- a/net/bluetooth/smp.c
+++ b/net/bluetooth/smp.c
@@ -3433,6 +3433,10 @@ int smp_force_bredr(struct hci_dev *hdev, bool enable)
if (enable == hci_dev_test_flag(hdev, HCI_FORCE_BREDR_SMP))
return -EALREADY;
+ /* A powered-off controller has no registered SMP roots. */
+ if (!test_bit(HCI_UP, &hdev->flags))
+ goto done;
+
if (enable) {
struct l2cap_chan *chan;
@@ -3441,7 +3445,7 @@ int smp_force_bredr(struct hci_dev *hdev, bool enable)
return PTR_ERR(chan);
hdev->smp_bredr_data = chan;
- } else {
+ } else if (hdev->smp_bredr_data) {
struct l2cap_chan *chan;
chan = hdev->smp_bredr_data;
@@ -3449,6 +3453,7 @@ int smp_force_bredr(struct hci_dev *hdev, bool enable)
smp_del_chan(chan);
}
+done:
hci_dev_change_flag(hdev, HCI_FORCE_BREDR_SMP);
return 0;
diff --git a/net/bluetooth/smp.h b/net/bluetooth/smp.h
index 0537762e2775e..22eabda930ef4 100644
--- a/net/bluetooth/smp.h
+++ b/net/bluetooth/smp.h
@@ -195,7 +195,8 @@ bool smp_irk_matches(struct hci_dev *hdev, const u8 irk[16],
int smp_generate_rpa(struct hci_dev *hdev, const u8 irk[16], bdaddr_t *rpa);
int smp_generate_oob(struct hci_dev *hdev, u8 hash[16], u8 rand[16]);
-int smp_force_bredr(struct hci_dev *hdev, bool enable);
+int smp_force_bredr(struct hci_dev *hdev, bool enable)
+ __must_hold(&hdev->lock);
int smp_register(struct hci_dev *hdev);
void smp_unregister(struct hci_dev *hdev);
next prev parent reply other threads:[~2026-11-18 4:22 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-18 4:21 [PATCH v4 0/4] Bluetooth: SMP: Serialize root channel updates Cen Zhang
2026-11-18 4:21 ` [PATCH v4 1/4] Bluetooth: SMP: Publish root channels after initialization Cen Zhang
2026-11-18 4:21 ` Cen Zhang [this message]
2026-11-18 4:21 ` [PATCH v4 3/4] Bluetooth: hci_core: Hold the request lock for the power-on update Cen Zhang
2026-11-18 4:21 ` [PATCH v4 4/4] Bluetooth: SMP: Serialize root channel replacement Cen Zhang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=pm-bluetooth-objects-candidate-0184-v11-900043ed2303656c76fe-2@gmail.com \
--to=zzzccc427@gmail.com \
--cc=baijiaju1990@gmail.com \
--cc=jjzuming@gmail.com \
--cc=linux-bluetooth@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=luiz.dentz@gmail.com \
--cc=marcel@holtmann.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®