From: Takashi Iwai <tiwai@suse.de>
To: Marc Koschewski <marc@osknowledge.org>
Cc: Jeff Chua <jeff.chua.linux@gmail.com>,
Linus Torvalds <torvalds@linux-foundation.org>,
"Rafael J. Wysocki" <rjw@sisk.pl>,
Chris Wilson <chris@chris-wilson.co.uk>,
Len Brown <lenb@kernel.org>, LKML <linux-kernel@vger.kernel.org>
Subject: Re: Commit 500f7147cf5bafd139056d521536b10c2bc2e154 breaks _resume_
Date: Sun, 06 Feb 2011 14:19:54 +0100 [thread overview]
Message-ID: <s5h4o8hwb9h.wl%tiwai@suse.de> (raw)
In-Reply-To: <20110206122408.GD22960@marc.osknowledge.org>
At Sun, 6 Feb 2011 13:24:08 +0100,
Marc Koschewski wrote:
>
> Read this
>
> [REGRESSION g01539ba] Hibernate broken on T510i
>
> or this
>
> [REGRESSION] S3 resume on SandyBridge doesn't work with NX protection (5bd5a45)
But this should be definitely irrelevant with i915 fixes I've been
involved with. The NX problem already existed in rc1, IIRC.
I wonder what problem is fixed for Jeff.
thanks,
Takashi
Takashi
>
> Marc
>
> * Takashi Iwai <tiwai@suse.de> [2011-02-06 12:00:15 +0100]:
>
> > At Sun, 6 Feb 2011 09:50:51 +0800,
> > Jeff Chua wrote:
> > >
> > > On Sun, Feb 6, 2011 at 2:24 AM, Rafael J. Wysocki <rjw@sisk.pl> wrote:
> > > >> The suspend monster is back! The suspend-to-ram is fine, but upon
> > > >> resume, screen is blank. Haven't bisected in case someone has also
> > > >> done so.
> > > >
> > > > BTW, please don't reply to messages containing patches with reports of problems
> > > > that aren't caused by those patches. It's confusing at best and at worst it
> > > > may result in the patches being rejected.
> > >
> > > Sorry. New subject now:)
> > >
> > >
> > > On Sun, Feb 6, 2011 at 2:51 AM, Linus Torvalds
> > > <torvalds@linux-foundation.org> wrote:
> > > >> It's very recent. ... between commit
> > > >> 831d52bc153971b70e64eccfbed2b232394f22f8 and
> > > >> 44f2c5c841da1b1e0864d768197ab1497b5c2cc1.
> > > >
> > > > Hmm. It's almost certainly one of the DRI patches, but which one? I
> > > > think bisection is the only way to figure it out. It shouldn't be too
> > > > bad, since there's only 120 commits in that range.
> > > >
> > > > In fact, you can almost certainly just bisect from 89840966c579 to
> > > > bb5b583b5279, which is just 31 commits and should get you bisected in
> > > > just five tries or so.
> > >
> > > Yea, I've just done that. It came down to the following commit.
> > > Reverting it solves the problem. I've gone thru a few cycles, and
> > > notebook still survives.
> >
> > Hrm, what is the symptom? I couldn't find it because you cut off the
> > thread, and it's not cited.
> >
> > The commit you mentioned just adds an interface, and the the callbacks
> > aren't defined. The real change is either in
> > commit f3269058e7a80083dcdf89698bfcd1a6c6f8fd12
> > drm/i915/crt: Force the initial probe after reset
> > or
> > commit 5d1d0cc87fc0887921993ea0742932e0c8adeda0
> > drm/i915: Reset crtc after resume
> >
> > Also the fix might interact with
> > commit 811aaa55ba21ab37407018cfc01770d6b037d3fb
> > drm: Only set DPMS ON when actually configuring a mode
> >
> >
> > thanks,
> >
> > Takashi
> >
> > >
> > > Thanks,
> > > Jeff
> > >
> > >
> > > commit 500f7147cf5bafd139056d521536b10c2bc2e154
> > > Author: Chris Wilson <chris@chris-wilson.co.uk>
> > > Date: Mon Jan 24 15:14:41 2011 +0000
> > >
> > > drm/i915: Reset state after a GPU reset or resume
> > >
> > > Call drm_mode_config_reset() after an invalidation event to restore any
> > > cached state to unknown.
> > >
> > > Tested-by: Takashi Iwai <tiwai@suse.de>
> > > Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
> > >
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> > the body of a message to majordomo@vger.kernel.org
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
> > Please read the FAQ at http://www.tux.org/lkml/
> >
> >
>
> --
> Marc Koschewski
>
next prev parent reply other threads:[~2011-02-06 13:19 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-02-06 1:50 Jeff Chua
2011-02-06 8:19 ` Marc Koschewski
2011-02-06 11:02 ` Takashi Iwai
2011-02-06 11:06 ` Dave Airlie
2011-02-06 12:21 ` Marc Koschewski
2011-02-06 13:04 ` Rafael J. Wysocki
2011-02-06 13:44 ` Marc Koschewski
2011-02-06 13:55 ` Rafael J. Wysocki
2011-02-06 11:00 ` Takashi Iwai
2011-02-06 12:24 ` Marc Koschewski
2011-02-06 13:19 ` Takashi Iwai [this message]
2011-02-06 14:01 ` Jeff Chua
2011-02-06 14:47 ` Chris Wilson
2011-02-06 14:51 ` Jeff Chua
2011-02-06 14:49 ` Jeff Chua
2011-02-06 15:27 ` Chris Wilson
2011-02-07 4:48 ` Jeff Chua
2011-02-07 5:02 ` Jeff Chua
2011-02-07 8:25 ` Takashi Iwai
2011-02-07 8:36 ` Jeff Chua
2011-02-07 8:45 ` Jeff Chua
2011-02-07 8:54 ` Takashi Iwai
2011-02-07 8:52 ` Takashi Iwai
2011-02-07 10:15 ` Takashi Iwai
2011-02-07 13:38 ` Jeff Chua
2011-02-07 14:11 ` Jeff Chua
2011-02-07 21:20 ` Rafael J. Wysocki
2011-02-08 1:40 ` Jeff Chua
2011-02-08 13:36 ` Chris Wilson
2011-02-09 0:55 ` Jeff Chua
2011-02-09 1:05 ` Jeff Chua
2011-02-09 2:56 ` Indan Zupancic
2011-02-09 5:45 ` Jeff Chua
2011-02-09 9:42 ` Indan Zupancic
2011-02-09 9:32 ` Chris Wilson
2011-02-09 10:20 ` Indan Zupancic
2011-02-07 10:02 ` Marc Koschewski
2011-02-07 10:06 ` Takashi Iwai
2011-02-07 10:09 ` Marc Koschewski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=s5h4o8hwb9h.wl%tiwai@suse.de \
--to=tiwai@suse.de \
--cc=chris@chris-wilson.co.uk \
--cc=jeff.chua.linux@gmail.com \
--cc=lenb@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marc@osknowledge.org \
--cc=rjw@sisk.pl \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®