From: Takashi Iwai <tiwai@suse.de>
To: Ezequiel Garcia <elezegarcia@gmail.com>
Cc: linux-kernel@vger.kernel.org, alsa-devel@alsa-project.org,
Ralf Baechle <ralf@linux-mips.org>,
Jaroslav Kysela <perex@perex.cz>,
Clemens Ladisch <clemens@ladisch.de>
Subject: Re: [PATCH 2/3] swarm_cs4297: Rename AC97 registers to use sound/ac97_codec.h definitions
Date: Tue, 19 Jun 2012 14:47:36 +0200 [thread overview]
Message-ID: <s5h1ulbjwnr.wl%tiwai@suse.de> (raw)
In-Reply-To: <CALF0-+WxqMmoPMGjMZBBiKq2NR5qPESo6mA0B4MPhdyc_KUNsw@mail.gmail.com>
At Tue, 19 Jun 2012 09:41:30 -0300,
Ezequiel Garcia wrote:
>
> On Tue, Jun 19, 2012 at 2:38 AM, Takashi Iwai <tiwai@suse.de> wrote:
> > At Mon, 18 Jun 2012 14:50:53 -0300,
> > Ezequiel Garcia wrote:
> >>
> >> Hi Takashi,
> >>
> >> On Mon, Jun 18, 2012 at 11:04 AM, Takashi Iwai <tiwai@suse.de> wrote:
> >> > At Mon, 11 Jun 2012 16:58:50 -0300,
> >> > Ezequiel Garcia wrote:
> >> >>
> >> >> This patch removes the last usage of linux/ac97_codec.h
> >> >> by renaming ac97 registers to use sound/ac97_codec.h definitions.
> >> >> This will enable us to remove linux/ac97_codec.h.
> >> >>
> >> >> Not even compilation tested.
> >> >>
> >> >> Cc: Ralf Baechle <ralf@linux-mips.org>
> >> >> Cc: Jaroslav Kysela <perex@perex.cz>
> >> >> Cc: Takashi Iwai <tiwai@suse.de>
> >> >> Cc: Clemens Ladisch <clemens@ladisch.de>
> >> >> Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com>
> >> >> ---
> >> >> Hi all,
> >> >>
> >> >> This patch is important so we can remove linux/ac97_codec.h usage.
> >> >> Since this driver is mips related, I can't test it until I install
> >> >> a mips toolchain.
> >> >> If someone can compile this for me, or even test it with real
> >> >> hardware I think it would be better.
> >> >> If not then I can install a mips toolchain and compile it myself,
> >> >> but I won't be able to test it on real hardware.
> >> >>
> >> >> This patch should be treated with carefully and be applied only
> >> >> if someone manages to test it.
> >> >
> >> > A slight concern by this change is that the driver includes
> >> > sound/ac97_codec.h although it's based on OSS framework.
> >> > sound/ac97_codec.h is the header for ALSA ac97 structs, and this can't
> >> > be mixed up with OSS.
> >> >
> >> > If the intention is only about AC97 register definition, we may split
> >> > ac97_codec.h into ac97_regs.h and ac97_codecs.h where the former
> >> > contains only the register definitions (thus framework-neutral) and
> >> > the latter includes the former.
> >> >
> >> >
> >>
> >> Yes, splitting sounds good to me. It could be useful for other ac97
> >> drivers (e.g. em28xx).
>
> On a second thought, I'm not sure splitting the header is the best way
> to proceed. Since swarm just uses some AC97 register definition
> maybe we could just duplicate those (less than ten) macros in swarm
> c file.
>
> It's a less intrusive aproach and it allows us to remove the unused
> linux/ac97_codec.h.
I'm OK in both ways.
Takashi
next prev parent reply other threads:[~2012-06-19 12:47 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-06-11 19:58 [PATCH 1/3] maestro3: Remove unused AC97 register definitions Ezequiel Garcia
2012-06-11 19:58 ` [PATCH 2/3] swarm_cs4297: Rename AC97 registers to use sound/ac97_codec.h definitions Ezequiel Garcia
2012-06-18 14:04 ` Takashi Iwai
2012-06-18 17:50 ` Ezequiel Garcia
2012-06-19 5:38 ` Takashi Iwai
2012-06-19 12:41 ` Ezequiel Garcia
2012-06-19 12:47 ` Takashi Iwai [this message]
2012-06-19 19:13 ` Ezequiel Garcia
2012-07-07 23:06 ` Maciej W. Rozycki
2012-06-11 19:58 ` [PATCH 3/3] Remove unused include/linux/ac97_codec.h header Ezequiel Garcia
2012-06-18 14:06 ` [PATCH 1/3] maestro3: Remove unused AC97 register definitions Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=s5h1ulbjwnr.wl%tiwai@suse.de \
--to=tiwai@suse.de \
--cc=alsa-devel@alsa-project.org \
--cc=clemens@ladisch.de \
--cc=elezegarcia@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=perex@perex.cz \
--cc=ralf@linux-mips.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®